Team:Shenzhen BGIC ATCG/Modeling

From 2013.igem.org

Revision as of 05:59, 18 September 2013 by Samantha (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


This is a template page. READ THESE INSTRUCTIONS.
You are provided with this team page template with which to start the iGEM season. You may choose to personalize it to fit your team but keep the same "look." Or you may choose to take your team wiki to a different level and design your own wiki. You can find some examples HERE.
You MUST have all of the pages listed in the menu below with the names specified. PLEASE keep all of your pages within your teams namespace.


Home Team Official Team Profile Project Parts Submitted to the Registry Modeling Notebook Human Practice Safety Acknowledgment

Contents

BLUEPRINT

Our project based a lot on cell cycle, especially the cyclin-promoters and cyclin-degradation tags. Through modelling Cell cycle is one of the most complex network in biology world. Better understanding of cell cycle and it’s regulation, to some extent, faciliate the fermentation industry because we can easily accelarate or decelarate a cell cycle or even one phase in the cycle which are important for metabolism product synthesis. In order to simulation and predict the experimets of the effeciency of Sic1, alternative splicing and degradation tags in the whole cell cycle, we build tree ordinary differential equation system models.

CELL CYCLE

HOW TO BUILD IT

Using the MATLAB we created a framework of the nature cell cycle system (Figure 1). We started at the genetic level, modelling transcription, translation, phosphoralation and the degradation. We also included the rate of transport of the substrate into the cell and the diffusion of the product out of the cell. The degradation reactions for the RNA transcript and the enzyme were also included.

                  • SUPPOSED TO BE THE CIRCUITS******************************

After creating the basic framework for the model we needed to create mathematical equations for each reaction with appropriate rate constants. These equations and the corresponding values are shown below in Tables 1 and 2.

WHAT IT SHOWS

Before running the model we needed to decide what an appropriate endpoint would be. As we were trying to determine how quickly we could get a result we chose 2µM as our endpoint. This was chosen because initial electrochemical testing of PNP showed strong responses at concentrations as low as this. With our endpoint chosen the model was run and the data is shown below in Figure 2.

CELL CYCLE REGULATION

HOW TO BUILD IT

Using the MATLAB we created a framework of the nature cell cycle system (Figure 1). We started at the genetic level, modelling transcription, translation, phosphoralation and the degradation. We also included the rate of transport of the substrate into the cell and the diffusion of the product out of the cell. The degradation reactions for the RNA transcript and the enzyme were also included.

                  • SUPPOSED TO BE THE CIRCUITS******************************

After creating the basic framework for the model we needed to create mathematical equations for each reaction with appropriate rate constants. These equations and the corresponding values are shown below in Tables 1 and 2.

WHAT IT SHOWS

Before running the model we needed to decide what an appropriate endpoint would be. As we were trying to determine how quickly we could get a result we chose 2µM as our endpoint. This was chosen because initial electrochemical testing of PNP showed strong responses at concentrations as low as this. With our endpoint chosen the model was run and the data is shown below in Figure 2.

Alternative Splicing by CRISPRi

HOW TO BUILD IT

Using the MATLAB we created a framework of the nature cell cycle system (Figure 1). We started at the genetic level, modelling transcription, translation, phosphoralation and the degradation. We also included the rate of transport of the substrate into the cell and the diffusion of the product out of the cell. The degradation reactions for the RNA transcript and the enzyme were also included.

                  • SUPPOSED TO BE THE CIRCUITS******************************

After creating the basic framework for the model we needed to create mathematical equations for each reaction with appropriate rate constants. These equations and the corresponding values are shown below.

      • Reaction

Dcase9_sgRNA :

  • d(dCas9_m)/dt = P(dCas9_m) - D (RNA)
  • d(dCas9_P)/dt= dCas9_m *P(dCas9p) - D(dcas9_P) - A1
  • d(sgRNA)/dt = P(sgRNA) - D(RNA) - A1
  • d(sgRNA_dCas9)/dt = A1 - A2
  • d(sgRNA_dCas9_target)/dt = A2 - d

Hub1_Snu66

  • d(Hub1_m)/dt = P(Hub1_m) - D (RNA)
  • d(Hub1_P)/dt= Hub1_m *P(Hub1_p) - D(Hub1_P) - A1 + A2 = Hub1_m * P(Hub1_p) - D(Hub1_P) - A
  • d(Hub1_spliceosome)/dt = A1 - A2 = A
  • d(spliceosome)/dt = - A1 + A2 = -A
  • d(pre-mRNA)/dt = P(pre-mRNA) - D(RNA) - pre-mRNA * k2 * Hub1_spliceosome - pre-mRNA * k1 * spliceosome
  • d(S-mRNA)/dt = pre-mRNA * k * Hub1_spliceosome - D(RNA)
  • d(L-mRNA)/dt = pre-mRNA * k1 * spliceosome
  • d(ProteinL)/dt = pre-mRNA * P(ProteinL) - D(ProteinL)
  • d(ProteinS)/dt = mature-mRNA * P(ProteinS) - D(ProteinS)

“MER1_MER2“

  • d(Mer1_m)/dt = P(Mer1_m) - D (RNA)
  • d(Mer1_P)/dt = Hub1_m * P(Mer1_p) - D(Mer1_P) - A1 + A2 = Hub1_m * P(Mer1_p) - D(Mer1_P) - A
  • d(Mer1_spliceosome)/dt = A1 - A2 = A
  • d(spliceosome)/dt = -A1 + A2 = -A
  • d(ProteinL)/dt = pre-mRNA * P(ProteinL) - D(ProteinL)
  • d(ProteinS)/dt = mature-mRNA * P(ProteinS) - D(ProteinS)

WHAT IT SHOWS

Before running the model we needed to decide what an appropriate endpoint would be. As we were trying to determine how quickly we could get a result we chose 2µM as our endpoint. This was chosen because initial electrochemical testing of PNP showed strong responses at concentrations as low as this. With our endpoint chosen the model was run and the data is shown below in Figure 2.


Degradation Rate

HOW TO BUILD IT

Using the MATLAB we created a framework of the nature cell cycle system (Figure 1). We started at the genetic level, modelling transcription, translation, phosphoralation and the degradation. We also included the rate of transport of the substrate into the cell and the diffusion of the product out of the cell. The degradation reactions for the RNA transcript and the enzyme were also included.

                  • SUPPOSED TO BE THE CIRCUITS******************************

After creating the basic framework for the model we needed to create mathematical equations for each reaction with appropriate rate constants. These equations and the corresponding values are shown below in Tables 1

Table1 parameters Degradation paramete.jpg

WHAT IT SHOWS

Before running the model we needed to decide what an appropriate endpoint would be. As we were trying to determine how quickly we could get a result we chose 2µM as our endpoint. This was chosen because initial electrochemical testing of PNP showed strong responses at concentrations as low as this. With our endpoint chosen the model was run and the data is shown below in Figure 2.