Team:EPF Lausanne/Sensing-Effector

From 2013.igem.org

Revision as of 19:41, 4 October 2013 by Leabernier (Talk | contribs)

Taxi.Coli: Smart Drug Delivery iGEM EPFL

Header

Contents

Sensing

Overview

The idea of this module was to transform bacteria with a plasmid that contains a promoter which senses a specific signal. Once this promoter senses the signal, it would initiate transcription of an enzyme which degrades the nanoparticle, thus releasing its contents. We decided to use pH as the specific trigger that activates the promoter. As a proof of principle, we inserted three different promoters into three plasmids in front of the BioBrick BBa_I746916 ([http://parts.igem.org/Part:BBa_I746908 BBa_I746916, Main Page]) which encodes superfolded GFP. Then, we transformed cells with these plasmids and let them grow in media with different pHs in order to check the expression.

Figure 1: A Graphical summary of what the sensing module contained. Each promoter was inserted into the same plasmid in front of GFP

Experiments

We chose the following three pH sensitive promoters:
1.) Hya-promoter, isolated from the Escherichia Coli K-12 MG1655 strain [http://parts.igem.org/Part:BBa_K1111002 BBa_K1111002]
2.) Cad-promoter, isolated from the Escherichia Coli K-12 MG1655 strain [http://parts.igem.org/Part:BBa_K1111004 BBa_K1111004]
3.) BioBrick BBa_J23119, a constitutive promoter that was made by the 2006 Berkley team. [http://parts.igem.org/Part:BBa_K1111005 BBa_K1111005]

Promoter Sequences


Figure 2: Sequence of the Hya promoter
Figure 3: Sequence of the Cad promoter
Figure 4: Sequence of the constitutive promoter BBa_J23119

Restriction Digest

We digested the plasmid containing the biobrick BBa_I746908 ([http://parts.igem.org/Part:BBa_I746908 BBa_I746908]) which would serve as backbone for our constructs.


Figure 5: 0,8% Gel, Restriction digest of the BioBrick BBa_I74608 with BamHI

PCRs and Gibson Assemblies

All the promoters were isolated by PCR and then assembled into the pSB1C3 Plasmid in front of the superfolded GFP.


Figure 6: 0.8% Gel, PCRs of the three backbones
Figure 7: 0.8% Gel, PCRs of the Hya and the Cad promoter
Figure 8: 2% Gel, PCR of the constitutive promoter BBa_J23119



















Then, each of the constructs was used to transform DH5-alpha competent cells, which were first plated on chloramphenicol containing LB agar plates for selection of positive transformants, and then incubated into media with different pHs.

We used four media:
1.) LB-Chloramphenicol with a final pH of 5 (Adjusted with 10X MOPS+HCl)
2.) LB-Chloramphenicol with a final pH of 6 (Adjusted with 10X MOPS)
3.) LB-Chloramphenicol with a final pH of 7 (Adjusted with water)
4.) LB-Chloramphenicol with a final pH of 8.5 (with 10X HEPES)

For each medium, we measured the OD of the cells. This helped us establish whether a low expression of GFP was really due to the fact that the promoters did not work, or simply resulting from the cells dying before they could initiate transcription and translation of the protein. It would also tell us whether an increase of fluorescence was only due to an accumulation of bacteria or to the actual accumulation of GFP.

OD measurements

Figure 9: OD measurements of Bacteria with the hya promoter in different media
Figure 10: OD measurements of Bacteria with the cad promoter in different media
Figure 11: OD measurements of Bacteria with the constitutive promoter in different media














GFP expression was measured using a plate reader. We made three replicates for each promoter with each pH. Both the fluorescence and the 1:600 absorbance were measured, in order to normalize the obtained fluorescence. Then, the average for each replicate was calculated and used to establish a curve depicting GFP expression within each medium.

GFP Measurements

Hya Promoter

Figure 12: Normalized Fluorescence at pH 5.5
Figure 13: Normalized Fluorescence at pH 6.5
Figure 14: Normalized Fluorescence at pH 7.0
Figure 15: Normalized Fluorescence at pH 8.5




















Cad Promoter

Figure 16: Normalized Fluorescence at pH 5.5
Figure 17: Normalized Fluorescence at pH 6.5
Figure 18: Normalized Fluorescence at pH 7.0
Figure 19: Normalized Fluorescence at pH 8.5




















Constitutive Promoter

Figure 20: Normalized Fluorescence at pH 5.5
Figure 21: Normalized Fluorescence at pH 6.5
Figure 22: Normalized Fluorescence at pH 7.0
Figure 23: Normalized Fluorescence at pH 8.5





















Microscopy

The Cells were also looked at under a microscope to qualitatively study their GFP expression.

Hya Promoter

Figure 24: FRAC_image, exposure: 400ms, Multiplier 1, pH 6.5
Figure 25: FRAC_image, exposure: 400ms, Multiplier 1, pH 8.5
Figure 26: FRAC_image, exposure: 550ms, Multiplier 1, pH 7


















Cad Promoter

Figure 27: FRAC_image, exposure: 400ms, Multiplier 50, pH 6.5
Figure 28: FRAC_image, exposure: 400ms, Multiplier 50, pH 8.5
Figure 29: FRAC_image, exposure: 400ms, Multiplier 50, pH 7


















Constitutive Promoter (Positive Control)

Figure 30:FRAC_image, exposure: 400ms, Multiplier 1, pH 6.5
Figure 31: FRAC_image, exposure: 400ms, Multiplier 1, pH 8.5
Figure 32: FRAC_image, exposure: 400ms, Multiplier 1, pH 7















Note
We overexposed some of the images to be sure that there was no fluorescence in the bacteria in these media.

Expected outcome

The promoters Hya and Cad were supposed to initiate transcription upon external acidification, which would then cause the bacteria to express superfolded GFP and turn bright green. The biobrick BBa_J23119, being a constitutive promoter, would turn the bacteria green independently of their medium. For our project, the promoters were inserted in front of a gelatinase so that the latter would be expressed upon arrival in an acidic medium. The bacterium would then secrete the gelatinase causing the degradation of the naonoparticle and the release of its contents.

Results

We successfully managed to PCR amplify each of the three promoters as well as to insert them by Gibson Assembly into the pSB1C3 plasmid so that they would control the expression of superfolded GFP. These assemblies were all successful, which was determined by sequencing the plasmid isolated from the positive transformants on the plate. This sequencing result showed a 100% match between the reference promoter sequence and the inserted sequence that the bacteria contained. Also, the bacteria containing the biobrick promoter turned green on the plates as well as in liquid culture, as expected.

Discussion

GFP expression under the hya and the cad promoters
From the measurements we made on the plate reader, we were not able to conclude whether the promoters are really induced at low pH as the cells died very quickly. This was also supported by the OD measurements we took. On those graphs one can see very clearly that the cells which are in the acidic media die almost immediately. Furthermore, there was some expression in both the neutral and the basic medium. This would indicate that the promoter is either a constitutive promoter or that it is inducible but leaky.
Comparing these graphs with the microscopy pictures, one cannot say conclusively that the promoter is inducible by pH. Even though under the microscope there are only fluorescent bacteria at acidic pH, the results from the plate reader clearly indicate that there are also fluorescent bacteria at neutral and high pH. However, one can see a trend that for both the hya and the cad promoter, the fluorescence is strongest at acidic pH and weakest at basic pH under the microscope. This trend cannot be seen in the Plate Reader measurements, as the bacteria at low pH die before being able to express GFP.
Using the constitutive promoter as a positive control one can see that both hya and cad are weak promoters, as the fluorescence in the bacteria with the constitutive promoter is much stronger in acidic, neutral and basic media than the fluorescence in bacteria containing the hya or the cad promoter. Furthermore, a comparison with the constitutive promoter again supports the hypothesis that the bacteria grow best at neutral pH, as there are much more bacteria at pH 7 and at pH 6.5 or 8.5.

Conclusion
Thus, we can conclude that the hya promoter and the cad promoter work, in the sense that they in fact induce expression of GFP. But from our data, we were not able to conclusively say that they are inducible by low pH. Nevertheless, we were able to show that they are weak promoters that can be used to express a protein that should be present at low concentrations.

With respect to our project
In order to be sure that hya and cad are induced only at low pH, we would need to do further testing. As soon as their inducibility would be confirmed, we would insert them by gibson assemly in front of either GelE gelatinase or MMP2 gelatinase. Upon arrival in a medium with pH below 7 the enzyme would be synthesized and released.



References:

[http://jb.asm.org/content/181/17/5250.full [1]] Journal of Bacteriology
Response of hya Expression to External pH in Escherichia coli
Paul W. King and Alan E. Przybyla
J.Bacteriol. 1990

[http://jb.asm.org/content/173/15/4851.abstract?sid=2a119bc7-0c26-4543-a671-d3a50521253f [2]] Journal of Bacteriology
Mutational analysis and charecterization of the Escherichia coli hya operin, which encodes [NiFe] hydrogenase1
N K Menon, J Robbins, J C Wendt, K T Shanmuagam and A E Przybyla
J. Bacteriol 1991

[http://jb.asm.org/content/174/8/2659.short [3]] Journal of Bacteriology
Nucleotode Sequence of the Escherichiea coli cad Operon: a system for neutralization of Low Extracellular pH
Shi-Yuan meng and George N. Bennett
J. Bacteriol 1992

[http://jb.asm.org/content/174/8/2670.short [4]] Journal of Bacteriology
Regulation of the Escherichia coli cad Operon: Location of a Site Required for Acid Induction
Shi-Yuan meng and George N. Bennett
J. Bacteriol 1992

Effecting

Overview

The goal of the effecting part of the project was to build a plasmid containing an arabinose-inducible promoter driving a tagged enzyme able to cleave gelatin, the polymer used to build our nanoparticles. We chose three different enzymes that would be inserted in part BBa_I746908(a pBAD promoter driving superfolded GFP, [http://parts.igem.org/Part:BBa_I746908 [registry page]]) either between the promoter and GFP reporter or replacing the GFP, since having such a reporter at the end of a protein sometimes causes folding troubles. All of the constructs were designed to have a His tag in addition so we could extract and purify our expressed protein.
The final desired result was bacteria transformed with the plasmid which secreted our gelatin-degrading protein upon the addition of arabinose to the culture medium and/or glowed green (in the case where we left GFP in the plasmid)

Strategy

The strategy we decided to go for to build our plasmids was the Gibson assembly technique. To perform this technique, complementary overlaps must first be added at the 5' and 3' ends of both our insert (GelE, MMP2 or MMP9 in this case) and backbone (BBa_I746908). These complementary overlaps then bind together, inserting the insert at the desired position in the backbone. To do so, we planned to do PCR reactions whose primers contained: the overlap, a His tag and a part of the protein CDS for the inserts and the overlap and a part of the backbone CDS for the backbone. The final plasmids would have pBAD/araC-START-Histag-ProteinCDS-STOP or pBAD/araC-START-Histag-ProteinCDS-linker-GFP-STOP as a part. The primers for the constructs that worked are listed in the "Reference & Information" paragraph.

Figure 33: Gibson assembly: Protein without GFP
Figure 34: Gibson assembly: Protein with GFP

















Experiments

The three different enzymes that we chose to use were gelatinase E (gelE) from Gram positive bacterium E.faecalis ([http://www.example.com NCBI page]), metalloprotease 2 (MMP2) from H. sapiens ([http://plasmid.med.harvard.edu/PLASMID/GetCloneDetail.do?cloneid=2849&species=Homo%20sapiens reference]) and metalloprotease 9 (MMP9) from M. musculus. We ordered the genomic DNA of E.faecalis as well as two plasmids containing the CDSs of MMP2 and MMP9 from plasmid.med.harvard.edu.

PCR
We first amplified the CDS of our three proteins by PCR, using the primers described in the "Strategy" paragraph. The expected weights for our products were: 1,5 kb for the GelE insert, 2 kb for the MMP2 and MMP9 inserts, 3.2 for the backbone without GFP and 4.2 kb for the backbone still containing GFP. The PCRs for the backbones having the GFP removed did unfortunately not work, so we had to leave the three constructs that needed them behind.

Figure 35: PCR: GelE insert
Figure 36: PCR: GelE backbone
Figure 37: PCR: MMP2 insert























Figure 38: PCR: MMP2 & MMP9 backbones
Figure 39: PCR: MMP9 insert




















Then, we proceeded to a PCR purification.

Gibson Assembly
The next step was the Gibson assembly reaction which would put together the inserts and their corresponding backbones, thus assembling our constructs. The reaction was performed only for the constructs that were built to have the GFP reporter in the plasmid, the three other constructs being left aside due to a PCR issue.
The assembly worked for both the GelE-GFP and MMP2-GFP constructs, but not for MMP9.
The expected weights of the constructs were of 5.7 kb for the GelE-GFP and 6.2 kb for the MMP2-GFP. The band at 6 kb is clear for the MMP2-GFP construct, but the one at 5.7 isn't really visible for the GelE-GFP construct. We would be able to check for the presence of both constructs at the next step, after the minipreps were done.

Figure 40: Gibson Assembly: GelE-GFP construct
Figure 41: Gibson Assembly: MMP2-GFP construct























Transformation and sequencing
We then transformed bacteria with the plasmids, isolated them and sent the minipreps for sequencing. The sequencing revealed the presence of an unexpected STOP codon just before the start of the GFP sequence. We still performed the glowing assay by adding 50ul of 20% arabinose to the 5ml culture medium in which we had grown the transformed bacteria overnight but the result came out negative.
The minipreps show the presence of the two expected constructs at 5.7 kb and 6.2 kb, repectively.

Figure 42: Minipreps: GelE-GFP and MMP2-GFP constructs












Western Blot
The next assay to test the expression and secretion of our fusion proteins was a Western Blot, performed on the medium and cell lysate fractions of our liquid cell culture. The antibody used to detect our protein was an anti-His tag antibody, which was supposed to detect the his tag that had been added to the CDS of our fusion proteins. This assay unfortunately also came out negative. Also, we were unable to check for the presence of the His tag with the sequencing because the primers we used to do it were the same as for the Gibson. Thus, the sequencing starts a bit downstream of the primers, not sequencing them. However, their sequence was correct when we checked the order we had made.

Figure 43: GelE sequencing overlaps
Figure 44: MMP2 sequencing overlaps











His-tag purification and SDS-PAGE
A His tag purification method under native conditions using a Ni-NTA spin kit was performed. The native conditions were chosen because we wanted to perform a digestion assay with the purified protein on the nanoparticles to assess their digestion capacities. The lysates, flow-through, wash and final eluate (supposed to contain the purified protein) were kept and analysed with a NanoDrop before being used for an SDS-PAGE. The NanoDrop revealed that the eluates contained no protein, but that the wash fraction contained about 0.4 mg/ml of protein. The two possible reasons for this were: 1) the His tag was not properly added to the protein CDS (PCR mutation, ...) or 2) the His tag was hidden in the protein structure and could not bind to the column since the purification was done under native conditions. Therefore, the SDS-PAGE could reveal the presence of our protein by comparing the SDS-PAGE results of the protein from the arabinose-induced cell culture and those from the un-induced cells (negative control). Unfortunately, the experiment did not work due to a Coomassie stain issue: nothing could be visualized.

Discussion and Future

We unfortunately could not come to a satisfying final result in the effecting part of the project because we could not prove that the plasmids actually conferred to the bacteria the ability to secrete a gelatin-degrading protein. We can later perform the digestion assay with the wash fraction of the Ni-NTA purification to see whether a gelatin-degrading protein is indeed present in it. Also, the next experiment would be to redo the SDS-PAGE on the remaining of the Ni-NTA purification.

References & Information

GelE-GFP insert forward primer: 5'-ATG CACCACCACCACCACCAC AAG GGA AAT AAA ATT TTA TAC CAT TTT A-3'
GelE-GFP insert reverse primer: 5'-ACC ACC AGA TTG AAA ATA CAA ATT TTC ACC TTC ATT GAC CAG AAC AGA TTC-3'
BBa_I746908 backbone forward primer: 5'-GGT GAA AAT TTG TAT TTT CAA TCT GGT GGT GAT GCG TAA AGG CGA AGA GCT-3'
BBa_I746908 backbone reverse primer: 5'-ATT TCC CTT GTG GTG GTG GTG GTG GTG CAT TAG TAT TTC TCC TCT TTC TCT AGT AGC TAG-3'

MMP2-GFP insert forward primer: 5'-ATG CACCACCACCACCACCAC GAG GCG CTA ATG GCC C-3'
MMP2-GFP insert reverse primer: 5'-ACC ACC AGA TTG AAA ATA CAA ATT TTC ACC GCA GCC TAG CCA GTC GGA TTT GAT-3'
BBa_I746908 backbone forward primer: 5'-GGT GAA AAT TTG TAT TTT CAA TCT GGT GGT GAT GCG TAA AGG CGA AGA GCT-3'
BBa_I746908 backbone reverse primer: 5'-TAG CGC CTC GTG GTG GTG GTG GTG GTG CAT TAG TAT TTC TCC TCT TTC TCT AGT AGC TAG-3'