Team:DTU-Denmark/Methods/Bioreactor

From 2013.igem.org

(Difference between revisions)
(→Bioreactor)
(→Procedure)
Line 4: Line 4:
== Procedure ==
== Procedure ==
-
# Put carefully one long needle in the vessel for injecting N<sub>2</sub>
+
In this anaerobic experiment we add nitrite in our cultures with the Nir transformed cells, in order to test how nitrite is converted to nitrous oxide.
-
# Put one short needle in the vessel for removing the containing oxygen
+
 
-
# Open the pressure valve of the Nitrogen gas container
+
# Make an overnight culture with the Nir transformation cells and then pour 100 ml in each of the 3 replicates of 800 ml DM minimal medium with ammonium chloride.  
-
# Turn round (anticlockwise) the nitrogen valve to open it until there is a flow of gas.
+
# Set the bio-reactor at 37<sub>o</sub>C.
-
# Sparge with N<sub>2</sub> by connecting the N<sub>2</sub> gas tube with the long needle.  
+
# Add 8 ml of 50mM of nitrite stock solution to each of the vessels.
-
# After 3/ 5 min remove first the small needle and after 2 seconds the long needle.
+
# Take 100 mL as the first sample t=0 for both colorimetric analysis and nitrous oxide measurement, from each of the 3 vessels.
-
# Turn off the nitrogen valve.  
+
# After 10 hours take another 100 ml of sample to measure nitrous oxide and make the colorimetric analysis, from each of the 3 vessels.
-
# Turn off the pressure valve.
+
 
 +
#To finish gathering data, make the colorimetric measurements for nitrite and ammonium for each of the samples collected by using the protocols
 +
[[Team:DTU-Denmark/Methods/Nitrite colorimetric measurements|Nitrite colorimetric measurements]] and [[Team:DTU-Denmark/Methods/Ammonium colorimetric measurements|Ammonium colorimetric measurements]], respectively.
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
<div style="clear: both;"></div>
<div style="clear: both;"></div>
</div>
</div>
{{:Team:DTU-Denmark/Templates/EndPage}}
{{:Team:DTU-Denmark/Templates/EndPage}}

Revision as of 13:21, 1 October 2013

Bioreactor

Procedure

In this anaerobic experiment we add nitrite in our cultures with the Nir transformed cells, in order to test how nitrite is converted to nitrous oxide.

  1. Make an overnight culture with the Nir transformation cells and then pour 100 ml in each of the 3 replicates of 800 ml DM minimal medium with ammonium chloride.
  2. Set the bio-reactor at 37oC.
  3. Add 8 ml of 50mM of nitrite stock solution to each of the vessels.
  4. Take 100 mL as the first sample t=0 for both colorimetric analysis and nitrous oxide measurement, from each of the 3 vessels.
  5. After 10 hours take another 100 ml of sample to measure nitrous oxide and make the colorimetric analysis, from each of the 3 vessels.
  1. To finish gathering data, make the colorimetric measurements for nitrite and ammonium for each of the samples collected by using the protocols

Nitrite colorimetric measurements and Ammonium colorimetric measurements, respectively.






Retrieved from "http://2013.igem.org/Team:DTU-Denmark/Methods/Bioreactor"