"

From 2013.igem.org

---

Revision as of 00:36, 5 October 2013

Contents 1 pRB15-18 2 Screening delC 3 Screening pKH4 4 Assembly of pKH4-derivates 5 Amplification of svp 6 Amplification of indC-fragments 7 Minipreps 8 Cotransformation 9 Restriction cloning for pRB15-19 10 Reevaluation of old MP pRB15-18, pRB21 11 T-domain exchange with different domain borders 12 Screenings

pRB15-18

The first mini

Screening delC

Table 15.x Screening pRB18

Template	Primer	Comment
TOP10+pSB3K3	RB64/VR	negative control
	VF2/65
TOP10+pRB18	RB64/VR	screening
	VF2/65
	VF2/VR
delC PCR product	RB64/RB65	positive control

20130902 screening

Screening pKH4

Table 15.x Screening pKH4

Template	Primer
TOP10+pKH4	KH52/VR
	VF2/RB71

20130902 screening

A miniprep of probe 4 was sent to sequencing, which was positive.

Assembly of pKH4-derivates

pKH4 is used for assembly of pKH5 and variants of pKH4 with all the different T-Domains.

Table 15.x Amplification KH3/4 from pKH4

KH3/4 in BioRAD T100
cycles	temperature [°C]	time [s]
1	98	10
10	98	1
	td 62	5
	72	2.00
25	98	1
	57	5
	72	2.00
1	72	6.00
1	12	-

20130902

KH3/4-PCRs were unsuccessful, so we did a gradient PCR

Table 15.x Amplification KH3/4 from pKH4

KH3/4 in biometra
cycles	temperature [°C]	time [s]
1	98	10
10	98	1
	58-59-60-61-62-63	5
	72	2.00
1	72	6.00
1	12	-

20130903 KH3-4 gradient.png

We run the same protocol for 3x 50 ul.

20130903 KH3-4.png

nothing

16 x 10 ul with Q5 and Tm calculator suggested parameters (63 °C annealing), pRB19 ligation as template

20130903 KH3-4 16x 10

We tried NEB Phusion HF with 61 °C annealing temperature in a 10-, 20- and 50 ul reaction from pRB19 ligation and in a 20 ul reaction from pKH4 ind T100 (left). As well we ran with Phusion HF (59 °C annealing) in 20 ul reactions with 0, 1 and 2 ul DMSO (Biorad Cycler 2)

For further evaluation of the single plasmid strategy we admired a plasmid with bpsA instead of indC as indigoidine synthetase. For a quick shot we wanted to use pKH4 and pRB7 for a restriction approach with the enzymes KpnI and BamHI.

• prepare digestion (20 µl), 37 °C, ~0.5 h:
  • pKH4: 2 µl NEBuffer CutSmart, 4 µl pKH4, 13 µl H2O, 0.5 µl (KpnI, BamHI)
  • pRB7: 2 µl NEBuffer CutSmart, 2.3 µl pRB7, 14.7 µl H2O, 0.5 µl (KpnI, BamHI)

20130905-D-pKH4 pRB7.png Digestion of pKH4 (KpnI, BamHI) and pRB7 (KpnI, BamHI). Desired bands for insert of ~3.8 kbp and backbone+sfp of ~3.9 kbp were expected. 100 V, 0.8 % Agarose, TAE

The restriction for pKH4 did not work correctly due to the fact that with assembly of pKH4 the BamHI cutting site was removed and the plasmid was only linearized by the KpnI cutting site. For pRB7 two bands at almost equal site can be expected and thereby the digestion approach can not be used in this manner. We will try again with a similar approach like for the assembly of pKH4 as here a nonsense sequence instead of the PPtases will be introduced into pRB7.

• preparation of pRB7 MP by retransformation of TOP10 (as no glycerol stock is available).

Amplification of svp

The svp fragment we used so far was wrong, so we try to amplify it again from the genome, using various primers:

• RB13/14
• RB15/16
• RB29/30
• RB39/40

Gradient on biometra cycler (72 °C, 65 °C, 58 °C)

20130902 screening

svp was always right; only after assembly it turned wrong. We will try to bring it in using restriction cloning and to sequence it; maybe the screening is just inconclusive.

Amplification of indC-fragments

indC fragments are amplified from Plum genome and indC short PCR product in a 50 ul Phusioin HF reaction. The fragments are:

• RB27/69
• RB70/71
• RB68/46
• RB68/KH4
• KH5/RB46
• RB27/46 from pRB14
• RB27/28

Table 14.x PCR indC(ccdB) for pRB19

RB27/69 in BioRAD T100 from indC short
RB27/69 in BioRAD T100 from P. luminescens pellet
RB70/71 in BioRAD T100 from indC short
RB70/71 in BioRAD T100 from P. luminescens pellet
KH5/RB46 in BioRAD T100 from indC short
KH5/RB46 in BioRAD T100 from P. luminescens pellet
cycles	temperature [°C]	time [s]
1	98	2.00
35	98	5
	55	15
	72	30
1	72	2.00
1	12	-
RB68/46 in BioRAD T100 from indC short
RB68/46 in BioRAD T100 from P. luminescens pellet
RB68/KH4 in BioRAD T100 from indC short
RB68/KH4 in BioRAD T100 from P. luminescens pellet
cycles	temperature [°C]	time [s]
1	98	2.00
30	98	15
	55	15
	72	2.00
1	72	5.00
1	12	-

20130902 indC-fragments.png

20130902 indC-fragments cut.png

Fragment RB70/71 is wrong because RB71 is wrong. We repeated the amplification with RB78 instead of RB71.

20130902 70-78.png

20130902 70-78 cut.png

Fragment KH3/RB46 is very weak, so we try to improve this reaction as well.

Table 15.x Amplification indC RB21/46 from pRB14 and pSB1C3 RB21/22 from miniprep

KH3/RB46 in BioRAD T100
cycles	temperature [°C]	time [s]
1	98	10
12	98	1
	td 60	5
	72	20
23	98	1
	63	5
	72	20
1	72	60
1	12	-

And reaction RB68/RB46 with the same protocol but 60 s elongation time.

We try KH3/RB79 with improved conditions.

20130903 RB79-fragments.png

20130903 RB79-fragments cut.png

We tried to get this fragment with KH9/RB79 with Q5 in biometra cycler (60 °C annealing)

20130904 21-22 9-79.png

We tried to get this fragment with KH9/RB79 with Phusion HF in biometra old cycler (61 °C annealing)

Gel Extraction yielded xx ng/ ul

CPEC assemblies were performed for following plasmids with the respective fragments:

• pRB19: RB27/79 from pRB14 and RB21/22 from pSB1C3 midiprep
• pRB22: RB27/69 RB70/78 RB68/79 RB21/22
• pRB23: RB27/69 RB70/78 RB68/KH4 KH9/RB79 (pRB14) RB21/22
• pRB24: RB27/28 RB66/67 RB21/22
• pKH5: KH3/4 (pKH4) KH9/10

Transformed cells looked as follows:

201309 CPECs

Colony screenings

201309 CPECs screening

pRB23 assembly was unsuccessful, pRB22 is correct (plates turn blue), pRB24 seems to be correct (small deep blue colonies), pRB19 didn't work, pKH5 seems correct. We prepped the marked colonies. Sequencing showed that pRB22 is correct and doesn't carry endogenous RFC10 cutting sites any longer. Test digestion with EcoRI and SpeI also enforced this result.

We performed a PCR with Phusion HF and KH3/4 from pRB22, assembled it in a CPEC approach with ccdB KH9/10 and transformed OneShot cells.

Colony screenings and test-transformation in TOP10 cells showed that the assembly was successful and that we're able to shuffle the T-domains.

Minipreps

Minipreps of pRB15, pRB17, pRB18, pKH4 and pRB14 yielded:

• pRB15
• pRB17
• pRB18
• pRB14: 284.8 ng/ ul in 20 ul
• pKH4: 316.8 ng/ ul in 20 ul

5 ul of each pRB15, 17 and 18 were put on an agarose gel with small pockets.

20130902 indC

PPTase plasmid minipreps are empty. We will try to assemble them again using a restriction strategy besides prepping them again. Repetitioin of the miniprep was successful and the plasmids were sent to sequencing.

Cotransformation

We did cotransformation of pKH4 with pRB15-18, respectively, and single transformation of pSB3K3, pKH4 and pRB15-18.

Restriction cloning for pRB15-19

Table 15.x Amplification indC RB21/46 from pRB14 and pSB1C3 RB21/22 from miniprep

RB21/22 in BioRAD T100
cycles	temperature [°C]	time [s]
1	98	10
12	98	1
	td 60	5
	72	50
23	98	1
	65	5
	72	40
1	72	3.00
1	12	-
RB27/46 in BioRAD T100
cycles	temperature [°C]	time [s]
1	98	10
12	98	1
	td 60	5
	72	70
18	98	1
	65	5
	72	60
1	72	2.00
1	12	-

20130902 indC res

20130902 indC res

svp was reamplified from short product

Table 15.x Amplification indC RB21/46 from pRB14 and pSB1C3 RB21/22 from miniprep

RB21/22 in BioRAD T100
cycles	temperature [°C]	time [s]
1	98	10
35	98	1
	65	5
	72	20
1	72	60
1	12	-

20130902 svplong

20130902 svplong

indC and pSB1C3 were digested with KpnI and NheI, sfp, svp, entD, delC and pSB3K3 with BamHI and NheI for two hours at 37 °C.

20130903 digest

20130903 digest cut

Unfortunately pSB3K3 contains an internal NheI cutting site. We repeated the amplification, purification, restriction digest and purification with BamHI and SpeI, which builds a scar with NheI.

20130903 pSB3K3

20130903 pSB3K3 cut

Ligation of pSB1C3 with indC(ccdB) was performed over night in a 10 ul reaction with 4 ul fragments each.

Transformation of ligation mixes were performed with 5 µl each in TOP10. Additionally 5 µl of ligation mix of pRB19 was transformed into OneShot cells.

20130905 plates pRB15-18-ligation

20130905 plates pRB19-ligation

Colony screenings showed following results:

We prepped pRB15, 17 and 18 and repeated the assembly of pRB16 from scratch. Therefore we used RB13/14 for amplification of svp from an S. verticilllus ATCC15003 liquid culture. Afterwards we reamplified this PCR gel extraction with RB29/30 and performed a restriction digest with BamHI and NheI to ligate the fragment with pSB3K3 (BamHI; SpeI).

Reevaluation of old MP pRB15-18, pRB21

Because we could observe small colonies with darkgray center on cotransformed pRB21 with all PPtases constructs (plates of 2013-08-27), we conducted a colony screen and a retransformation with 1 µl of previous MP of pRB15.2 (Konrad) and pRB16-18 (Ralf) and pRB21 (Ralf). Additionally a cotransformation with this old pRB21 MP with the old pRB15.2 as well with 2.5 µl of newly assembled pRB15 was performed.

20130905 plates pRB15-18 pRB21

20130905 plates CT pRB15-pRB21

The colony screening was performed using the primers VR and KH5. If the gray colonies carry two plasmids with indigoidine synthetase and activating PPtase separately an amplicon of size ~1.3 kbp. Otherwise if for some reason the PPtase and indigoidine synthetase are still on one plasmid, we could expect an amplicon of 2.1 kbp.

Table 15.x colony screening cotrafo pRB21 and pRB15-18, 2013-08-27

KH5/VR in Biometra, 10 µl
cycles	temperature [°C]	time [s]
1	95	120
30	95	30
	60	30
	72	120
1	72	240
1	12	-

20130905-CPCR cotrafo pRB15-18 pRB21.png Colony PCR of cotransformation pRB21 and pRB15-18. Desired bands would be expected at 1.3 kbp for positive clones. For positive controls amplicons were expected at ~2 kbp for pRB3 and at ~1.5 kbp for pKH4. 100 V, 0.8 % Agarose, TAE

The positive controls gave the expected bands. All picked clones also gave an expected band at 1.3 kbp which leads to the conclusion that they carry the indC-only plasmid pRB21. Because every third clone was a picked white colony we could also conclude, that not all transformants carry an intact PPtase plasmid.

T-domain exchange with different domain borders

We thought of a different way to set the T-Domain borders. Starting from the Pfam-predicted domain borders we made pairwise alignments to find amino acid sequences up- and downstream the predicted borders, that are identical in both the native and the brought in sequence. In the case of the exchange of indC and bpsA those new borders would be around 10 amino acids more on each side. We designed primers for this strategy.

Screenings

Table 15.x Screening of new constructs

Plasmid	Primer 1	Primer 2	Expected product [bp]	wrong product [bp]	additional test
pKH6	VR	RB17	1070
pKH7	VR	RB13	1120
pKH8	VR	RB41	1000
pKH9	VR	RB64	1070
pRB15_lig	VR	RB17	1070
pRB16_lig	VR	RB13	1120
pRB17_lig	VR	RB41	1000
pRB18_lig	VR	RB64	1070
pRB19_lig	VR	KH9	1900	2600
	VR	RB17	-	1070
pRB22_frag					digest
pRB23_frag	VR	KH9	1900		digest
	RB27	KH4	2900
pKH5	VR	KH9	2100
pRB24	VR	KH5	2600
	VR	RB64	1070
pRB7	-	-	-	-	digest

We repeated the screening of pKH8 with 20 colonies and amplified svp with RB29/30 from pKH7.