Team:Paris Bettencourt/Notebook/Phage Sensor/Tuesday 24th September.html

Detect

ASDF

Tuesday 24^th September

Overlap PCR, PCR of Overlap, Digestion, Gel extraction, Gels, PCR Purification, PCR (SPCR2, SPCR3, SPCR5, SPCR6, SPCR7, SPCR8, SPCR9, SPCR10, SPCR11, linearize pSB1C3) and liquid culture

Overlap PCR
SPCR5-SPCR2

Reagent	Volume
	x1
Nuclease-free water	37.25 µl
5x Phusion HF Buffer	10 µl
10 mM dNTPs	1 µl
Template Plasmid(10 uM)	1 µl
Template Plasmid (10 uM)	1 µl
Phusion DNA Polymerase	0.5 µl
Total Volume	50 µl

PCR of Overlap

Digestion
M13 (EcoRI, PstI), pSB1C3 (EcoRI, PstI), psB1C3 (XbaI, SpeI)

Reagent	Volume
Purified Plasmid	20 µl
H2O	63 µl
10x FastDigest Buffer	10 µl
FastDigest Enzyme 1	2.5 µl
FastDigest Enzyme 2	2.5 µl
FastAP Phosphatase	2 µl
Total Volume	100 µl

SPCR2 (EcoRI, PstI), SPCR5 (XbaI, SpeI)

Reagent	Volume
Purified PCR Product	16 µl
H2O	0 µl
10x FastDigest Buffer	2 µl
FastDigest Enzyme 1	1 µl
FastDigest Enzyme 2	1 µl
Total Volume	20 µl

Gel
pSB1C3
1%, 100V, 1h
Picture: 13/09/24_pSB1C3 digest_EcoRI/PstI_XbaI/SpeI


extraction
Excise the DNA fragment from the agarose gel with a clean, sharp scalpel. Minimize the size of the gel slice by removing extra agarose.
Weigh the gel slice in a colorless tube. Add 3 volumes of Buffer QG to 1 volume of gel (100 mg ~ 100 μl). To help dissolve gel, mix by vortexing the tube every 2–3 min during the incubation.
After the gel slice has dissolved completely, check that the color of the mixture is yellow (similar to Buffer QG without dissolved agarose).
Add 1 gel volume of isopropanol to the sample and mix (actually only needed for very small products or very big products) To bind DNA, apply the sample to the QIAquick column, and centrifuge for 1 min.
Discard flow-through and place QIAquick column back in the same collection tube.
To wash, add 0.75 ml of Buffer PE to QIAquick column and centrifuge for 1 min.
11. Discard the flow-through and centrifuge the QIAquick column for an additional 1 min at 17,900 x g (13,000 rpm).
12. Place QIAquick column into a clean 1.5 ml microcentrifuge tube.
To elute DNA, add 30 μl elution buffer to the center of the QIAquick membrane, let the column stand for 1 min, and then centrifuge for 1 min.

Gel
PCR Overlap
1%, 100V, 1h
Picture: 13/09/24_Overlap PCR PCR SCPR5_SPCR2

PCR Purification (M13 (EcoRI, PstI), SPCR2 (EcoRI, PstI), SPCR5 (XbaI, SpeI))
Add 5 volumes of Buffer PB to 1 volume of the PCR sample and mix.
To bind DNA, apply the sample to the QIAquick column and centrifuge for 30–60 s.
Discard flow-through. Place the QIAquick column back into the same tube
To wash, add 0.75 ml Buffer PE to the QIAquick column and centrifuge for 30–60 s.
Discard flow-through and place the QIAquick column back in the same tube.
Centrifuge the column for an additional 1 min.
Place QIAquick column in a clean 1.5 ml microcentrifuge tube.
To elute DNA, add 50 μl Buffer EB to the center of the QIAquick membrane and centrifuge the column for 1 min.

PCR (SPCR2, SPCR3, SPCR5, SPCR6, SPCR7, SPCR8, SPCR9, SPCR10, SPCR11, linearize pSB1C3)
each 8x

Reagent	Volume
	1x
Nuclease-free water	37.25 µl
5x Phusion HF Buffer	10 µl
10 mM dNTPs	1 µl
Forward Primer (10 uM)	0.5 µl
Reverse Primer (10 uM)	0.5 µl
Template Plasmid	0.25 µl
Phusion DNA Polymerase	0.5 µl
Total Volume	50 µl

Thermocycler Protocol: Fermentas Phusion
	Temp	Time
Start	98°C	30 sec	Melt
Cycle 1	98°C	5 sec	Melt	35 cycles
Cycle 2		25 sec	Anneal
Cycle 3	72°C	30 sec per kb	Extend
Finish	72 °C	5 min	Extand
Store	10°C	Forever	Store

Liquid culture
NEB, sSP004, Fr-433