Team:Bielefeld-Germany/Biosafety/Biosafety System

From 2013.igem.org

Revision as of 12:37, 19 October 2013 by Tore (Talk | contribs)



Biosafety System


Overview

IGEM Bielefeld 2013 Biosafety E.coli bewaffnet safe 2..png

Biosafety is an important aspect of Synthetic Biology, because it deals with the interaction of the environment and mankind. Several studies deal with the interaction of genetically modified bacteria and natural wild types. Mostly with the result that genetically modified bacteria does not influence the environment, but there is always a risk remaining (Snow, 2005). Because the genetically modified bacteria are adapted to the excellent conditions of the laboratory, the natural bacteria will outlast this modified strains in nature. So the genetically modified bacteria will not survive because of their evolutionary disadvantage. But there is no guarantee that there is really no interaction and that their release does not effect the equilibrium of the environment. To avoid these problems we also thought of a cell free fuel cell based on enzymes, but this is even more complex and would not be as efficient because of the limited activity of the enzymes. So the questions was, how will an approach as our microbial fuel cell, with genetic modified bacteria for a higher production of energy find application outside the laboratory, without adversely effecting the nature?
The answers of this question can be found in our Safety-System. This new approach opens the possibility of controling the cell division of living bacteria in a defined environment like the MFC. The Biosafety-System ensures that the genetically modified bacteria can only survive in the defined zone, while they die when they leave this area by accident or damage of the MFC chassi.
Basicly our Biosafety-System takes advantage of two common Biosafety-ideas, namely auxotrophic strain and a toxic gene product. Our approach combines both in only one system. Namely constructed Biosafety-System takes the best of this two approaches by establishing an new useful auxotrophy and a new toxic gene product in the parts registry and is additional characterized as the first registered double kill-switch system. By using two different kill-switches, each individual switch can be a back-up and our Biosafety-System additionally provides additional a higher plasmid stability and a higher resistance towards undesirable mutations in the Safety-System. In one sentence: Our Biosafety-System is safe!




Theory


The auxotrophic Safety-Strain E. coli K-12 ∆alr ∆dadX ∆araC is the basic of our three Safety-Systems Lac of growth, TetOR alive and araCtive. In this new constructed Safety-Strain the constitutive Alanine-Racemase (alr) and the catabolic Alanine- Racemase (dadX) are deleted. As the Alanine-Racemase catalyses the reversible isomeration from L-alanine into the enantiomer D-alanine the Safety-strain is no longer able to synthesize the essential amino acid D-alanine. D-alanine is an essential molecule for the Gram-negative bacteria E. coli, because it is responsible for the cross-linkage of the peptidoglycan layer, so that a lack of D-alanine inhibits cell division and leads to cell lysis in growing bacteria. This effect is comparable to bacteristatic characteristic known from beta-lactam-antbiotics.
By complementation of the Alanine-Racemase (alr) via plasmid, the supplementation of D-alanine is not any more necessary for the Biosafety-Strain. But as the complementation is essential for bacterial cell division, it can be used as an antibiotic-free selection System.
When expressing toxic gene products like the Rnase Ba (Barnase) or Colicin E2, the maintenance of the plasmid stability is a very important parameter. And in a Biosafety-System it is even more important than in industrial cultivation, because the loss of the plasmid containing the Biosafety- System causes failing of the whole Biosafety-System. This situation is avoided in the Biosafety- System by the complementation of the Alanine-Racemase in the Biosafety-Strain K-12 ∆alr ∆dadX ∆araC. If these mutants will loose the plasmid, caused by the stress of the toxic gene product, they will not be able to grow, because the bacteria can not synthesize D-alanine for the peptidoglycan layer of the cell wall.
In general the Biosafety-System can be divided into two parts, which are regulated by different inducible promoters. The first part contains the essential Alanine-Racemase (alr) and the corresponding repressor for the promoter of the second part. Both genes a regulated by the rhamnose inducible promoter pRhaBAD (<bbpart>BBa_K914003</bbpart>). The second part of the Biosafety-System contains another promoter which depends on the Safety-System. The Biosafety-System araCtive for example uses the arabinose promoter pBAD. This promoter controls in the final version the expression of the toxic RNAse Ba (<bbpart>BBa_K1172904</bbpart>), but for the testing and comparison of the different Biosafety-systems GFP (<bbpart>BBa_E0040</bbpart>) was used in all of the Systems instead. This way a selection of the best designed Biosafety-System is possible without direct natural selection by the Biosafety-System itself.


Figure 2: The Biosafety-System in the presens of L-Rhamnose. The essentail Alanine-Racemase (alr) and the repressor are expressed, so that the expression of the RNAse Ba is repressed and the Bacteria grow.


As shown in Figure 2 above, the Biosafety-Strain survives only under defined conditions by supplementation of L-Rhamnose to the media. L-Rhamnose induces the expression of the Alanin- Racemase, so that the bacteria can grow, and the expression of the repressor, which inhibits the expression of the toxic Barnase. To establish a functional Biosafety-System we first compared three different System (araCtive, TetOR alive and Lac of Growth) by variations of the repressor and the corresponding promoter to measure the basal transcription and repression of the second part. This is necessary for the first fine tuning of the Biosafety-System, as it was not clear how high the expression level of the Barnase could be without causing cell death. With GFP it was therefore possible to get a first impression of how low the transcription of the Barnase would be in the repressed situation.
In contrast, when there is no L-Rhamnose present in the media or the concentration of L-Rhamnose decreases because of the natural Rhmanose catabolism of the Biosafety-Strain K-12 ∆alr ∆dadX ∆araC, the expression of the first part with the Alanine-Racemase (alr) and the repressor decreases (see Figure 3 below). This leads to an activation of the second promoter. Also for this situation the testing with GFP was necessary before the usage of the toxic Barnase.Barnase, in order to get an impression how high the expression of the Barnase would be.


Figure 3:The Biosafety-System outside the defined conditions and a decreased concentration of L-Rhamnose. The expression of the Alanine-Racemase and the repressor is reduced. In contrast the expression of the RNase ba (Barnase) is sligthly turned on, leading to cell death by RNA cleavage.


An additional profit of the Biosafety-System is not shown in the figure above. As mentioned before a problem of Biosafety-System is the possible loss of the plasmid. This problem is solved in the Biosafety-System by the complementary function of the Alanine-Racemase. Another possible weakness of common Biosafety-Systems is the failure by mutations. Even if the plasmid stability is present, a mutation in the toxic gene or on its promoter leads to a shut-down of the gene and the Biosafety- System collapses. In this situation the excisting Biosafety-System is not safe anymore.Figure 4 shows the solution.


Figure 4: Double-kill switch mechanism of the Biosafety-System. When there is no L-Rhamnose and the toxic RNase Ba is inactivated by a mutation the repressed Alanine-Racemase (alr) stops the cell divison.


As visualized in Figure 4 above, this problem is solved in our Biosafety-System by using once again the advantage of the Biosafety-Strain E. coli K-12 ∆alr ∆dadX ∆araC and the Alanine-Racemase (alr). Because additionally to the fact that in the absence of L-Rhamnose the expression of the toxic Barnase is activated, the expression of the Alanine-Racemase is continuously shut down causing a lack of cell growth additionally to the Barnase!
This huge advantage of this double kill-switch makes the whole Safety-System more resistance against mutations and therefor safe. The mutations that are not affecting the safety of the system underlie the natural selection and dissapear. For example a mutation in the repressor, which leads to its inactivation, will causes cell death by activation of the toxic Barnase, or a mutation of the Alanine-Racemase will stop the cell division. But any mutation that normally affect the safety of the system and will lead to failure and can be abolished by the double kill-switch. This concerns mutations that will shutdown the toxic effect of the Barnase by mutation in the promoter of the second part or the Barnase itself. An inactivation of the Barnase can be compensated by the repressed Alanine-Racemase (alr) in the absence of L-Rhamnose. So the only leaky point in the Biosafety- System occurs when the Rhamnose promoter becomes constitutive. As this sequence is only 200 bp short and the chance that the Rhamnose promoter rhaBAD will become constitutive is very, very low, because it is tightly shutdown naturally and only activated positively by L-Rhamnose. So in conclusion the Biosafety-System is safe!



Results

Figure 5: Comparision of the metabolic pressure of the three Biosafety-Systems. Shown are the induced bacteria on M9 minimal media. It is obvious that the metabolic pressure of all Biosafety-Systems is about the same.
Figure 6: Comparision of the specific production rate of the three Biosafety-Systems. Shown are the induced bacteria on M9 minimal media. The Biosafety-System araCtive shows the lowest basal transcription followed by the Biosafety-System Lac of Growth and TetOR alive.
Figure 7: Comparision of all three Biosafety-Systems. The figure shows the specific production rate of the induced (1% L-Rhamnose) Biosafety-System (marked with a star) and the uninduced Biosafety-Systems.


References

  • Snow A., Andow D., Gepts P., Hallerman E., Power A., Tiedje J. and Wolfenbarger L. (2005) Genetically Engineered Organisms And The Environment: Current Status And Recommendations. Ecological Applications 15:377 – 404.









Contents