Team:Dundee/Safety

From 2013.igem.org

Revision as of 16:02, 15 August 2013 by Kyleharrison (Talk | contribs)

iGEM Dundee 2013 · ToxiMop

Question 1: Would any of your project idea raise safety issues in terms of:

General

We all attended a general health and safety induction at the beginning of our iGEM project and were given a safety tour of our lab. The tour included guidance with regards to waste disposal of sharps, biohazardous material and trace chemicals. The team members wore disposable gloves and lab coats at all times when working in the wet lab and eliminated risk of contamination spreading outside the laboratory environment by ensuring they removed these items upon exit. Good laboratory practice, such as regular hand-washing and frequent cleaning of workbenches was enforced.

At all times, Safety Operating Procedures (SOPs) for both equipment used in our project and general safety were closely followed. Protective goggles and masks were used when needed (e.g. for SDS-PAGE and exposure to UV light source). While working in the lab, we were supervised by our instructors, advisors or lab technicians from the Dundee University’s School of Life Sciences Learning & Teaching staff to ensure that we were safely carrying out procedures.

Chemical

To reduce risk to our health, we decided to use Qiagen kits (mini-prepping, gel extraction, PCR purification, etc.) rather than phenol based protocols. Ethidium bromide (EtBr) is an intercalating agent (it inserts itself into the DNA helix, unravelling the structure) commonly used as a fluorescent tag (nucleic acid staining) in molecular biology labs for agarose gel electrophoresis. By distorting the helical structure of DNA, ethidium bromide is considered to be a mutagen and carcinogen. In order to avoid risk of exposure to ethidium bromide, we took it upon ourselves to use the GelRed staining method for agarose gel electrophoresis instead.

Biosafety

We used safe bacteria types in the lab: E. coli and and B. subtilis. Escherichia coli is a Gram-negative bacterium which is naturally found in the colon of warm-blooded organisms such as humans. Some strains of E. coli are the cause of serious food poisoning in humans, but the majority are harmless. On the other hand, Bacillus subtilis is a Gram-positive bacterium and has the ability to form a tough, protective endospore. This allows the B. subtilis to tolerate extreme environmental conditions. Bacillus subtilis inhabits the human gut, and is thought to be a natural gut commensal.

We used a few different bacterial strains throughout our project: E. coli MG1655, JM110, 1061 and DH5α. These are all disabled, non-pathogenic, non-toxicogenic, non-colonising, laboratory-adapted K12 strains, which are widely used for research purposes and present absolutely no hazard to human health.

Although the bacterial strains we used are non-pathogenic (and therefore not labelled as a biohazard as such), it is still important that we took measures to prevent any contamination. Any protocols which involved the transfer of bacterial cells or bacterial colonies between plates or tubes were carried out in sterile conditions; close to a Bunsen flame. Otherwise, bacterial cells were stored in lidded containers/universal tubes with the caps sealed tightly. All of the biological waste was disposed of in accordance to lab waste disposal protocols, which involves autoclaving biological waste prior to discarding it. Re-usable containers that had been in contact cells were soaked in Virkon solution to be disinfected.

ii. Public Safety

While carrying out our project, we took utmost care to ensure that neither biological nor chemical materials were released from our lab accidentally. However, if unintentional release were to occur, the bacterial strains that we used would pose very little to no danger to human health. With regards to the E.coli K12 strain derivatives which we used, the lack of danger to people is due to its poor ability to colonize the gut and establish infections. E. coli K12 also appears to lack the ability to produce large quantities of toxins that affect humans. The B. subtilis strains used were of minute danger to the public as well.

We used ampicillin resistant genes within our plasmids as a selectable marker for bacterial transformations. As we are fully aware of the issues surrounding horizontal gene transfer and multi-drug resistant bacteria, we followed university protocols regarding GMO waste disposal. The ultimate goal of our project, as with any other iGEM project, is for our modified bacteria to be used practically in the environment to treat algal blooms by removing microcystin. Our final step would be to remove antibiotic resistance from our plasmid prior to release of our bacteria into the environment.

iii. Environmental Safety

Content Needed!

Question 2: Are any parts or devices in our project associated with (or known to cause):

i. Pathogenicity, infectivity, or toxicity

The strains we used, which were derived from E. coli K12 are non-pathogenic and not capable of colonising the gut, so they cannot cause infection and are do not have the ability to produce dangerous toxins in significant quantities. The exact same information applies to the B. subtilis strains which we used.

ii. Threats to environmental quality

As mentioned previously, any E. coli K12 released into the environment would be expected to survive poorly and would not prove harmful to plants, microorganisms or other animals; the same goes for the B. subtilis strains.

iii. Security concerns

Due to the non-pathogenic, non-toxicogenic, and non-colonising nature of E. coli K12 and B. subtilis strains which we utilised and the harmless nature of our parts, we do not foresee any security concerns with our project. Our laboratory has secure entry to prevent unauthorised access. In the wrong hands, nothing harmful could be done with our parts or bacterial strains.

Question 3: Do any of the new BioBricks parts (or devices) that you made this year raise any safety issues?

Our BioBrick parts are all very safe as they are all natural components of the genetic code of harmless E. coli and B. subtilis strains. Regarding our mop device and microcystin detector containing bacteria, if they burst in the environment for any reason, they might spread lots of the toxin back into the water. Although, what binds to microcystin? – PP1, so if the cells burst, surely the toxin would bind to the protein phosphatase 1 in the water! Nevertheless, the final stage of our project would be our mop and detection bacteria safely contained in a special bag, which when dipped in the algal bloom water, the water (including microcystin) would diffuse in, but the bacteria could not escape out as they are too big. Worst case scenario, the bag bursts …but in the event of that happening, the bacteria most likely won’t be able to survive in the wild. Problem solved!

Question 4: Is there a local biosafety group, committee, or review board at your institution?

Yes there is. Comprehensive risk assessments must be carried out prior to the start any laboratory project and any accidents or spillages of micro-organisms must be reported right away.

We were given a general lab safety induction by the Health and Safety board at the University of Dundee’s College of Life Sciences, which included guidance in waste disposal of biohazardous material. Documents describing Standard Operating Procedures and risk assessments were made available to us online. We also received informal training in various protocols including miniprep, gel extraction, PCR and cell transformation.

Question 5: Do we have other ideas on how to deal with safety or security issues that could be useful for future iGEM competitions? How could parts, devices and systems be made even safer through biosafety engineering?

Perhaps future iGEM teams could be sent an information pack on lab safety and security issues so that every team member all around the world has had the same training before beginning their iGEM project.

With regards to parts, devices and systems being made safer through biosafety engineering, perhaps each project should be reviewed by iGEM before it is allowed to go forward. This could be carried out to avoid any possible safety issues arising during the team’s project which could jeopardise the success of the project in the competition due.