Team:Imperial College/Protocols

From 2013.igem.org

(Difference between revisions)
Line 53: Line 53:
https://static.igem.org/mediawiki/parts/e/e3/3HB_kit_assay.png
https://static.igem.org/mediawiki/parts/e/e3/3HB_kit_assay.png
-
<p> We have carried out two experiments with the kit. One to detech 3HB from PHB producing cells and one to detect 3HB monomers from the phaZ1 teated PHB samples.</p.
+
 
-
<h5>3HB from cells</h5>
+
<h5>sample preparation: 3HB from PHB</h5>
-
<p>sample 1: We grow [http://parts.igem.org/Part:BBa_K1149051 hybrid phaCAB] MG1655 cells overnight, centrifuge them, resuspend in Assay Buffer, sonicate at (?? pulse?) to lyse the cells, centrifuge and use different dilutions of the supernatant.</p>
+
<p>samples: We treat PHB purified from various experiments with 10uL of [http://parts.igem.org/Part:BBa_K1149010 phaZ1] enzyme in 800uL tris buffer. The next day, we heat sample up to 90°C to inactivate the phaZ1 enzyme, centrifuge and use the supernatant in different dilutions with Assay Buffer. (90%, 50%, 10%)</p>
-
<p>control 1: We grow Empty Vector MG1655 cells overnight (negative control), centrifuge them, resuspend in Assay Buffer, sonicate at (?? pulse?) to lyse the cells, centrifuge and use different dilutions of the supernatant. (100%, 20%, 1%)</p>
+
<p>1: bioplastic made by [http://parts.igem.org/Part:BBa_K1149051 hybrid phaCAB] grown on 3% glucose LB
-
<h5>3HB from PHB</h5>
+
<p>2:"the grey stuff that is directly from waste". </p>  
-
<p>sample 2, 3: We treat PHB purified from various experiments with [http://parts.igem.org/Part:BBa_K1149010 phaZ1] enzyme. 1: bioplastic made by [http://parts.igem.org/Part:BBa_K1149051 hybrid phaCAB] grown on 3% glucose LB, 2:"the grey stuff that is directly from waste". The next day, we heat sample up to 90°C to inactivate the phaZ1 enzyme, centrifuge and use the supernatant in different dilutions. (100%, 20%, 1%)</p>
+
<p>control 2: We treat 0.3 grams of PHB purchased from sigma (positive control) for our experiments. The next day, we heat sample up to 90°C to inactivate the phaZ1 enzyme, centrifuge and use the supernatant in different dilutions. (100%, 20%, 1%)</p>
<p>control 2: We treat 0.3 grams of PHB purchased from sigma (positive control) for our experiments. The next day, we heat sample up to 90°C to inactivate the phaZ1 enzyme, centrifuge and use the supernatant in different dilutions. (100%, 20%, 1%)</p>

Revision as of 18:34, 30 September 2013

Contents

Materials

Waste Conditioned Media (WCM)

We added 1g [http://en.wikipedia.org/wiki/Refuse-derived_fuel SRF] (Solid Recovered Fuel) /50 mL LB and then autoclaved the mixture. Once autoclaved, large waste chunks were removed through filter sterilisation (0.2 µm filters) before being used in growth assays as waste conditioned media (WCM). SRF refers to the refuse from recycling facilities that has no value currently and is incinerated to produce power at a cost to the recycling facility, it is composed of 30% plastics while the rest is cellulosic waste

3% glucose Nile Red plates

When making up LB agar media, add 3% glucose then autoclave. When autoclaving it is essential that you keep temperature <125°C. Failure to do so will result in caramelisation (160°C) of the media, which will show as a darkening of the media. With this complete, 60 µL Nile Red was added in addition to 150 µL chloramphenicol in a 300 mL final volume. Plates were then poured and left to dry. Another successful mechanism to thwart caramelisation is to autoclave the LB-agar then add the 3% glucose after. Follow this with a 30 second microwave step and then an 80°C water bath for a couple hours to thoroughly sterilise.

M9 minimal and supplemented media

First made stocks of MgSO4 (246.48 g/mol), CaCl2 (147.02 g/mol), and thiamine hydrochloride (337.3 g/mol): MgSO4: 100 mM - 2.46g in 100 mL ddH2O CaCl2: 20 mM - 0.29g in 100 mL ddH2O Thiamine hydrochloride: 50 mM - 0.84g in 50 mL ddH2O The bottles used were pre-autoclaved. When all media was prepared, it was sterile filtrated, as autoclaving results in the formation of magnesium precipitate. See below for correct volumes and mass to add where [final] represents desired values.
M9 table.PNG

Xylose and Arabinose

For induction assays, 2% xylose was prepared, as was 6 µM arabinose.


Protocols and Assays

P3HB production and extraction

Extracting PHB

  • Centrifuge settings: 4000RPM, 10mins.
  • Scale as appropriate.
  • After each centrifuge step the supernatant should be poured off.
  • This should provide PHB with 99% purity and a high molecular weight.
  1. Centrifuge 50ml culture and resuspend in PBS.
  2. Resuspend pellet in 5ml Triton X-100(1% v/v in PBS) for 30mins at room temp.
  3. Centrifuge, resuspend in 5ml PBS.
  4. Centrifuge, add 5ml sodium hyperchlorite solution and incubate at 30˚C for 1 hour.
  5. Centrifuge, wash with 5ml distilled water and 70% EtOH several times.
  6. Allow powder to dry.

3HB assay

We are hydroxybutyrate colorimetric assay kit. You can download the description of the product and the protocol here. The chemical reaction behind the assay is illustrated on the image below:

3HB_kit_assay.png


sample preparation: 3HB from PHB

samples: We treat PHB purified from various experiments with 10uL of [http://parts.igem.org/Part:BBa_K1149010 phaZ1] enzyme in 800uL tris buffer. The next day, we heat sample up to 90°C to inactivate the phaZ1 enzyme, centrifuge and use the supernatant in different dilutions with Assay Buffer. (90%, 50%, 10%)

1: bioplastic made by [http://parts.igem.org/Part:BBa_K1149051 hybrid phaCAB] grown on 3% glucose LB <p>2:"the grey stuff that is directly from waste".

control 2: We treat 0.3 grams of PHB purchased from sigma (positive control) for our experiments. The next day, we heat sample up to 90°C to inactivate the phaZ1 enzyme, centrifuge and use the supernatant in different dilutions. (100%, 20%, 1%)

control 3: P(3HB) from Sigma untreated, to determine signal from P(3HB)

control 4: P(3HB) purified from hybrid promoter-phaCAB transformed MG1655

We do all samples in the wells (96 well place) in triplicates. We took extra care with pipetting accurately, equilibrated the tip and used an eppendorf multi-dispenser electronic pipette. Measurements were done at 25°C in plate reader.

Cloning

PCR

We used Pfu Ultra polymerase for all reactions where we use the DNA for anything afterwards. Download the exact manual from here

We used MyTaq polymerase for colony PCR and checking plasmids. You can download the manual [http://www.bioline.com/documents/product_inserts/MyTaq%E2%84%A2%20DNA%20Polymerase.pdf#zoom=130 here].

Our super Thermal Cycler was provided by our generous sponsor, Eppendorf.

Running gels

We used SybrSafe to stain the DNA and imaged in a Transilluminator. We cut out bands under a bluebox.

Minipreps

We did minipreps from 4mL overnight cultures in LB, supplemented with antibiotics.

Chlo: 50 mg/mL

Amp:100 mg/mL

Kan: 100 mg/mL

We used [http://www.qiagen.com/Products/Catalog/Sample-Technologies/DNA-Sample-Technologies/Plasmid-DNA/QIAprep-Spin-Miniprep-Kit Quiagen Miniprep kit].

We got a sweet tabletop centrifuge from dear Eppendorf company which served us really well.

Digests and Ligations

For restriction digests, we used NEB enzymes and used the companys protocols accordingly. For ligations, we used T4 ligase. We treated backbones with alkaline phosphatase before ligations and we have used Dpn1 treatment sometimes to degrade the original plasmid.

Sequencing

We used VF2, VR, G1004 and G1005 primers in order to verify the sequence of most of the biobrick parts. We also designed internal sequencing primers to verify the reads in long parts, such as phaCAB.

[http://parts.igem.org/Part:BBa_G00100 VF2 (BBa_G00100)] tgccacctgacgtctaagaa Tm=62 [http://parts.igem.org/Part:BBa_G00100 VR (BBa_G00101)] attaccgcctttgagtgagc Tm=60

[http://parts.igem.org/Part:BBa_G1004 BBa_G1004] (=prefix) gtttcttcgaattcgcggccgcttctag Tm=63 [http://parts.igem.org/Part:BBa_G1004 BBa_G1005] (=revcompl sufix) gtttcttcctgcagcggccgctactagta Tm=64

Transformation

We transformed our plasmids finally into MG1655.

For ligations we used mainly NEB10 and some TOP10 and NEB5 cells for high efficiency.


Waste Growth Assay

Overnight (O/N) cultures of MG1655 transformed with (BBa_K639003) were diluted to OD 0.05 in either fresh LB or waste conditioned media and plated into 96 well plates (200 µl/well). OD600 was read at the indicated time points and media only (LB) was taken away as background signal. In addition to this a qualitative assay as performed. 9 mL mCherry bacteria were transferred into 300 mL of autoclaved SRF in LB, which were placed in a shaking incubator at 37°C. After 2 days 200 µL of this solution was plated out on chloramphenicol plates, this was then repeated a week later to gauge whether or not the bacteria were still alive. To show that the MG1655 could grow on waste solely, they were grown in PBS (phosphate buffered saline) and autoclaved waste. In 100 mL PBS + waste, 1 mL MG1655 mCherry E.coli were added. They were then grown in a shaking incubator at 37°C and samples were plated after 2 days and 6 days.


Growth assays

3HB and Acetoacetate LB and M9 growth for P3HB synthesis

3HB solutions were prepared in advance. An initial stock of 100mM 3HB was made from 0.315g 3HB (FW:126) dissolved in 25 mL ddH2O. This was then diluted down to 10mM, 1mM, 100µM, 1µM working solutions in LB. Furthermore, 3% glucose in LB was prepared with solutions made from 3g glucose in 100 mL LB. O/N cultures were prepared, these were diluted to OD=0.05 by measuring O/N OD0.05. With this complete the required dilutions of cells were made into 1.5 mL reaction tubes to give a total volume of 800 µL, this was then divided up into 4 wells for quadruplicate technical repeats. Cells used were phaABC, which is involved in P3HB synthesis from glucose, phaBC which synthesises P3HB from acetoacetate and EV empty vector which was used as a growth control.
3HB table.PNG
With the plate loaded, it was then placed in a shaking incubator at 700 rpm, 37°C for 30 minutes. After this, we took readings using a robotic plate reader for t=0 at OD600, then repeated this over a further 7 hours. A second plate was prepared to measure acetoacetate as a sole carbon source. Lithium acetoacetate (FW: 108.02) was prepared by placing 10 mg in 9.2 mL water to give a stock concentration of acetoacetate of 10 mM. Dilutions were made to 100 µM and 1µM. Ethylene glycol growth assays were prepared by diluting 1.11 g/L stock solution by 1000 and 500 to give final concentration of 100 mM and 200 mM respectively. Emulsions were prepared as described below. These were further diluted from stock solutions of 1.25 g/L to working solutions of 31 mg/L and 31 µg/L.
Acetoacetate table.PNG


Preparation of Poly DEGA plates.

For 320 mL final media, place 1.5 mL 0.5% poly DEGA in 18.5 mL ddH20. As poly DEGA is very viscous, the 20 mL solution was sonicated for 45 minutes. This complete, it was added to LB agar kept at 70°C along with 25 ug/mL chloramphenicol. The solution was then separated into 3 separate duran bottles of 100 mL volume. 0.21g xylose was added to a bottle, 0.21g arabinose to another and the other did not have an inducer added. The media was then plated out.

Western blot

Sample preparation

Prepare concentrated induction media. (Dissolve 0.134g Arabinose in 8ml pre-sutoclaved LB, 1.52g xylose in 4ml pre-autoclaved LB). Filter sterile induction media.

Make 5 mL overnight culture from the transformed cells.

In the next morning, dilute 0.5 ml overnight culture in 9.5 ml of LB media. The subsequence inducer concentrations are 6mM arabinose and 2% xylose.

Then grow the diluted culture at 37°C, and measure OD600 every hour until the OD reaches 0.5-0.6.

Then induce protein expression with appropriate induction media, and grow the induced cells at 37°C for 5 hours.

Spin 2ml of induced cells, collect 60ul of the supernatant with a 1.5ml tube, and add 20 ul western loading buffer to the supernatant.

Resuspend the pellet with 100 ul of lysis buffer. Wait cell to lyse (15-20 minutes) at room temperature. Vortex is allowed.

Add 33 ul of western loading buffer to the lysate.

Boil the sample at 95°C for 5 minutes and freeze at -20°C.

Gel electrophoresis

Take 15ul of sample to each well. Run the gel at 60V for 1 hour and 20 minutes.

Transfer

Use [http://www.lifetechnologies.com/uk/en/home/life-science/protein-expression-and-analysis/western-blotting/western-blot-transfer/iblot-dry-blotting-system.html iBlot® Dry Blotting System (Invitrogen)] to perform dry blotting.

Antibody binding

All-in-one his antibody (from mouse) is used for proteins with his-tags. Primary and secondary Flag-antibodies are used for Flag-tagged proteins. Mix 7 ml of 5% w/v non-fat dry milk with diluted antibodies, and place the membrane in the mixture. Incubate for 1 hour at room temperature. Wash 210 min with 15 ml 0.05% PHB-Tween. Wash 25 min with 15 ml PBS.

Visualisation

Visualise the protein bands using [http://www.lifetechnologies.com/1/1/28062-novex-ap-mouse-chemiluminescent-detection-kit.html Chemiluminescence detection kit (Invitrogen)]. Protein-specific signal is then captured by a chemiluminescent-compatible X-ray film.





Our Sponsors

TueSponsorsEppendorf.png 125px Invitrogen.jpg Geneart.jpg CSynBI.JPG