"
Team:TU-Delft/Zephyr
From 2013.igem.org
| Line 5: | Line 5: | ||
<html> | <html> | ||
| - | + | <div style="margin-left:30px;margin-right:30px; width:900px;float:left;"> | |
| - | <div style=" | + | |
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
<p align="justify"> | <p align="justify"> | ||
Zephyr is a low-cost Do It Yourself (DIY) machine which can scan petridishes and 96 well plates for expression of fluorescence at micrometer scale. The Typhoon is the commercial machine that does the same, only it is priced around 120.000 dollars. The main difference is the use of low-cost optics. This allows you to pick exactly which fluorescence you want to detect and not to pay for the ones you do not use. Furthermore, it does not have confocal optics, as this is not that often when scanning bacteria and protein gels. This DIY machine can be built by anyone with one or two days on their hands and the costs are around 1500 dollars. </p> | Zephyr is a low-cost Do It Yourself (DIY) machine which can scan petridishes and 96 well plates for expression of fluorescence at micrometer scale. The Typhoon is the commercial machine that does the same, only it is priced around 120.000 dollars. The main difference is the use of low-cost optics. This allows you to pick exactly which fluorescence you want to detect and not to pay for the ones you do not use. Furthermore, it does not have confocal optics, as this is not that often when scanning bacteria and protein gels. This DIY machine can be built by anyone with one or two days on their hands and the costs are around 1500 dollars. </p> | ||
| Line 582: | Line 566: | ||
<center> | <center> | ||
<img src="https://static.igem.org/mediawiki/2013/0/02/Figure_2_plate_C.png" width="600px" height="424px"/> | <img src="https://static.igem.org/mediawiki/2013/0/02/Figure_2_plate_C.png" width="600px" height="424px"/> | ||
| + | <br><br><br> | ||
Figure 2: Example of the collection of the different parts in the laser program | Figure 2: Example of the collection of the different parts in the laser program | ||
</center> | </center> | ||
Revision as of 16:10, 28 September 2013
Zephyr is a low-cost Do It Yourself (DIY) machine which can scan petridishes and 96 well plates for expression of fluorescence at micrometer scale. The Typhoon is the commercial machine that does the same, only it is priced around 120.000 dollars. The main difference is the use of low-cost optics. This allows you to pick exactly which fluorescence you want to detect and not to pay for the ones you do not use. Furthermore, it does not have confocal optics, as this is not that often when scanning bacteria and protein gels. This DIY machine can be built by anyone with one or two days on their hands and the costs are around 1500 dollars.
Why? Reason d’être
Research is not cheap in general and synthetic biology is no exception. Much of the lab equipment has a price running of ten thousand dollars. For some teams this is no hurdle, their lab has all the equipment they possibly may need, while other teams may struggle with their characterization because of lack of needed equipment. This may be an explanation why in the iGEM competition For most of the mentioned equipment, only the high tech versions are available, which make it so costly. However the simple versions of these machines would be enough in most cases. As an analog: there are only high tech Bentleys available and no Ford Fiestas, while these Fiestas would be enough for simple transportation.
Therefore we decided to build a low-cost Typhoon, which would be easy to make on your own. This machine is of course not as high-tech as the Typhoon, but it measures at the same scale and has roughly the same performance.
What? Working principle
How? The Zephyr DIY guide Overview
Part list
In Table 1 the parts are listed into three categories: optical-, electrical- and mechanical components with a possible online store to buy the components. The plastic PMMA sheets are difficult to acquire online, it usually works the best to contact a local plastic supplier. Most of the mechanical parts can be swapped out for ones with the same dimensions, e.g. the bearings.
Note that in this list only dichroic parts for GFP are listed, for other wavelengths other parts are necessary. The dichroic parts are the excitation- and emission filter and the dichroic mirror itself. For many fluorescent proteins Edmund Optics has listed a good choice for these. If your fluorescent protein is not on there, the following guidelines may help you: Find out the emission frequency of your protein, pick the frequency of the 25 mm emission filter as close as possible. Pick the dichroic 25.2 x 35.6mm mirror 20 nm lower than this frequency and the 25 mm excitation filter 40 nm lower than the emission filter.
In addition to these filters and the mirror, you will also need a high power LED. The emission frequency of this LED should be very close to the frequency of the emission filter. Many of these LEDs are available on superbrightleds.com.
| Code | Name | Material [B/C] | Thickness [mm] | Quantity |
|---|---|---|---|---|
| A1 | Dichroic bottom | B | 5 | 2 |
| A2 | Dichroic side ort 1 | B | 5 | 1 |
| A3 | Dichroic side ort 2 | B | 5 | 1 |
| A4 | Dichroic ort exc filter | B | 5 | 1 |
| A5 | Dichroic below emm.filter | B | 3 | 1 |
| A6 | Dichroic after emm. filter | B | 5 | 1 |
| A7 | Dichroic before exc. filter | B | 5 | 1 |
| A8 | Dichroic holder | B | 5 | 2 |
| A9 | Dichroic LED side 1 | B | 5 | 1 |
| A10 | Dichroic LED end | B | 5 | 1 |
| A11 | Dichroic LED side 1 | B | 5 | 1 |
| B1 | Holder side | B | 5 | 2 |
| B2 | Holder side LED | B | 5 | 1 |
| B3 | Holder front (bottom) | B | 5 | 1 |
| B4 | Holder front (middle) | B | 5 | 1 |
| B5 | Holder front (top) | B | 5 | 1 |
| B6 | Holder bottom | B | 5 | 1 |
| B7 | Holder dichroic | B | 5 | 2 |
| B8 | Eyepiece holder bottom | B | 5 | 1 |
| B9 | Eyepiece holder top | B | 5 | 1 |
| B10 | Objective holder plate | B | 5 | 1 |
| C1 | Frame bottom | C | 5 | 1 |
| C3 | Frame step side | C | 5 | 4 |
| C4 | Frame axis low | C | 5 | 4 |
| C5 | Frame high axis | C | 5 | 4 |
| C6 | Frame pouley side | C | 5 | 4 |
| C7 | Frame top | C | 5 | 1 |
| C8 | Frame arduino bottom | C | 5 | 1 |
| C9 | Frame arduino side | C | 5 | 2 |
| C10 | Frame arduino end | C | 5 | 2 |
| C11 | Slider orthogonal | C | 5 | 12 |
| C12 | Slider par. inside | C | 5 | 4 |
| C13 | Slider par. outside | C | 5 | 4 |
| C14 | Slider top | C | 5 | 12 |
| C15 | Belt connector | C | 5 | 2 |
| C16 | Low slider parallel | C | 5 | 4 |
| C17 | High slider orthogonal | C | 5 | 4 |
| C18 | High slider parrallel | C | 5 | 4 |
| C19 | Slide axis | C | - | 4 |
| C20 | Slide beam | C | - | 2 |
| D1 | Carrier bottom | C | 5 | 1 |
| D2 | Carrier petridish | C | 3 | 1 |
| D3 | Carrier 96well | C | 3 | 1 |
| D4 | Carrier minipetr. | C | 3 | 1 |
Making of the parts
In total 41 unique parts must be made out of plastic using laser cutting. These parts are dived into four categories: A to D. A are the parts of the dichroic holder including the LED holder. B are the parts of the optical holder, C are the frame parts and D are the parts that hold petridishes and the 96 well plates. In the table below the parts are listed with their name and their coding (e.g. B3).
| Mechanical parts | |||
|---|---|---|---|
| PMMA clear 6mm thick, 870 mm x 540 mm | The plastic for the frame | 1 | - |
| PMMA clear 6mm thick, 515 mm x 290 mm | The plastic for the frame | 1 | - |
| PMMA clear 3mm thick, 300 mm x 150 mm | The plastic for the frame | 1 | - |
| Linear bearring 15 mm 8 mm 24 mm | Bearrings allowing sliding | 8 | link 1 |
| Pouley 30 tooths, 6 mm diameter hole | Pouley to move the belt | 8 | link 2 |
| Belt 950 mm, 380 tooths | Drive belt | 4 | link 3 |
| Axis 8MM diameter 312 mm length | C19 | 4 | link 4 |
| Axis 8MM diameter 335 mm length | C20 | 2 | link 5 |
| Bearring inside diameter 6 mm outer diameter 19 mm | Bearrings to hold pouleys | 4 | link 6 |
| Fixation rings 8 mm | To fixate the axis | 12 | link 7 |
| SM1V10 - Ø1" SM1 Lens Tube, 1" Long External Threads | Lens tube allowing focussing | 1 | link 8 |
| CP4S - SM1-Threaded 30 mm Cage Plate, 4 mm Thick | Plate mounting for the lens | 1 | link 9 |
| SM1A3 - Adapter with External SM1 Threads and Internal RMS Threads | Adapter between different threads | 1 | link 10 |
| M6 bolts x 40 mm +nuts | 4 to support the pouleys and 4 for the holding of the objectie plate | 8 | - |
| M3 bolts x 20 mm + nuts | To tightent belts to sliders | 8 | - |
| Black paint | e.g. exhaust paint | 1 | - |
| Heat transfer double sided tape | To fixate the high power LED | 1 | link 11 |
| Glue | To fixate webcam | - |
Table 1: The parts to buy of the Zephyr, including dichroic parts for GFP detection.
For all these parts technical drawings are available below or bundled in this pdf. Note that these are the dimensions that result from using the laser cutting method.
Figure 1: The Individual technical drawings of the parts to make
So, how to make these parts? For laser cutting the parts to make must usually be supplied a ‘dxf’-format, this is a file containing the 2D structure of the different parts. For all the different parts these files can be found in this zip-file. These digital files can be directly sent to a company that can make them for you or a technician at a university. The three plastic plates will suffice to make all the parts according to the quantity. You will have to ask them to combine them in a smart way for you on the plate. This would look something in Figure 2.
Figure 2: Example of the collection of the different parts in the laser program
After these parts are cut, some must become black in order to
Assembly of the parts
Wiring the circuits
Arduino code, microprocessor
The Arduino controls both the LED, all the motors and communicates with the PC. Attached is the Arduino code file [link_to_arduino_file], which can be uploaded to the Arduino using the supplied software link.
Control software
Image processing
Explanation of the design
Desired specifications
Specific justifications
Results
Sensitivity and linearity
Petridish reading
Conclusions
Design in general
Resulting specifications
Discussion / Future aspirations
