Team:Glendale CC AZ/Protocols/GrowthCurve

From 2013.igem.org

(Difference between revisions)
Line 453: Line 453:
     * Spectrophotometer at 590 nm 37°C water bath
     * Spectrophotometer at 590 nm 37°C water bath
====Procedures====
====Procedures====
-
1.Add approximately 6 drops of the BHI into a spectrophotometer tube; this will be the blank tube.
+
 
-
2.Add about 6 drops of BHI into a spectrophotometer tube and and another 6 drops of the E.coli broth into the same tube; this will be experimental tube.
+
1. Add approximately 6 drops of the BHI into a spectrophotometer tube; this will be the blank tube.
-
3.Rad the blank tube on the spectrophotometer and blank the system at 590 nm.
+
2. Add about 6 drops of BHI into a spectrophotometer tube and and another 6 drops of the E.coli broth into the same tube; this will be experimental tube.
 +
3. Rad the blank tube on the spectrophotometer and blank the system at 590 nm.
4. Read the experimental tube at 590 nm and record the data.
4. Read the experimental tube at 590 nm and record the data.
-
5.Incubate the experimental tube for 20 minutes at 37°C.
+
5. Incubate the experimental tube for 20 minutes at 37°C.
-
6.Once the incubation is complete, read the experimental tube on the spectrophotometer and record the data.
+
6. Once the incubation is complete, read the experimental tube on the spectrophotometer and record the data.
-
7.Repeat steps 5-6  as many times as desired to get a good growth curve.
+
7. Repeat steps 5-6  as many times as desired to get a good growth curve.
8. Graph the data accordingly.
8. Graph the data accordingly.

Revision as of 02:56, 23 September 2013

Glendale Community College ArizonaGCC

Protocols

iGEM Growth Curve Assay

NaCl Growth Curve Assay

Survival Growth Assay

Alkaline Lysis Plasmid Miniprep

Restriction Digest

DNA Isolation

Bioinformatics

Ligation

Transformation

E.coli Bacterial Growth Curve Assay Protocol

Materials

   * 1 brain-heart infusion (BHI) broth culture of 5h E.coli
   * 1 tube with 5.0 ml BHI broth
   * Spectrophotometric tubes
   * Plastic disposable pipettes
   * Spectrophotometer at 590 nm 37°C water bath

Procedures

1. Add approximately 6 drops of the BHI into a spectrophotometer tube; this will be the blank tube. 2. Add about 6 drops of BHI into a spectrophotometer tube and and another 6 drops of the E.coli broth into the same tube; this will be experimental tube. 3. Rad the blank tube on the spectrophotometer and blank the system at 590 nm. 4. Read the experimental tube at 590 nm and record the data. 5. Incubate the experimental tube for 20 minutes at 37°C. 6. Once the incubation is complete, read the experimental tube on the spectrophotometer and record the data. 7. Repeat steps 5-6 as many times as desired to get a good growth curve. 8. Graph the data accordingly.