Team:SydneyUni Australia/Project/Results

From 2013.igem.org

Revision as of 03:26, 28 October 2013 by Robbie.oppenheimer (Talk | contribs)

SydneyUniversity Top Banner.jpg SydneyUniversity Bottom Banner.jpg

Project Results

    Early in our project we needed to find a suitable monooxygenase to begin degradation of DCA by one of the two degradation pathways.
  • Toluene-o-xylene monooxygenase (ToMO) from Pseuodomonas stutzeri OX1 has been shown to oxidise xylenes, toluene, benzene, styrene, napthalene (Bertoni et al., 1996) as well as tetrachloroethene, trichloroethene, dichloroethene and vinyl chloride (Shim et al., 2001). The enzyme was optimised for chlorinated ethene degradation (Varder & Wood, 2005), and gifted to our host lab in the plasmid pBS(Kan)ToMO.
  • We showed that ToMO can begin degradation of DCA through an assay for chloride ions released as DCA is converted to chloroacetaldehyde. To our knowledge this hasn’t been shown by anyone else before.
  • This is pretty cool, but during the middle of the year we decided to try synthesising the whole pathway rather than building it by conventional cloning. The length of the ToMO gene cluster meant it was too expensive for us to continue working with it. In place of ToMO we turned to a cytochrome p450 monooxygenase, which had been shown in early 2013 to play the same role as ToMO in the initial step of DCA-degradation (Nishino et al. 2013).
  • E. coli expressing ToMO converts indole to indigo:
    Progress
    • Transformation
      • We spent a week optimising the transformation of our Gibson Assembly reaction product. We initially tried transformation into E. coli EPI300 and yielded no transformants. We suspected that there may be a metabolic burden or harm to cells carrying our correctly assembled product, due to the strong constitutive expression of our designed promoter, Psyn. To account for this we tried transforming into E. coli EPI400, which carries plasmids at low copy-number with an inducible increase in copy-number. We also tried incubating and growing cells at room temperature to lessen their growth rate, so that they might be able to better cope with any possible toxicity of the transformed Gibson Assembly reaction product. Neither of these were successful; however, we were able to screen 87 clones by transforming into a different strain, E. coli TOP10.
    • Screening
      • We screened 87 clones for the presence of dhlB, a gene responsible for the breakdown of chloroacetate in our pathway, by incubating resting cells with chloroacetate and chloride assay. A few clones from each type of pathway looked promising, so we proceeded to extract plasmids from these for further investigation.
      • dhlB PCR screening:
        We expected a band at ~800 bp for an amplification of dhlB, the gene in our pathway responsible for the degradation of chloroacetate. We didn’t see it in any of the 87 clones used in the phenotypic chloride assay, where a few of the clones had exhibited increased production of Cl- ions from the chloroacetate substrate compared to control cells.
    • Plasmid Preps
      • None of the clones from which we extracted plasmids contained the correctly assembled insert. By PCR and diagnostic restriction digests on these plasmids we were able to distinguish two different misassembled versions of our desired Gibson Assembly reaction product.
      • Plasmid Digests
        We did a second plasmid prep of our clones because the first weren’t very clear. Desmond figured out that by digesting the plasmids with EcoRV we ought to see a single 2 kb band if pSB has closed on itself. We don't see anything like this in our clones, but we know from the rfp that this works (pSB-rfp is about 3 kb, and contains a single EcoRV site in the pSB backbone). If the plasmid contains our gBlocks (or at least iGEMBLOCK 1 with aldA), then we expect to see two bands - one at 1 kb, a second at 5 or 6 kb (depending on whether we're looking at p450 or the adh plasmid). We don't see this either. We think that in most of the plasmids, some of the gBlocks have assembled in pSB1C3 but not iGEMBLOCK 1. In one of the clones (64) we see a band at 1 kb but nothing else, so maybe iGEMBLOCK1 assembled in pSB, but not other gBlocks.

        Interestingly, rfp looks spot-on while our results are similar to that in the last plasmid prep (everything slightly higher than 3 kb, except 64). With rfp we expect a single band at 3 kb (pSB is 2 kb plus the rfp 'part' is 1 kb, and the whole construct contains a single EcoRV site in pSB). Notably, 64 was one of the small p450 colonies we patched from Gibson Assembly Product transformations.
    • PCR from Gibson template
      • We thought it could have been possible to assemble our entire pathway from smaller fragments salvaged from our Gibson Assembly reaction product. This proved impossible, presumably due to the extent of heterogenous template including both correctly and incorrectly assembled gBlocks in the Gibson Assembly reaction product. It may have been possible to do something similar using IDT’s gBlocks as template, however, this was not possible as we’d used up all of one of gBlocks during a second Gibson Assembly.
        Ap, Bp, Cp are from the p450 pathway, using our GA reaction product as template. Aa, Ba and Ca are from the adh pathway. It looks like we can’t amplify what we want, or that it doesn’t exist in the GA reaction product.
    Lessons
    • Constitutive Expression
      • We suspect that some of the genes we tried to assemble (e.g., p450, Nishino et al., 2013) can harm the cells they're expressed in, whether this is by using up resources or unusual interactions with undesired targets in the cell. If this is the case, then by a sort of natural screening we were only able to find colonies on plates that contain misassembled gBlocks that did not successfully express these genes.
      • Upon reflection, we approached the assembly of our pathway with an almost child-like ignorance and optimism. Our promoter was specifically designed to maximise expression of our construct, as if ‘the more pollutant degrading genes, the better’. If the hypothesis above is correct, then we might have had more success with an inducible promoter.
    • Modularity
      • Consider the parable of the watchmakers:

        "There once were two watchmakers, named Hora and Tempus, who manufactured very fine watches. Both of them were highly regarded, and the phones in their workshops rang frequently - new customers were constantly calling them. However, Hora prospered, while Tempus became poorer and poorer and finally lost his shop. What was the reason?
        The watches the men made consisted of about 1,000 parts each. Tempus had so constructed his that if he had one partly assembled and had to put it down - to answer the phone say - it immediately fell to pieces and had to be reassembled from the elements. The better the customers liked his watches, the more they phoned him, the more difficult it became for him to find enough uninterrupted time to finish a watch.
        The watches that Hora made were no less complex than those of Tempus. But he had designed them so that he could put together subassemblies of about ten elements each. Ten of these subassemblies, again, could be put together into a larger subassembly; and a system of ten of the latter sub-assemblies constituted the whole watch. Hence, when Hora had to put down a partly assembled watch in order to answer the phone, he lost only a small part of his work, and he assembled his watches in only a fraction of the man-hours it took Tempus."
        (Simon, 1962)

      • The sequences we had synthesised as gBlocks by IDT were designed so that they could only be assembled in the whole DCA-degradation pathway, rather than as parts within pSB1C3 which could then be assembled piece-by-piece. This meant that our success relied on the correct assembly of the entire pathway, and when this failed, that we were unable to access parts of the pathway.
  • Plans
    • Replacement of gBlocks
      • By replacing a single gBlock, it might be possible to find correctly assembled Gibson products by substituting our strong constitutive promoter Psyn with a repressible promoter.
      • With four new gBlocks, it might be possible to assemble some of the important genes in our pathway (aldA, p450, adh1b1) in a BioBrick vector, so that they could then be subsequently assembled piecewise.
    • PCR Assembly
      • It might be possible to PCR amplify genes directly from our gBlocks as template rather than our Gibson Assembly reaction product. Alternatively, with the design of new primers, the genes of interest might be amplified from gBlocks for cloning into a BioBrick vector. With either of these options, sequence fidelity may be an issue.
  • While struggling with Gibson Assembly of our whole pathway we turned to the extraction, cloning and characterisation of two parts in our pathway, dhlB and dhlA. These two genes had been cloned into pUC19 by others in our lab.
    • Amplification
      • We designed primers specifically for amplifying dhlB and dhlA, while removing a forbidden EcoRI site between them. Our primer design allowed us to clone each gene by itself and also together into the shipping vector pSB1C3.
      • We successfully amplified dhlB and dhlA from pUC19.
    • Cloning
      • We cloned the PCR fragments into pSB1C3 and transformed the ligation product. We were greatly assisted by ligating into a BBa_J04450, extracted from the linearised plasmid pSB1C3 in the Distribution Kit, which provided a neat red-white screen.
        PCR Junction Screening of AB22 We used the red-white screen to find colonies that contained the dhlB-dhlA insert instead of rfp, and PCR junction screen was used to find correctly assembled inserts. We used NEB 1 kb ladder. If the two-way ligation of dhlB and dhlA worked as desired, we should have observed a 110 bp PCR product (AB22s) spanning the junction between pSB1C3 and dhlB, an 874bp PCR product (AB22m) spanning the junction between dhlB and dhlA, and a 1086bp PCR product (AB22e) spanning the junction between dhlA and pSB1C3.


      • After PCR screening of the junctions between our parts and pSB1C3, we extracted the plasmids from a few that looked promising for further confirmation and submission to the iGEM HQ.
      • This digest confirmed the length and concentration of our plasmids before shipping to iGEM HQ.
  • After sending dhlB and dhlA to iGEM HQ, we began characterisation by cloning a constitutive promoter (BBa_I14033) from the Distribution Kit in front of our parts.
  • Amplification
    • PCat (BBa_I14033) is 38bp, but with our primers produced a 280 bp fragment, 4th well from left.
    • Gel Electrophoresis demonstrating PCat Amplification:
      1.0% agarose gel of PCR products from Distribution Kit: the gel loading order was 1 kb ladder, LacI generator PCR product (BBa_P0412 template), 100 bp ladder, PCat (BBa_I14033 template) and PLac. The band for PCat is 280 bp; this indicates the presense of PCat with the ends of pSB1C: 38 bp + 250 bp ≈ 280 bp.
    • The PCat PCR products were combined and purified using the QiaQuick Kit. As we were attempting to construct an inducible system with PCat constitutively promoting the LacI generator and we had multiple LacI PCR products, we attempted a gel band extraction of the correct band but were unsuccessful.

    • Having lost our repressor part, we decided to construct two constitutively expressed systems using Pcat BBa_K1115009 and Ptet BBa_K1115010. After PCR amplification, we digested these promoters with EcoRI and SpeI, and our dhlB-dhlA part BBa_K1115008 with EcoRI and XbaI, and the ligated fragments were transformed to chemically competent TOP10 cells.

    • Ptet (BBa_R0040) is ~50 bp, but with our primers produced fragment ~300 bp, 1st well from left.
    • The Gel demonstrating Ptet Amplification:
  • Phenotypic Assays
    • After cloning into a plasmid containing dhlB and dhlA, we screened for clones expressing our construct. We made screening plates that allowed us to pick clones that looked like they were successfully expressing one of our genes of interest. Yellow regions have low pH, indicating the local degradation of chloroacetate in the growth media. This tells us which clones were successfully cloned with the promoter PCat, facilitating expression of the chloroacetate-degrading enzyme dhlB.
    • Screening plates that allowed us to isolate clones
  • Characterisation of submitted parts with the constitutive promoter PCat
    • To characterize our dhlA and dhlB parts, we again used our colorimetric chloride assay to measure chloride release when cells containing our plasmids were incubated in chloroacetate (blue) or DCA (red) for 16 h. Data for each condition is in triplicate. The negative control was BBa_K1115008, the promoterless dhlB-dhlA coding region. BBa_K1115009 is dhlB-dhlA constitutively expressed by PCat (BBa_I14033), BBa_K1115010 is dhlB-dhlA constitutively expressed by PTet (BBa_R0040), and the positive control is the Coleman lab pUC19 house plasmid expressing dhlB-dhlA with the same RBS.).


      The data from the graph above is summarized to the right, showing total chloride release relative to initial substrate concentration. The calculations are summarized below.
    • Estimated percentage degradation of chloroacetate and 1,2-DCA was determined by:



      where the test cell supernatant is from BBa_K1115009 or BBa_K1115010, the negative cell supernatant is from BBa_K1115008, and the substrate concentration is 2 mM chloroacetate or 1,2-DCA. Note that values of over 100% degradation are misleading and likely indicate endogenous Cl- production (i.e. Cl- production from other cellular processes unrelated to target substrate metabolism.
    ToMO degrades DCA
  • Bertoni, G., Bolognese, F., Galli, E., & Barbieri, P. (1996). Cloning of the genes for and characterization of the early stages of toluene and o-xylene catabolism in Pseudomonas stutzeri OX1. Applied and Environmental Microbiology, 62(10), 3704-3711.
  • Shim, H., Ryoo, D., Barbieri, P., & Wood, T. (2001). Aerobic degradation of mixtures of tetrachloroethylene, trichloroethylene, dichloroethylenes, and vinyl chloride by toluene-o-xylene monooxygenase of Pseudomonas stutzeri OX1. Applied Microbiology and Biotechnology, 56(1-2), 265-269.
  • Vardar, G., & Wood, T. K. (2005). Protein engineering of toluene-o-xylene monooxygenase from Pseudomonas stutzeri OX1 for enhanced chlorinated ethene degradation and o-xylene oxidation. Applied Microbiology and Biotechnology, 68(4), 510-517.
  • Nishino, S. F., Shin, K. A., Gossett, J. M., & Spain, J. C. (2013). Cytochrome P450 Initiates Degradation of cis-Dichloroethene by Polaromonas sp. strain JS666. Applied and environmental microbiology, 79(7), 2263-2272.

  • Gibson Assembly
  • Simon, H. A. (1962) The architecture of complexity. Proceedings of the American Philosophical Society , 106(6), 467-482.


With thanks to: