Plaque Forming Assay Plux

1.Introduction

Our previous assay revealed that the M13 phage genes and the M13 origin worked together with the pSB origin. Next, we confirmed whether the release of the M13 phage particle depends on the induction of g2p expression. We inserted lux promoter (which is activated by LuxR-3OC6HSL complex) upstream of g2p, as an inducible promoter (Fig. 1). The method for our assay is briefly shown in Fig. 2. First, we cultured E. coli which is introduced our new part ([http://parts.igem.org/Part:BBa_K1139021 BBa_K1139021]), and added AHL, which induces the phage release. Second, we centrifuged the culture and obtained phage particles. Finally, we added the phage particles and lawn culture (E. coli containing pSB6A1-Ptet-luxR) to the soft agar, and poured it on a YT plate.

Fig. 1. Our plasmid construction

Fig. 2. How to perform our inducible phage release assay

2. Materials and Methods

2-1 Plasmid construction

pSB3K3-Plux-M13-Plac-GFP ([http://parts.igem.org/Part:BBa_K1139021 BBa_K1139021])

pSB6A1-Ptet-luxR

2-2 Strains

DH5alpha (E. coli of high competence)

JM109 (F+ strain E. coli)

2-3 Media

LB

Bacto tryptone	10 g/L
Yeast Extract	5 g/L
NaCl	10 g/L

YT soft agar

Bacto tryptone	8 g/L
Yeast Extract	5 g/L
NaCl	5 g/L
Agarose	6 g/L

YT plate

Bacto tryptone	8 g/L
Yeast Extract	5 g/L
NaCl	5 g/L
Agarose	15 g/L

2-4 Others

3OC6HSL dissolved in DMSO (>100 microM)

Autoclaved pieces of filter paper (about 1.5 cm in diameter)

2-5 Protocol

Preparation

1. Transform DH5alpha with pSB3K3-Plux-M13-Plac-GFP and pSB6A1-Ptet-luxR.

2. Prepare overnight cultures of the transformed DH5alpha and JM109, each in LB medium containing ampicillin (50 microg/mL) and kanamycin (30 microg/mL) at 37°C.

3. Take 30 microL of the overnight cultures into 3 mL LB medium containing ampicillin (50 microg/mL) and kanamycin (30 microg/mL) . (->fresh cultures)

4. Incubate the fresh cultures at 37°C for 2 h.

5. Add 3 microL of 5 microM 3OC6HSL in DMSO (final concentration of 5 nM) to the fresh cultures and incubate them at 37°C for 4 h.

6. Centrifuge the overnight cultures of the transformed DH5alpha at 9,000 g for 1 min.

7. Pipette the supernatant into a 1.5 mL tube.

8. Dilute it 100 times with water. (-> phage-particle-solution)

Plaque formation

9. Transform JM109 with pSB6A1-Ptet-luxR

10. Prepare overnight cultures of the transformed JM109 at 37°C.

11. Melt the YT soft agar using a microwave.

12. Add ampicillin to the YT soft agar.

13. Dispense 3.5 mL of the melted soft agar to a new round tube, and keep them at 50°C in an incubator.

14. Dispense 400 microL of the overnight cultures of the transformed JM109 to a 1.5 mL tube.

15. Into the 1.5 mL tube, add 100 microL of the phage-particle-solution.

16. Transfer all the content of the 1.5 mL tube to the dispensed soft agar, mix them, and spread all of it on a YT plate.

17. Wait for the YT soft agar to solidify at room temperature (for about 5 min.).

18. Put an autoclaved piece of filter paper on the plate, and drip 20 mL of 3OC6HSL in DMSO (100 microM, 5 microM or DMSO only) into the piece of filter paper.

3. Result

The result of the plaque forming assay is shown in Fig 3. On the plate, the plaques were formed at some distance from the piece of filter paper. The result shows that the phage release is regulated by the induction of 3OC6HSL. We also analyzed the distribution of the plaques (Fig. 4). The histogram result implicates that the plaques are formed only at the appropriate concentration of 3OC6HSL in the medium (Fig 5.). In the neighborhood of the piece of filter paper, the expression of g2p is so activated that the phage particles cannot be produced efficiently, because the production of the single stranded DNA largely exceeds that of the coat proteins, and vice versa.

Fig. 3. The plaques formed with 3OC6HSL induction (plaque plotted)

The plaques were formed using the JM109 (with pSB6A1-Ptet-luxR) overnight cultures and the phage-particle-solution. The phage particles were obtained from the supernatant of the fresh cultures (+3OC6HSL) of transformed DH5alpha (with pSB3K3-Plux-M13). A mixture of 3.5 mL YT soft agar, 100 microL of X 100 supernatant and 400 microL of the overnight cultures of JM109 (with pSB6A1-Ptet-luxR) was poured on a YT plate. After solidifying the soft agar, we put a piece of filter paper on the plate and dripped 3OC6HSL in DMSO (or DMSO only) on the piece of filter paper.

Fig. 4. The analysis of distribution of the plaques

We totalize the distances from the center of the piece of filter paper to each plaque, by using ImageJ.

Fig. 5. The distribution histogram of the plaques

This histogram shows distance from the piece of paper in a horizontal axis, and shows number of plaques over distance squared, which means the rate of plaque formation, in a vertical axis. The bin range is 0.2 cm.