Team:Rutgers/Safety

From 2013.igem.org

Revision as of 02:39, 28 September 2013 by Svensken (Talk | contribs)

Rutgers Safety (important!)

I. Would any of your project ideas raise safety issues in terms of?

Researcher Safety
Use of hazardous chemicals: Ethidium Bromide (EtBr)

Public Safety 
None

Environmental Safety? 
None

Security Threats? 
None

Our projects are involved with Quorum pathways and autoinducer detection. By themselves they pose no risk to anyone.

II. Do any of the new biobrick parts (or devices) that you made this year raise any safety issues? If yes,

For the parts that are already in the registry no safety issues have been encountered.  The five BioBrick parts we are creating from scratch are transcriptional regulators and genes which should not raise any safety issues

III. UNDER WHAT BIOSAFETY PROVISIONS WILL / DO YOU OPERATE?

Does your institution have its own biosafety rules and if so what are they? Provide a link to them online if possible. 

Rutgers Environmental Health and Safety (REHS) regulates protocols and waste disposal methods used by federally funded research projects. 
(REHS:http://rehs.rutgers.edu/lsbio_comm.html)


Is there a local biosafety group, committee, or review board at your institution?

REHS provides oversight and training for various hazards such as medical waste, hazardous waste, and radioactive waste. Dr Vershon, our PI, reviewed our project for possible safety issues; he did not find any. He also informed us of the labs procedures for disposing waste and general safety procedures. 

The procedures have all been reviewed by REHS and are approved under the Recombinant DNA RD-00-029 (11/28/2000 – 12/31/2015) issued to Dr. Vershon by REHS.


Does your country have national biosafety regulations or guidelines? If so, provide a link to them online if possible. 

Yes, the NIH has guidelines for biosafety available here:
http://oba.od.nih.gov/oba/rac/guidelines_02/NIH_Gdlnes_lnk_2002z.pdf

IV. DO YOU HAVE ANY OTHER IDEAS HOW TO DEAL WITH SAFETY ISSUES THAT COULD BE USEFUL FOR FUTURE IGEM COMPETITIONS? HOW COULD PARTS, DEVICES AND SYSTEMS BE MADE EVEN SAFER THROUGH BIOSAFETY ENGINEERING?

Laboratory Approach:

  • If extra money is available, Crystal Violet and other dyes are much safer and more accurate alternatives to EtBr.
  • Come up with an alternative to Bleach to clean out E.coli from the sink and waterways.
  • Use autoclavable/sterile materials instead of gratuitous amounts of plastic every day.

Software Approach:

  • Software that scans bricks for potentially hazardous DNA sequences
  • Software that calculates risk of mutation that could create a potentially hazardous DNA sequence.

GENERAL LABORATORY RULES

Guidelines

  • No eating, drinking, smoking, applying cosmetics, etc. in the lab. 
  • Access to the laboratory is restricted to only when Dr. Vershon or Dr. Mead from the Vershon lab is present. 
  • Please do not bring friends into the lab (Dr. Vershon has our roster. If we add new members we will okay it with him before they are allowed in the lab).
  • Work areas should be cleaned after any chemical spill.
  • Mechanical pipeting devices are always used.  Mouth pipeting is not permitted.
  • Hands should be washed before and after working in the laboratory.
  • Disposable gloves should be worn when working with hazardous chemicals such as EtBr.  Lab coats must be worn in the lab to protect your street clothes from contamination.  Lab coats should not be worn outside of the laboratory. 
  • Shorts and sandals are not permitted in the lab.
  • Waste must be disposed of properly (see Waste Disposal on p.1-5).
  • Sterility/aseptic techniques
  • Pipette tip boxes and microfege tube bags must always be tightly closed.
  • Media and reagent bottles must always be capped tightly.

Common courtesy

  • If you are using Dr. Vershon’s supplies (i.e. media, plates, reagents) always inform someone when supplies are very low. Don’t take the last bottle!
  • Help out making media when requested.
  • Sterile solutions should not be returned to the general stocks.
    (Source: iGEM-Lab1-Pipeting; Vershon, 2012)

Storage and Saving

Incubator (37 C)

  • Plates should be incubated agar side up, properly labeled and documented in the lab notebook!
  • Liquid cultures should be tightly capped, properly labeled and documented in the lab notebook!
  • Turn on shaker after taking off your samples!
  • Turn off light after leaving the room.

Room Temperature (20 C - 25 C)

  • DNA Kit (with lyophilized DNA)
  • Ethanol
  • Concentrated Buffers

Refridgerator(4 C)

  • Plates (agar side up, properly labeled and documented in the lab notebook!)
  • Liquid cultures (tightly capped, properly labeled and documented in the lab notebook!)
  • DNA (i.e. un-lyophilized DNA)
  • Buffers
  • Media

Freezer (-20 C)

  • Most restriction enzymes (always read the label!)

Low-temperature freezer (-80 C)

  • Frozen cultures (properly labeled and documented in the lab notebook!)

Light sensitive

  • Tetracycline is light sensitive and should be saved in the refridgerator with foil around it and tape.
  • If a bottle is brown, it is light sensitive and should stay this way.

Cleaning Up
Generally, make sure everything in the lab is in order. Cover things so they may not collect dust. Always close pipet tip boxes and bags with microfuge tubes to maintain their sterility. Keep autoclaved bottles tightlyclosed.

Glassware

  • All tubes must be washed out in Waksman Room 234. Place the glass tube and the cap in its appropriate basket.

Disposables

  • If it’s made out of plastic and you do not need it, it’s probably garbage.
  • Make sure before throwing out tubes that you are absolutely sure you don’t need it.
  • If you are continuing someone elses experiment and/or you are not sure whether to save the tube, save, label and store it in the refrigerator just in case.

Refrigerator/freezers

  • All refrigerator/freezer contents must be labeled properly and documented in the lab notebook.
  • Tape plates together if they are related. Try not to tape only one side of the stack because if it falls apart or just falls, it gets messy. Reuse tape when you can and again, label the tape.
  • All tubes must be capped tightly.

Biohazard (E. coli)

  • Add (a small amount) of chlorine bleach to waste containers and let it sit for a bit before discarding it down the sink.

The drawers are now labeled with respect to their contents, please keep them this way. The window should be shut completely if you have opened it. Place all books back on the shelf. Place all lab notebooks and protocols in the brown binder. Wipe the bench with some ethanol at the end of the day.


References

Barker, Kathy. At The Bench: A Laboratory Navigator. New York: Cold Spring Harbor Laboratory, 1998. Print.

Rastogi, Smita, and Neelam Pathak. Genetic Engineering. New Delhi: Oxford UP, 2009. Print.

Seidman, Lisa A., and Cynthia J. Moore. Basic Laboratory Methods for Biotechnology: Textbook and Laboratory Reference. San Francisco: Pearson/Benjamin Cummings, 2009. Print.

Nelson, David L., Albert L. Lehninger, and Michael M. Cox. Lehninger Principles of Biochemistry. New York: W.H. Freeman, 2008. Print.

Vershon, Andrew, Barth Grant, Bryce Nickels, and Janet Mead. Introduction to Research in Genetics Laboratory Manual, Spring 2012. Print.