Team:Bielefeld-Germany/Acknowledgements
From 2013.igem.org
Line 53: | Line 53: | ||
- | * Our Instructor Dr.Jörn Kalinowski for giving us the opportunity to participate in iGEM through letting us work in his lab. We were provided with our own laboratory room and could use all instruments and materials of the lab. Furthermore, Jörn helped us with scientific guidance, financing and was always available for answering questions. | + | * Our Instructor Dr. Jörn Kalinowski for giving us the opportunity to participate in iGEM through letting us work in his lab. We were provided with our own laboratory room and could use all instruments and materials of the lab. Furthermore, Jörn helped us with scientific guidance, financing, paper work and was always available for answering questions. |
- | * | + | * Prof. Dr. rer. nat. Erwin Flaschel for providing us with lab space. We were able to use all the fermentation and downstream processing equipment we needed in his Fermentation Engineering lab. Additionally, he helped us finding sponsors by mediating contacts. |
- | * | + | * Our Instructor Dr. Christian Rückert, who always gave great advice for our scientific problems. |
- | * | + | * Nils Christian Lübke and Timo Wolf as former iGEM team members helped us with their experience listened to our endless discussions and problems during our weekly team. Thank you for being such great advisors and giving us the chance to develop our complete own project without any rules. Thank you for your trust. |
- | *Dr. | + | * Prof. Dr. Karl Friehs – By inspecting our Biosafety-System, he had the idea of using the RNase Ba (Barnase) instead of the Colicin E2 as toxic gene product. Besides he gave us the hint to use a double lac promoter to reduce the basal transcription of the lac promoter. |
- | * | + | *Dr. Falk Harnisch for being a great expert – Via Skype we discussed about our project and he visited us in Bielefeld to inspect our MFC so that we were able to benefit a lot from his enormous knowledge! |
- | * | + | * Robert Braun as former iGEM team member helped us with his experience, listened to our discussions and problems during our weekly lab work. |
- | * | + | * Johanna Mueschner and Ann-Christin Kull – For sequencing our biobricks and especially for getting our devices at the last minute verified. |
- | * | + | * Markus und Lena who helped us with the practical performance of LC-ESI MS/MS. |
+ | |||
+ | |||
+ | * Dominik Cholewa and Phillip Grimm who helped us with materials for constructing our Microbial Fuel Cell. | ||
+ | |||
+ | |||
+ | * Maurice Telaar for his expertise with molecular cloning. | ||
+ | |||
+ | |||
+ | * We want to thank Prof. Dr. Alfred Pühler for promoting our work an giving us the opportunity to host CeBiTec Student academy. | ||
+ | |||
+ | |||
+ | * Nikolas Kessler as a former iGEM team member gave us guidance especially with web and graphic design. | ||
+ | |||
+ | |||
+ | * Armin Neshat as a former iGEM team member helped us with our everyday questions and ordered all our chemicals. | ||
+ | |||
+ | |||
+ | * Dr. Heino Büntemeyer – who helped us with HPLC of Riboflavin. | ||
+ | |||
+ | |||
+ | * Prof. Dr. Thomas Noll helped us finding sponsors by mediating contacts. | ||
+ | |||
+ | |||
+ | * Dr. Werner Selbitschka for inviting us to the student academy and with organizing it. | ||
+ | |||
+ | |||
+ | * Dr. Petra Lutter for helping us getting started with the model. | ||
+ | |||
+ | |||
+ | * Elene Berz from Bielefeld university press department who helped us with our first press release. | ||
+ | |||
+ | |||
+ | * The working group of Prof. Dr. Dario Anselmetti, with special help from Dr. Volker Walhorn, who measured our self-prepared AFM glass slides and visualized the cell surface of Escherichia coli with porins by atomic force microscopy. | ||
+ | |||
+ | |||
+ | * Vera Ortseifen who gave us support dealing with protein analysis by MALDI-TOF MS. | ||
+ | |||
+ | |||
+ | * Thomas Schäffer for fixing any laboratory equipment that needed for constructing our Microbial Fuel Cell. | ||
+ | |||
+ | |||
+ | * Workshop of the biological and technical faculty for making items of our Microbial Fuel Cell. | ||
+ | |||
+ | |||
+ | * All members of the Coryne AG for sharing the lab and equipment with us as well as helping us with our everyday questions. | ||
+ | |||
+ | |||
+ | * All members of the Fermentation Engineering AG for sharing the lab and equipment with us as well as helping us with our everyday questions. | ||
+ | |||
+ | |||
+ | * All family members and friends that we have neglected in the last few months and still support us. | ||
+ | |||
Revision as of 08:43, 4 October 2013
Attributions
After a lot of brainstorming, discussion and presentations in self-organized team meetings over the first months, we decided to work on a Microbial Fuel Cell, although this issue is very complex and there is hardly no expertise in this area of research at our university. iGEM-Team Bielefeld 2013 team members are probably the first people at the University of Bielefeld, who built an Microbial Fuel Cell.
All work described on this wiki or on our Partsregistry pages was done by ourselves. We managed the whole project, from planing to financing and the complete lab work by ourselves. Nevertheless we could not have done all this work without the help, advice and guidance of several people. Hence, special thanks to the following people you can see under Acknowledgements part.
Acknowledgements
Thanks to:
- Our Instructor Dr. Jörn Kalinowski for giving us the opportunity to participate in iGEM through letting us work in his lab. We were provided with our own laboratory room and could use all instruments and materials of the lab. Furthermore, Jörn helped us with scientific guidance, financing, paper work and was always available for answering questions.
- Prof. Dr. rer. nat. Erwin Flaschel for providing us with lab space. We were able to use all the fermentation and downstream processing equipment we needed in his Fermentation Engineering lab. Additionally, he helped us finding sponsors by mediating contacts.
- Our Instructor Dr. Christian Rückert, who always gave great advice for our scientific problems.
- Nils Christian Lübke and Timo Wolf as former iGEM team members helped us with their experience listened to our endless discussions and problems during our weekly team. Thank you for being such great advisors and giving us the chance to develop our complete own project without any rules. Thank you for your trust.
- Prof. Dr. Karl Friehs – By inspecting our Biosafety-System, he had the idea of using the RNase Ba (Barnase) instead of the Colicin E2 as toxic gene product. Besides he gave us the hint to use a double lac promoter to reduce the basal transcription of the lac promoter.
- Dr. Falk Harnisch for being a great expert – Via Skype we discussed about our project and he visited us in Bielefeld to inspect our MFC so that we were able to benefit a lot from his enormous knowledge!
- Robert Braun as former iGEM team member helped us with his experience, listened to our discussions and problems during our weekly lab work.
- Johanna Mueschner and Ann-Christin Kull – For sequencing our biobricks and especially for getting our devices at the last minute verified.
- Markus und Lena who helped us with the practical performance of LC-ESI MS/MS.
- Dominik Cholewa and Phillip Grimm who helped us with materials for constructing our Microbial Fuel Cell.
- Maurice Telaar for his expertise with molecular cloning.
- We want to thank Prof. Dr. Alfred Pühler for promoting our work an giving us the opportunity to host CeBiTec Student academy.
- Nikolas Kessler as a former iGEM team member gave us guidance especially with web and graphic design.
- Armin Neshat as a former iGEM team member helped us with our everyday questions and ordered all our chemicals.
- Dr. Heino Büntemeyer – who helped us with HPLC of Riboflavin.
- Prof. Dr. Thomas Noll helped us finding sponsors by mediating contacts.
- Dr. Werner Selbitschka for inviting us to the student academy and with organizing it.
- Dr. Petra Lutter for helping us getting started with the model.
- Elene Berz from Bielefeld university press department who helped us with our first press release.
- The working group of Prof. Dr. Dario Anselmetti, with special help from Dr. Volker Walhorn, who measured our self-prepared AFM glass slides and visualized the cell surface of Escherichia coli with porins by atomic force microscopy.
- Vera Ortseifen who gave us support dealing with protein analysis by MALDI-TOF MS.
- Thomas Schäffer for fixing any laboratory equipment that needed for constructing our Microbial Fuel Cell.
- Workshop of the biological and technical faculty for making items of our Microbial Fuel Cell.
- All members of the Coryne AG for sharing the lab and equipment with us as well as helping us with our everyday questions.
- All members of the Fermentation Engineering AG for sharing the lab and equipment with us as well as helping us with our everyday questions.
- All family members and friends that we have neglected in the last few months and still support us.
Subteams