Team:Bielefeld-Germany/Labjournal/July

From 2013.igem.org

Revision as of 21:49, 4 October 2013 by Sgrenz (Talk | contribs)




July


Milestones

  • Poster presentation at the congress ‘[http://www.biotechnologie2020plus.de Next generation of biotechnological processes 2020+]’ in Berlin.
  • Sponsoring acquisition is nearly finished.
  • Problem with cloning delaying the progress in the laboratory.
  • We have published our [http://ekvv.uni-bielefeld.de/blog/uniaktuell/entry/mit_bakterien_batterie_strom_erzeugen first press release] with a great response. The press release was picked up worldwide.






9.Week

Organization

  • We’ve presented us at the congress ‘[http://www.biotechnologie2020plus.de Next generation of biotechnological processes 2020+]’ in Berlin at 27. June 2013. There we have met an expert (Dr. Falk Harnisch) on the topic of MFC and we have decided to participate the 'Day of Synthetic Biology in Germany'.


MFC

Mediators

Cytochromes

  • Design and order of new Primers
    • The mtrCAB fragment has two illegal PstI restriction sites at 1793bp and 2078bp, so specific primers to remove them had to be designed. One base in each restriction site was replaced by respective primer overlaps without affecting the coding triplett. The three different fragments will be ligated back together and into the pSB1C3 shipping plasmid via Gibson Assembly.
    • mtrCAB_Frag1_rev (30 nt): GACCTGTTTTATCTGTTGCAGCGGCAGTAT
    • mtrCAB_Frag2_fwd (30 nt): ATACTGCCGCTGCAACAGATAAAACAGGTC
    • mtrCAB_Frag2_rev (30 nt): GGTGTGACGACTAATGCCATAATTGCAGAC
    • mtrCAB_Frag3_fwd (30 nt): GTCTGCAATTATGGCATTAGTCGTCACACC

Biosafety

Nanowires

  • Primerdesing for isolation of gene-cluster GSU 1776-1784 from Geobacter sulfurreducens, containing overlaps for Biobrick Prefix and Suffix:
    • Forward GSU 1776-1784 (41):
      GAATTCGCGGCCGCTTCTAGATGCTGAAACGTTTTCGTAAC
    • Reverse GSU 1776-1784 (44):
      CTGCAGCGGCCGCTACTAGTATCATCCTACAGTGCCGGCAATTT


  • Successful genome isolation from Geobacter sulfurreducens strain, using the GenEluteTM Bacterial Genomic DNA-Kit to prevent vigorous fragmentation of the DNA, which arises out of the standard genome isolation method with a ribolyse-step.
  • Successful PCR with Forward and Reverse Primer GSU Promoter 1496-1505 and GSU 1496-1505 on the appropriate gene-cluster of Geobacter sulfurreducens, using the PCR Master Mix, described in table X, with adjusted template volume and the standard PCR program for amplification of Geobacter sulfurreducens gene cluster (table X).
  • GSU Promoter 1496-1505 and GSU 1496-1505 PCR products were isolated and purified by gel extraction.


Figure 5: Agarosegel from PCR on the gene-clusters GSU Promoter 1496-1505 (bands 2-5) and GSU 1496-1505 (bands 7-10) of Geobacter sulfurreducens strain. Ladder: GeneRuler™ 1 kb DNA Ladder from Thermo Scientific.





10.Week

Organization

  • We can present new sponsors of iGEM-Team Bielefeld: Stockmeier, Baxter, Promega, BIO.NRW and Applichem will support our team.


MFC

Mediators


Biosafety

Porines


Nanowires

  • PCR with Forward and Reverse Primer GSU 1776-1784 on the appropriate gene-cluster of Geobacter sulfurreducens strain, using the PCR Master Mix, described in table X with adjusted template volume and the standard PCR program for amplification of Geobacter sulfurreducens gene cluster (table X) did not work as expected.
  • Bands of several sizes, but no band at the expected size of 9000 bp, the length of GSU 1776-1784. Because of the correct band for the control PCR on the gene cluster GSU Promoter 1496-1505 a problem with the PCR program can be eliminated.


Figure 6: Agarose gel from PCR on the gene-clusters GSU 1776-1784 (bands 2-5), the GSU Promoter 1496-1505 (band 7) and Geobacter sulfurreducens strain. Ladder: NEB 2-Log DNA Ladder (0.1-10.0 kb).






11.Week

Organization

  • We’ve presented us at the congress “[http://www.bio.nrw.de/studentconvention BioNRW pHD Student Convention]” in Düsseldorf at 13. July 2013 with a short presentation about iGEM and our project.
  • We proudly present our [http://ekvv.uni-bielefeld.de/blog/uniaktuell/entry/mit_bakterien_batterie_strom_erzeugen first press release.] It was amazing to see how often our press release was picked up.


MFC

Mediators

  • Glycerol dehydrogenase
    • Repeating Gibson Assembly shows every time a religated pSB1C3, a Gibson overlap of Prefix and Suffix with 20 bp seems to be to short, furthermore Prefix and Suffix have too many homologous regions.


Biosafety

Porines

  • Repeating Gibson Assembly shows every time a religated pSB1C3, a Gibson overlap of Prefix and Suffix with 20 bp seems to be to short, furthermore Prefix and Suffix have too many homologous regions.


Nanowires

  • Gibson Assembly with GSU 1491-1495, GSU 1496-1505 and GSU Promoter 1496-1505 PCR product as one fragment and the pSB1C3 PCR product, using the primer with Prefix and Suffix specific overlaps, as the second DNA fragment.
  • Screening of colonies from Gibson Assembly by plasmid restriction analysis shows fragments of 2000 bp, which corresponds to religated pSB1C3.
  • PCR with Forward and Reverse Primer GSU 1776-1784 on the appropriate gene-cluster of Geobacter sulfurreducens strain, using the PCR Master Mix, described in table X with adjusted template volume was repeated with the standard PCR program for amplification of Geobacter sulfurreducens gene cluster (table X) modified by a gradient of different annealing temperatures in a range of 45 °C to 65 °C.
  • No bands at the expected size of 9000 bp.





12.Week

Organization

  • Dr. Falk Harnisch will have a presentation at CeBiTec colloquium as an expert for our team.
  • Preparing experiments for the ‘Day of Synthetic Biology’. Our ideas are to have different experiments like DNA isolation from fruit and vegetables, pipetting of bright colors, chromatography with markers, a potato battery or microscopy.
  • The TV station [http://www1.wdr.de/mediathek/video/sendungen/lokalzeit/lokalzeit-owl WDR] would like to contribute with us on our topic.


MFC

Mediators

  • Glycerol dehydrogenase
    • New Primerdesign for pSB1C3 with longer overlaps individually for each part in order to stop the problem of religated pSB1C3:
    • Forward Primer pSB1C3 GldA (43 bp): TCCTGCAAGAGTGGGAATAATACTAGTAGCGGCCGCTGCAGTC
    • Reverse Primer pSB1C3 GldA (43 bp): GATTGAATAATGCGGTCCATCTAGAAGCGGCCGCGAATTCCAG


Cytochromes

  • Amplification of Fragment1 with Phusion polymerase
    • Size: 1833 bp
    • Gradient: 54°C - 71°C over 8 steps
    • Primer: mtrC_fwd & mtr_Frag1_rev
    • Template: S. oneidensis PCR Template from genomic DNA
    • Notes: Annealing temperature has no significant impact on the PCR
  • Amplification of Fragment2 with Phusion polymerase
    • Size: 321 bp
    • Primer: mtr_Frag2_fwd & mtr_Frag2_rev
    • Template: S. oneidensis PCR Template from genomic DNA
    • Notes: Annealing temperature has no significant impact on the PCR
  • Amplification of Fragment3 with Phusion polymerase
    • Size: 3057 bp
    • Gradient: 54°C - 71°C over 8 steps
    • Primer: mtr_Frag3_fwd & mtrB_rev
    • Template: S. oneidensis PCR Template from genomic DNA
    • Notes:
  • Amplification of ccmAH cluster
    • Size:6311 bp
    • Program: PhusionPCR
    • Gradient: 51.5°C - 68°C over 8 steps
    • Primer: ccmAH_fwd & ccmAH_rev
    • Template: E. coli PCR Template from genomic DNA
    • Notes: A high annealing temperature of 68°C or more increases yield as well as reduces unspecific bands and is therefore recommended.

Figure 1: Results of a PAGE of an amplification of ccmAH; Expected Size: 6.3kb; Gradient: 51.5-68°C; Ladder:Thermo Scientific GeneRuler™ 1 kb DNA Ladder.


  • Gelextraction and cleanup of Fragment 1, 2, 3 and ccmAH
    • Elution buffer was preheated to 50°C
    • We eluted each column twice, with 20 ul each and combined it afterwards
    • Measurement of nucleid acid concentration via NanoDrop
      • Fragment1: 4-2607-304: 10.5 ng/ul
      • Fragment2: 4-2707-003: 44.6 ng/ul
      • Fragment2: 4-2707-004: 13.5 ng/ul
      • Fragment3: 4-2607-301: 11.1 ng/ul
      • Fragment3: 4-2607-302: 8.9 ng/ul
      • Fragment3: 4-2607-303: 9.2 ng/ul
      • ccmAH: 4-2807-302: 11.0 ng/ul
      • ccmAH: 4-2807-303: 11.5 ng/ul


Biosafety

Porines

  • New Primerdesign for pSB1C3 with longer overlaps individually for OprF part in order to stop the problem of religated pSB1C3:
  • Forward Primer pSB1C3 OprF (43 bp): TTGAAGCCCAAGCTAAGTAATACTAGTAGCGGCCGCTGCAGTC
  • Reverse Primer pSB1C3 OprF (43 bp): AAGGTGTTTTTCAGTTTCATCTAGAAGCGGCCGCGAATTCCAG

Nanowires

  • Multiple Gibson assembly retries with different molar ratios of the two fragments results every time in religated pSB1C3 plasmids, so that the used Gibson overlap of Prefix and Suffix is not useable.
  • Design of new primers for pSB1C3 amplification with longer sequence-specific overlaps for every part:
    • Forward pSB1C3 GSU 1491-1505 / GSU 1496-1505 / GSU Promoter 1496-1505 (43 bp):
      GGGACGAGGTTCGTTTATGATACTAGTAGCGGCCGCTGCAGTC
    • Reverse pSB1C3 GSU 1496-1505 (43 bp):
      GTATGGGGGTAATTGGCCAACTCTAGAAGCGGCCGCGAATTCC
    • Forward pSB1C3 GSU 1491-1495 (43 bp):
      TTGGCATGGATGAGGAGTGATACTAGTAGCGGCCGCTGCAGTC
    • Reverse pSB1C3 GSU 1491-1495 / GSU 1491-1505 (43 bp):
      CCCAGTCTGCTAGCCTGCATCTAGAAGCGGCCGCGAATTCCAG
    • Reverse pSB1C3 GSU Promoter 1496-1505 (43 bp):
      ACTCGGTGACGGATCCTATCCTCTAGAAGCGGCCGCGAATTCC










13.Week

Organization

  • Spontaneous visit of [http://www.radiobielefeld.de Radio Bielefeld] in our laboratory. In addition to a radio interview a [http://www.radiobielefeld.de/programm/bei-uns-im-programm/studenten-entwickeln-biobatterie.html short video clip] was filmed.


MFC

Mediators

  • Phenazine

Almost ten PCRs were run up to this time. Unfortunately, none of them was successful. We show only two gel pictures out of many, where two different gradients were taken. We have tried to add betain as a stabilizing agent, work with [http://www.millipore.com/publications.nsf/a73664f9f981af8c852569b9005b4eee/31140b3dbc2b4146852579d8005e9c72/$FILE/PR3366EN00.pdf KOD Hot Start polymerase] according to the manual. We tried different extention times and annealing in different temperatures.
The fragment PhzABCDEFGH contains 8 illegal restriction sites and is 8505 bp long. After trying all strategies, we decided to abandon this sub-project and start with another endogenous mediator, riboflavin (see Labjournal August)

  1. Recipe PCR
    • 2x KOD Xtreme™ PCR Buffer: 25 µL
    • dNTPs: 1,0 µL
    • Primer1: 1,0 µL
    • Primer2: 1,0 µL
    • Template DNA: 1,5 µL
    • DMSO: 1,5 µL
    • Betain: 12,5 µL
    • KOD Hot Start Polymerase: 0,5 µL
    • Dest. H2O: 6 µL
    • Total volume: 50 µL
  2. Protocol PCR Two-step Cycling
    • Polymerase Activation 94 °C for 2 min
    • Denaturation 98 °C for 10 s
    • Annealing gradient 50.8 °C-70.2 °C
    • Extension 72°C for 270 sec/320 sec


PCR for PhzABCDEFGH-gene cluster, gradient with KOD-Polymerase, 270s extension
PCR for PhzABCDEFGH-gene cluster, gradient with KOD-Polymerase, 320s extension












As is clear from the gels, we were not able to amplify the fragment and have closed this sub-project.

Biosafety

  • Amplification of different fragments:
  • Recipe:
    • PhusionBuffer: 5,5µL
    • dNTPs: 1µL
    • Primer1: 1µL
    • Primer2: 1µL
    • Template: 1,5 µL
    • DMSO: 0,5 µL
    • Phusion: 0,5 µL
    • Dest. H2O: 39 µL


  • 1.AraC:
    • Primer: araC_d1+ araC_d2
    • Annealing: 62°C
    • Extension: 1min
    • Template: E.coli Genome
    • Size: 600 bp


  • 2.Deletion of araC:
    • Primer: araC_d3+ araC_d4
    • Annealing= 62°C
    • Extension: 1min
    • Template: E.coli Genome
    • Size: 600 bp


  • 3.Amplification of araC into our Biosafety system:
    • Primer: araC_fwd+ araC rev
    • Annealing= 62°C
    • Extension: 1min
    • Template: BBa_I13458
    • Size: 900 bp


  • 4.Preparation of pSB1C3:
    • Primer: pRha_rev+ pSB1C3_rha_suf
    • Annealing: 62°C
    • Extension: 1.30 min
    • Template: BBa_I13541
    • Size: 3 kb


  • 5.Preparation of pSB1C3:
    • Primer: pSB1C3_alr_fwd+ pSB1C3_alr_rev
    • Annealing: 62°C
    • Extension: 1 min
    • Template: E.coli Genome
    • Size: 1kb


  • 6.Preparation of pSB1C3:
    • Primer: pSB1C3_plac_alr+ pSB1C3_alr_rev
    • Annealing: 62°C
    • Extension: 1min
    • Template: E.coli Genome
    • Size: 1kb


  • 7.Preparation of pSB1C3:
    • Primer: pSB1C3_alr_pre+ pSB1C3_alr_suf
    • Annealing: 62°C
    • Extension: 1.30 min
    • Template: pSB1C3
    • Size: 2kb


  • 8.Preparation of pSB1C3:
    • Primer: pSB1C3_plac_pre+ pSB1C3_alr_suf
    • Annealing: 62°C
    • Extension: 1.30min
    • Template: pSB1C3
    • Size: 2kb


  • Analysis by agarosegel
    • Result:failed


  • New PCR:
    • Program: 06 phy_cyt mit 62°C Annealing
    • 10µL 5xHF-Buffer
    • 4µL dNTPs
    • 0,5µL Primer1
    • 0,5µL Primer2
    • 1µL Template
    • 1,5µL DMSO
    • 1µL Enzyme
    • 31,5µL dest. H2O


  • Analysis by agarosegel:
Gelanalysis of PCR 1-4.
Gelanalysis of PCR 5-8.


  • PCR-Purification:
    • BS1a (9-38-451) 113,6ng/µL
    • BS1b (9-38-452) 75,1 ng/µL
    • BS2a (9-38-453) 85,5 ng/µL
    • BS3a (9-38-454) 107,6 ng/µL
    • BS4a (9-38-455) 14,4 ng/µL
    • BS5a (9-38-456) 44,5 ng/µL
    • BS5b (9-38-457) 49,0 ng/µL
    • BS6a (9-38-458) 63,6 ng/µL
    • BS7a (9-38-459) 6,9 ng/µL
    • BS8a (9-38-460) 8,6 ng/µL


  • Successful PCR on the BBa_J04450 Biobrick plasmid using part specific Forward and Reverse Primer (Week 12) for later Gibson Assembly. Isolation of the pSB1C3 PCR product by agarose gel electrophoresis and gel extraction.
  • Gibson Assembly, using the different new pSB1C3 PCR products and the according gene-cluster PCR products.