"
Phage Purification
From 2013.igem.org
Contents |
March
3/15/13
Today we began researching for a procedure to begin purifying phage. We have found that T7 can self assemble with scaffolding proteins without forming procapsids, and that T4 has only been know to form procapsids. We may not have to worry about T4 if the other group isn't using it.
Important findings - Phage have been purified before Phage capsids can self assemble Phage (amber strain) can have their genes knocked out to make a hollow phage
3/18/13
Priorities List: Find out how to put drugs into the capsid Possibly contact F.W. Studier for his amber t7 phage strain Next class we plan on growing up phage so that we will have a decent amount of phage to work with. We have several procedures that we plan on testing so that we can see if we can purify the protein capsid. We hope to be proceeding with these as soon as we have phage that we can use. Another issue that we need to consider is how to get drugs into the capsid. We need to be able to test and see if we can actually fill our empty capsids with a material. We have several procedures found in other papers that could possibly help us with this.
3/20/13
AC
I spent time trying to find a good procedure to propagate phage in a liquid medium. I finally found one that I think will work well for us.
Today we learned a procedure for how to count phage. We performed a phage titer on the T4 phage to see if we have a high enough concentration to work with. This is the general procedure: Phage titer: reported in Pfu/mL (Pfu stands for plaque forming unit) mix E. coli (500 microL) with 50 microL of phage lysate incubate for 20 minutes mix with 4 mL top agar and then plate holes will appear in the agar that are called plaques
How we followed it: We filled five test tubes full of 90 microliters of Liquid Broth each. We added 10 microliters of our desired phage to the first test tube and then mixed We took 10 microliters of the first tubes mixed solution and added it to tube 2, and followed the same procedure for each test tube down the line to tube five. We then labeled 6 culture tubes 0 to -5. In the first culture tube, we added 20 microL phage to .5 mL bacteria. In tubes -1 to -5 we took 20 microL from eppendorfs and added to .5 mL bacteria. We then allowed a 20 minute waiting period for the virus to infect the E. coli. Then, 5 mL top agar was added to each culture tube. Each tube was then plated and incubated at 37 degrees C.
Amber - T2 Arick - T5 Darren - T3
DL We ran into several problems while doing the titer. After we had completed the titer, we found out that the pipet tips we had used were contaminated. When preparing the top agar, we had to melt it in the microwave which caused it to boil over. This could have caused some contamination. While filling my -5 plate with top agar, there was only enough to put in 4mL of agar instead of the 5mL that was called for in our procedure.
RESULTS: 3/22 None of the plates had any phage. There was just a lawn of bacteria growing. This could either be because of the problems mentioned above or because the source of T3 was bad. Seeing as nobody else was able to grow any phage we believe that the source was old.
3/22/13
AC 3/22
We had several sources of error in our procedure. First off there was contamination that affected our results. The micropipette tips that we used had not been autoclaved. This caused contamination to several plates. We also microwaved the augar instead of using a heat bath. This caused there to be tons of condensation in the plates and the augar to crack. We didn’t have any plates that had phage present.
Results: Despite the sources of error, it was pretty clear that the phage did not react with the bacteria. This was either because the phage was not viable, or because of the contamination.
AB 3/22/2013
None of the plates showed phage. A big problem that we had was contamination, but our agar was also crystal looking and cracked in several places. sources of contamination were accidental use of unautoclaved pipettte tips, and the agar was microwaved and exploded, causing water condensed in the microwave to fall into the agar. Results: No phage, lots of contamination. We may need a new source of phage, or just better lab technique.
Next step: find procedures for purifying different phage. Become experts on phage structure. possibly help with designing point mutations.
- osmotic procedure
- procedure from Dr. Grose
Phage structure: T7 has proteins 10 A and 10 B for capsid, and an assembly protein T4 has SOC and HOC proteins
DL 3/22
We are currently waiting for our phage to come in so that we can begin running tests to purify the capsid. We have several procedures in mind. We need to prepare the reagents so that when the virus comes in we can immediately begin attempting to purify it. Most of the procedures we have found apply specifically to T7 but we will also try them on T4. We will continue to look for other procedures that may apply specifically to T4.
3/25/13
AB 3/25/2013
Come up with a list of needed reagents for phage purification, so that when phage arrive we can begin testing procedure effectiveness for phage purification. Our findings may also be useful for the cholera group, since they also need phage to disrupt biofilms/kill cholera. List of materials for Phage Purification Procedure from Dr. Grose
1. Phage suspension buffer also called TM buffer (Tris-Mg2+ Buffer) 10 mM Tris–HCl (pH 7.2–7.5), 100 mM NaCl, 10 mM MgCl2. Addition of 1–10 mM CaCl2 in the suspension buffer may be required for the stability of some phages.
2. DNase I and RNase A from Bovine Pancreas (Roche or Cal- biochem). Stock solutions 1 mg/mL are stored at −20 ◦C.
3. Chloroform.
4. Sodium chloride powder: NaCl ≥ 99. 5 % for molecular biology.
5. Polyethylene glycol powder: PEG 6,000 (MW 5,000–7,000 g/mol) for molecular biology and biochemicalpurposes.
6. Cesium chloride: CsCl ≥ 99. 9 % for density gradient purification.
7. Ultracentrifuge equipments: Beckman L8-55M or equiva- lent.
8. Swinging-bucket rotors (Beckman): SW41 or SW28 and SW50 or SW65.
9. Centrifuge tubes (Beckman): thinwall or thickwall open-top polyallomer tubes:
- 13.2 mL, 14 mm × 89 mm for the SW41 rotor.
- 38.5 mL, 25 mm × 89 mm for the SW28 rotor.
- 5.0 mL, 13 mm × 51 mm for the SW50 or SW65 rotors.
10. Syringes and 18–22 gauge hypodermic needles.
11. Dialysis tubing: Spectra/Por molecular-porous membranetubing, MWCO 12–14,000.
12. Refractometer (optional).
Another Procedure to use: https://cpt.tamu.edu/wp-content/uploads/2011/12/CsCl-phage-prep-08-17-2011.pdf I think it uses the same materials as above, but the procedure is really easy to follow. Procedure for the self assembly of T13 phage - not sure if we'll need this https://cpt.tamu.edu/wp-content/uploads/2011/12/CsCl-phage-prep-08-17-2011.pdf Next, need to figure out what we are going to do with our purified phage - cleave tails? mutate for cholera group?
AC 03/25/2013
Plan of attack for the week: We will be coming up with a list of reagents needed for the purification of proteins. We are still waiting for purified phage to start propagating them and purifying them. In the meantime we are still reading papers on capsid structure and design as well as applications of capsids in nanotechnology. We have found some interesting articles on capsid batteries and drug epitopes. Articles are on the learningsuite website.
DL 3/25
What we need to do this week: Get a list of reagents, make sure we have the procedures down.
Osmotic shock materials: phage, 3M Na2SO4, 2.8M MgSO4, DNAse, centrifuge that can control temperature at 10 degrees C, saline
1. 2.9 ml. of the above phage + 6 ml. 3M Na2SO4 for 2 min., then + 140 ml. cold water rapidly with agitation Residual infectivity by plaque count was 5 X 108/ml.
2. Number 1 + 0.15 ml. saturated MgSO4 (2.8M) + 0.15 mg. DNAse left at 5°C. overnight
3. Number 2 centrifuged at 3500 for one half hr.; supernatant
4. Number 3 centrifuged at 100,000 X g for 1 hr. in a Spinco refrigerated centrifuge at 10°C.
5. Supernatant from number 4
6. Residue from number 4 dissolved in cold saline
7. Number 6 centrifuged at 2,000 for 15 min.; supenatant
8. Number 7 centrifuged at 18,000 × g in a Servall SS-2 for 1 hr.
9. Supernatant from number 8.
10. Residue from number 8 dissolved in saline
3/27/13
AC 3/27/2013
Found a great article on the structure and proteins of bacteriophage T4 http://www.farisaka.bio.titech.ac.jp/text/CMLS-Leiman-20031.pdf The paper goes into detail on the morphogenesis of the capsid head, tail, and LTF. I will be using this paper for the bulk of my presentation on Monday. The main proteins of my focus will be:
- GP-23
- 160 hexamers
- GP-24
- 11 pentamers
- GP-20
- dodecamer portal vertex
- GP-SOC & GP-HOC
- increased vitality
- T = 13 & Q = 21
DL 3/27
Capsid formation can follow several different pathways. This first is which proteins come together by single bonds, gradually forming the different parts that make up the capsid. In the second pathway, different parts are formed and then come together making multiple bonds at one time.
T4 structure http://link.springer.com/content/pdf/10.1007%2Fs00018-003-3072-1 shell has icosohedral ends and a cylindrical equatorial midsection that has a unique portal vertex where the tail attaches
head has gp hoc and gp soc attached to the outside of it gp soc helps maintain head integrity in extreme environments but neither gp hoc or gp soc are required head and midsection are formed by the gene product (gp)23
AB 3/27/2013
How they use T7 in medicine - kit from Novagen - http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3499470/ Bacteriophage T7 has six tail fibers that attatch to E.coli. These fibers are homotrimers (composed of three identical units of polypeptide) of gene 17. These kinked fibers attach to the LPS on E.coli.
Replication: The bacteriophage T7 replisome is an ideal model system for studying replication dynamics because it recapitulates the key features of more complicated systems, yet can be reconstituted in vitro with only four proteins. DNA synthesis is carried out by a stable, one-to-one complex of gene 5 protein (gp5) and thioredoxin, a processivity factor produced by the E. coli host. Gene 4 protein (gp4) contains both helicase and primase domains whereas gene 2.5 protein (gp2.5) is the single-stranded DNA binding protein (15).
Head made of 415 copies of 10B protein
Large-scale Amplification and Purification of T7 Phage Nanoparticles
The T7-p66, T7-p66x2 and T7-wt nanoparticles were propagated in the log phase culture of E. coli BL21 (OD600~0.8) grown in M9-LB broth (LB broth supplemented with 50 ml 20X M9 salts, 20 ml 20% glucose and 1 ml of 1 M MgSO4 per liter) at a multiplicity of infection (MOI) of 0.001 and incubated at 37°C until complete lysis of the culture (3–6 hours). Thirty minutes before removing the culture from the shaker, DNAse I and RNAse A (Roche, Germany) were added to degrade released bacterial nucleic acids. T7 phage nanoparticles were precipitated from the culture supernatant by addition of 1 M NaCl and 10% polyethylene glycol (PEG 6000, Merck) followed by overnight incubation at 4°C. The T7 phage pellet was resuspended in Tris-NaCl buffer (PH 8) and PEG and cell debris was removed by centrifugation at 10,000 rpm for 10 min. To remove residual PEG and debris, an equal volume of chloroform was added, gently inverted and the top aqueous phase was harvested after low-speed centrifugation at 4°C. The purified T7 nanoparticles were sterilized using a pyrogen-free 0.2 µm pore-size cellulose acetate filter (Millipore) and stored at 4°C until further analysis.
Removal of Bacterial Endotoxin from T7 Phage Nanoparticles
The bacterial endotoxin (LPS) concentration in all T7 nanoparticle preparations was determined in triplicate using a sensitive colorimetric Limulus Amebocyte Lysate (LAL) QCL-1000® kit (Lonza, USA) according to the manufacturer's instructions. LPS was removed from T7 phage nanoparticles based on a method for removal of endotoxin from protein solutions by phase separation using Triton X-114 as described by Aida et al. [22] and modified by Hashemi et al. (manuscript submitted for publication).
Genes of T7: http://www.uniprot.org/uniprot/?query=organism%3a10760+keyword%3a1185&offset=25 Thus phage T7 has an icosahedral shape with an edge of 37.7±0.5nm, a volume of (120±10)x103nm3, and a small tail that is 6-7% of the head volume. (STRUCTURE OF BACTERIOPHAGE T7 Small-AngleX-rayandNeutronScatteringStudy)
How T7 infects: http://www.sciencemag.org/content/339/6119/576.full.pdf?sid=178e4a68-d44f-4f10-b403-1ef7f893efa8 (excellent pictures for structure)
3/29/13
DL 3/29 We prepared our presentation on a power point for this upcoming Monday. We will be presenting on the background and structure of T7 and T4
AC 3/29
We put together our powerpoint presentation for Monday. I took all my information from http://www.farisaka.bio.titech.ac.jp/text/CMLS-Leiman-20031.pdf
April
4/3/13
AB 4/3/2013
FINAL PRESENTATION- attend 1 science talk. 11 or 4 on thursdays. Write a paragraph on what made it a good talk. GROUP GRADE: Science talk (15 min): 1-Background (5-10 min) - what's your hypothesis? What question are you answering and why? 2-Method/Results (5-10 min) - usually a cycle 3-Conclusions - should be clear. Be repetitive. Due 4/15/2013
Today we will be setting up an overnight culture of E. coli, to grow for use with phage amplification. We will take a 500 flask; with 50 mL LB broth, and place a culture form the E.coli culture plate to grow overnight. We will create a glycerol stock of the E.coli culture to save in the -80 C freezer. Liquid culture 4/2/2013 We put a colony from our W3110 plate of E.coli into 1mL LB broth and placed in the 37 C incubator overnight. We did this with 5 colonies. Results: the control tube of broth showed no contamination. We also put 500microL of 40% glycerol into cryovials for use tomorrow to prepare freezer sotcks.
DL 4/3
Final project presentation - attend a science talk before and write a paragraph about what made it good/bad what makes a good presentation
- background - hypothesis (why?/what?) 5-10 minutes
- method/results 5-10 minutes
- conclusions
“tell them what you are going to tell them, tell them, then tell them what you just told them” due april 15th
Our T4 phage arrived today.
We also prepared a glycerol stock to save in the -80 C freezer.
Added .5 mL glycerol of 40% glycerol and .5 mL liquid culture from overnights. Put in the -80 C freezer.
AC 4/3
Final Presentation Good Presentation: Background that is gripping and compelling that will draw them into the presentation. (5-10 minutes) Methods / Results Conclusions Be repetitive - Tell them what you’re going to tell them, tell them, and tell them again.
Our T4 phage arrived today, so we will be working on making the overnight E. Coli cultures for work on Friday. We took 50 mL of liquid broth and added some W3310 E Coli from our culture plate and put it in the 37 C incubator overnight
We also put 1 mL of liquid broth in 6 tubes and added a culture of W3310 E Coli to 5 tubes. The control had no contamination the next day.
4/4/13
4/4/2013 AB Glycerol Stocks of W3110 We took the .5mL glycerol in cryovials and added .5mL liquid culture form the overnights prepared on 4/3/2013. We vortex the tubes for about 10s each. Next, we labeled the tubes w3110 E.coli 4/3/2013 and placed them in the -80C freezer.
04/04/13 AC
We made glycerol stocks W3110 E. Coli We put .5mL glycerol in cryovials and .5mL liquid culture from the overnights prepared yesterday. We vortexed each tube for 10 seconds and then we stored the tubes in the -80°C freezer in Dr. Grose’s lab.
4/5/13
04/05/13 AC
We did spot tests of phage on E. Coli BL21 We plated together .5mL of BL21 with 1XLBTA. We separated the plates into different segments and then spot tested the following phages. 14 T3 13 T5 10 T2 20OX171 40ØX174 The plates were then put in a 37°C incubator
4/5/2013 AB
Spot Tests of phage on BL21
We plated .5mL BL21 with 1XLBTA on a plate. Then, we took 5microL of each phage and put them in seperate quadrants on the plate. The phage we used were:
14 T3
13 T5
10T2
20OX174
40ØX174
We then put our 37°C incubator overnight
Results: there were no plaques on any of the plates. There was no contamination in the control quadrant. An uniform bacterial lawn formed with no phage infection.
DL 4/5
We did spot tests of phage on BL21. Plated .5mL BL21 m w/ x1 LBTA. Then took 5 microL of phage and put on seperate quadrants of the plates. The phage we used are: 14 T3 13 T5 10T2 20OX174 40ØX174 We placed these in the 37 C incubator overnight.
4/8/13
DL 4/8
We performed a phage titer spot test on two bacteria. We used the BL21 and W3110 strains of E. coli. We first put 100 microL of broth into epindorf tubes. We then took 10 microL of 1L, 10L, 40T4, T4DOS, and T4 infected phage and placed it in seperate tubes labeled 0. We performed a dilution series adding 10 microL of phage to the tube -1 and continued down to -5. Next we added 4.5 mL of 1x top agar to .5mL of both strains of bacteria and plated it on LB plates. We had previously divided the plates into six sections with the labels 0, -1, -2, -3, -4, and -5. We took the phage from each concentration and spotted it on the plates. We allowed the plates to sit and let the phage soak in. We then placed the plates in the 37 C overnight.
Results: 04/10 40T4 did not grow on W3110. All the other plates formed plaques. All of the plates experienced some sort of running. Controls showed no contamination and grew a lawn of bacteria.
AC 04/08
We performed a phage titer test to determine which bacteria would be most viable for our phage propagation. We used BL21 and W3110 strains of E. Coli. We placed 100 µL of broth into 5 epindorf tubes. We used as phage 10 µL of 1L, 10L, 40T4, T4DOS, and T4 infected phage and placed them each in one of tubes labeled -1. We performed a dilution series taking out 10 µL each time and placing it into the next tube, 5 times. the total volume in the last tube was 110 µL. We added 4.5 mL of 1X top agar to .5 mL of broth and plated it on LB plates. We spotted each concentration on the plates and incubated it overnight at 37°C.
Results from 04/08:
Phage 10L w/ w3110 had large scale infection every concentration Phage 10L w/ BL21 had infection in very large concentrations Phage 1L w/ w3110 had infection in very large concentrations Phage 1L w/ BL21 had infection in very large concentrations Phage T4 DOS w/ w3110 had infection in very large concentrations Phage T4 DOS w/ BL21 had infection in very large concentrations Phage 40 T4 w/ w311o had no phage infection Phage 40 T4 w/ BL21 had large scale infection at every concentration Phage T4 inf w/ w311o had large scale infection at every concentration Phage T4 inf w/ BL21 had large scale infection at every concentration We had a significant amount of running that occurred on almost every plate, so the results were a little difficult to read. We concluded that the phage is a high enough concentration that we would have to do another phage titer to a smaller dilution in order to determine actual concentration. The controls were all a lawn of bacteria.
Results: 04/08 no plaques or phage infection. bacterial lawn grew. no contamination noted.
4/10/13
4/12/13
4/15/13
May
5/1/13
5/3/13
5/6/13
5/8/13
5/10/13
5/13/13
5/15/13
5/17/13
5/20/13
5/22/13
5/24/13
5/27/13
5/29/13
5/31/13
June
6/3/13
6/5/13
6/7/13
6/10/13
6/12/13
6/14/13
6/17/13
6/19/13
6/21/13
6/24/13
6/26/13
6/28/13
July
7/1/13
7/3/13
7/5/13
7/8/13
7/10/13
7/12/13
7/15/13
7/17/13
7/19/13
7/22/13
7/24/13
7/26/13
7/29/13
7/31/13
August
8/2/13
8/5/13
8/7/13
8/9/13
8/12/13
8/14/13
8/16/13
8/19/13
8/21/13
8/23/13
8/26/13
8/28/13
8/30/13
September
9/2/13
9/4/13
9/6/13
9/9/13
9/11/13
9/13/13
9/16/13
9/18/13
9/20/13
9/23/13
9/25/13
9/27/13
9/30/13
