Header
Contents |
Overview
We knew we wanted to bind Nanoparticles to the Bacteria using the very strong interaction between biotin and streptavidin.
Next we needed to decide which strategy would be the best so the E.coli expresses streptavidin on the outer membrane.
E.Coli are Gram-negative bacteria and they have two membranes, an inner one and an outer one, separated by a periplasmic space. Furthermore, the outer membrane is covered with a glycocalix, a layer of sugars.
There are different ways to express a heterologous protein on the outer membrane of E.coli. Peptides can be fused with outer membrane proteins or on fimbriae, fused to beta-autotransporters or lipoproteins, as for example the (Lpp)-OmpA protein. But then there is also another promising display system based on the use of ice nucleation protein (INP) from Pseudomonas syringae. Which we decided to use.
Our Biobricks
![Biobrick](https://static.igem.org/mediawiki/2013/thumb/4/46/Team-EPF-Lausanne_Biobrick.jpg/500px-Team-EPF-Lausanne_Biobrick.jpg)
For Details, please move the cursor onto the image.
Ice nucleation Protein
INP originates from the bacteria Pseudomonas syringae. It is an outer membrane protein. That has successfully been used for cell surface display of enzymes, antibodies and antigens.
Streptavidin
Streptavidin originates from the bacterium Streptomyces avidinii. It is a tetrameric protein, each of the four subunit can bind one biotin molecule with a very high affinity.
For our Biobricks we used three different kinds of streptavidin.
pBS1C3
The three biobricks were cloned into the standard iGEM backbone plasmid, which contains a chloramphenicol resistance for selection.
We decided to engineer a fusion protein between Ice nucleation protein (INP) and Streptavidin. Because such fusion proteins have been successfully used for cell surface display of enzymes, single-chain antibodies and antigens. So we assumed it would work for streptavidin as well. Especially because Jung et al ([http://www.ncbi.nlm.nih.gov/pubmed/9624691 1]) even succeeded to express a functional surface enzyme, that was much bigger than streptavidin.
Ice nucleation protein is a glycosyl-phosphatidyliositol anchored outer membrane protein, this motif is quite unique in prokaryotes. When it is expressed in E.coli over 90% of INP is found in the outer membrane, Wolber et al ([http://www.pnas.org/content/83/19/7256.short 2]).
Streptavidin
Streptavidin originates from the bacterium Streptomyces avidinii ([http://www.ncbi.nlm.nih.gov/nuccore/A00743.1 NCBI]). It is a tetrameric protein, and each of the four subunits can bind biotin with a very high affinity.
We cloned three Biobricks that contain different versions of streptavidin.
BBa_K1111012
Encodes a fusion protein between INP and a monovalent streptavidin provided by the laboratory of Mark Howarth at Oxford university Department of Biochemistry ([http://users.ox.ac.uk/~bioc0756/MyWebs/activesite/index.htm 3])
BBa_K1111013
Encodes a fusion protein between INP and a dead version of streptavidin. It was designed to serve as a negative control for the microscopy functional assays, because its affinity to biotin is much lower.
BBa_K1111014
Encodes a fusion protein between INP and streptavidin we received in the Biobrick BBa_K283010 ([http://parts.igem.org/Part:BBa_K283010 BBa_K283012, Main Page]).
INP-YFP Characterization
There is a Biobrick that contains INP in the iGEM registry (BBa_K523013). It was designed by the Edinburgh 2011 iGEM team. This Biobrick encodes a fusion protein of a truncated and codon optimized INP and yellow fluorescent protein (YFP) under control of the Lac promoter. The INP is truncated, it only contains the first 211 and last 97 amino acids that are normally encoded by the inaK gene. This is enough to target it to the outer membrane.
We improved the Biobrick BBa_523013 by extensively characterizing it.
We used confocal microscopy to see if it was expressed and eventually show surface localization.
Thanks to Thierry Laroche for taking the images with the confocal microscope.
Looking at E.coli we noticed that fluorescence was localized in specific specks, that the team of Edinburgh didn’t describe. We started looking for an explanation for this phenomena and found in the literature that INP forms aggregates in the cell membranes [http://www.ncbi.nlm.nih.gov/pubmed/2203606 [3]] This suggests that INP also forms aggregates when it is fused to other proteins. We continued characterizing this biobrick by first determining the percentage of bacteria that were fluorescent. We found that approximately 30% of E.coli expressed YFP.
The team of Edinburgh grew bacteria and lysed them. After centrifugation, they looked where the fluorescence seemed concentrated. On the transformed bacteria, it was mainly the pellet that appeared fluorescent, meaning that the fusion protein was embedded in the membrane. The negative control, in contrast, showed fluorescence in the pellet as well as in the supernatant with the same intensity. This method was used because their microscopy was not good enough.
The confocal microscope was really powerful. But we too, didn't succeed to proof surface localization of the fusion protein by simply looking at the intrinsic fluorescence of the YFP, because the signal was to diffuse.
So we came up with an alternative strategy: Immunofluorescent assay using an anti-YFP antibody and visualizing it with an inverted microscope.
We did an immunofluorescent assay with an anti YFP antibody (Thanks Francesca Volpetti for giving us the antibody). In Figure 3 you can see the results we obtained with microscopy. The YFP signal (Figure 3 A) and the Cy5 signal (The antibody was tagged with NeutrAvidin DylLight Fluorescent Conjugate red, 650 nm from pierce) (Figure 3 B) superimpose nicely (Figure 3 C). Thus proofing that the fusion protein of INP and YFP is exported to the outer membrane.
Results
In the following section, you will find the results concerning our streptavidin cell surface display work.
Our first experimental steps were to perform Polymerase Chain Reactions (PCR) in order to isolate the different streptavidins.
Cloning
![](/wiki/images/d/d1/Team-EPF-Lausanne_ISX.jpg)
Gel B: 0.8% Gel electrophoresis to verify PCR of Streptavidin Dead coding sequence. Expected fragment size is 387bp and nothing in the reagent negative control
Gel C: 0.8% Gel electrophoresis to verify PCR of Streptavidin iGEM coding sequence. Expected fragment size is 387bp and nothing in the reagent negative control
The previous Gels show that our PCR reactions (68°C annealing temp, primers in registry) to amplify the streptavidin coding sequences went fine. The DNA fragments migrated at the expected sizes written under each images. The PCR to amplify our backbone (see primers in the registry) from the BBa_K523013 biobrick and to add overhangs complementary to the edges of the streptavidin sequences also worked.
With the PCR products we did a Gibson Assembly to obtained our desired constructs.
The Gibson Assembly reaction worked as expected, we obtained a product around the expected size 4171bp.
Then another way to verify that our Gibson assembly reaction had worked was to transform cells with the Gibson products. The transformed DH5α competent cells should be able to grow on an antibiotic medium because of the resistance provided in the plasmid. The only problem with this second verification is that the Gibson product could still contain parental plasmid, whose insertion in cells can also lead to cells resistance and survival. So to verify if there is a carry over of the initial plasmids, we made negative controls.
You can see bellow plates containing cells from the glycerol stocks we made of our gibson products .
As the other experiments did not provide informations about possible mutations, we also sent our constructs for sequencing, using VR and VF2 iGEM primers but also another forward primer we designed ourselves. The sequencing results were good, the protein is well inserted and there is no frame shift. You can see the sequencing results using the following iGEM registry links: results_ISA ; results_ISD ;results_ISI .
So up to now, with the previous informations we had on our constructs, we could simply conclude that our basic cloning strategy worked.
Then moving on, we needed to test if the protein was expressed, if it was well localised at the outer membrane and that it was functional.
We thus designed immunostaining assays to verify localisation at the outer membrane and biotin-staining assay for the protein functionality (see protocols).
Then we visualized the samples using a NIKON Eclipse TI inverted microscope [http://en.wikipedia.org/wiki/Inverted_microscope] and also a Confocal microscope [http://en.wikipedia.org/wiki/Confocal_microscopy], which is one of the most powerful microscopes nowadays.
Unfortunately for all these assays, we didn't have an appropriate positive control as our constructs were newly designed by ourselves.
Confocal Microscopy
Focusing on the biotin assays, we did the confocal experiment to better characterize this observed phenomena. You can observe the results below (Figure 1 to 4).
With the confocal microscopy, we were not able to distinguish weather the biotin molecules were inside or on the outside of the cells. And also we can see that some cells in the negative control are fluorescent. But these results were promising so we decided to repeat the experiments, trying to optimize the biotin staining protocols we were using.
Inverted Microscopy
The four following images represent only the construct ISA. You can observe the bright field images followed by their corresponding composite images (bright field file merged with fluorescent file).
You can observe localized specks on the cells surface. As expected, this pattern corresponds to the one we had while characterizing the INP_YFP fusion protein.
The next images show the competent cells we use as negative controls, in the same conditions as explained above.
It was not expected to find a pattern similar to the one found in the cells transformed with our constructs.
The next images corresponds to the two other constructs ISD and ISI. The cells look exactly like the ISA cells of Figures 1 and 2.
We thus decided to incubate ISA, ISD, ISI cells and competent cells with the some biotinylated nanoparticles conjugated with TexRed reporter.
This time again you can observe in the following pictures, nanoparticles (red) and cells, but we cannot tell if they are attached or not.
With the previous results we cannot make a conclusion on the functionnality and localisation of our fusion proteins.
We also did immunostaining assays, consisting in incubating the cells with FITC fluorescent antibody but we didn't have a fluorescent signal.
With all this even if we know that our cloning strategy was good, we cannot really conclude anything about the protein's expression and fonctionnality.
Growth curve and Western Blot
Finally we did a Western Blot and growth curve of our transformed cells to at least prove that our protein is indeed expressed.
We did a western blot expecting a signal at the ~50kDa bands corresponding to our protein. For this experiment we used a FITC conjugated, anti-streptavidin polyclonal Antibody. Despite the gel quality, you can see in the following picture a band of the desired size.
Finally we did a growth curve of the cells containing our constructs. For this last experiment, the cells were inoculated overnigth with 1mM IPTG. In the morning they were ininitially diluted to a certain OD and then the OD was regularly measured. We can see that the insertion of our plasmid affects the growth of E. coli cells.
Discussion
Our idea was to clone a fusion protein made of INP and Streptavidin that will be able to target streptavidin at the cell surface. This streptavidin could then further be used to attached biotinylated nanoparticules to the cells. We thus designed assays to clone this fusion protein and verify its functionality and localization. For the biotin assay, we were expecting ISA, ISI cells to bind biotin and ISD, competent cells to not bind it. We had the right patterns for ISA and ISI. We thus though that we had things working, but by repeating experiments several times and looking carefully at the competent and the ISD cells we found fluorescent cells also having the same characteristics as the ISA and ISI cells, which is unfortunately a contradictory result. We also had our immunostaining experiments that didn’t work, but the western blot results were positive.
So knowing that we did all this very carefully with a strict scientific approach we came to the conclusion that our protein is expressed but might be localised inside the cells. It could be that it is not well folded preventing the fusion product to behave exactly like BBa_K523013 protein.
Here is the nomenclature we will further use:
1)Initially used plasmid:
INP_EYFP Biobrick: BBa_523013
Streptavidin Alive: BBa_K1111010
Streptavidin Dead: BBa_K1111011
Streptavidin iGEM: BBa_K283010.
2) PCR reactions products
INP_construct = BBa_K523013 after PCR without EYFP
SA = Streptavidin Alive; SD = Streptavidin Dead
SI = Streptavidin iGEM.
3) Gibson reaction product names:
ISA = INP_Streptavidin Alive gibson product BBa_K1111012
ISD = INP_Streptavidin Dead gibson productBBa_K1111013
ISI = INP_Streptavidin iGEM BBa_K283010 gibson productBBa_K1111014
To learn more about how we would continue, see Next Steps or Perspectives
References
[1] Surface display of Zymomonas mobilis levansucrase by using the ice-nucleation protein of Pseudomonas syringae, Jung HC, Lebeault JM, Pan JG. (1998)
[2] Identification and purification of a bacterial ice-nucleation protein, Wolber PK, Deininger CA, Southworth MW, Vanderkerckhove J, van Montagu M and Warren GJ (1986)
[3] Laboratory of Mark Howarth at Oxford university Department of Biochemistry, for providing us with the cloning plasmids for Streptavidin.
[4] Clustering of ice nucleation protein correlates with ice nucleation activity, Mueller GM, Wolber PK, Warren GJ. (1990)