From 2013.igem.org

Revision as of 18:37, 30 September 2013 by Jps09 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Growth and Toxicity Assays

This page includes all of our experimental growth, toxicity and sole carbon source assay data.

Growth assays with different experimental media

In additional to standard LB and minimal media, several novel experimental media were developed in order to characterise Biobricks within a mixed waste/landfill setting. These media were characterised through an examination of pH and through an array of growth assays with the project chassis, E.coli (MG1655).

Media characterisation. E. coli strain MG1655 were transformed with a control plasmid and grown in different experimental media over a period of 5 hours. LB media, minimal media (M9M), supplemented minimal media (M9S), as described here or waste conditioned media (WCM), which is made from sterile filtrated mixed waste, see here. OD600 measured, error bars are S.E.M., n=4.	pH of experimental media. pH measurements of experimental media were made both before and after several experiments. The time periods refer to the duration MG1655 transformed E. coli were cultured in the media before a pH measurement was made.

Conclusion: MG1655 E. coli are viable and grow in all of our experimental medias. We have established a novel media that is optimised for characterisation of biobricks within a mixed waste/landfill context.

Long term waste growth assays

These assays were designed to test whether our chassis, E. coli (MG1655) could grow directly with waste over a long period of time.

Waste media

LB-waste assay(A) Waste media(B) Ecoli containing mCherry stress biosensor (BBa_K639003) were grown in mixed waste (A) over 3 days, then streaked in a qualitative assay to check for growth. (C) mCherry stress biosensor (BBa_K639003) transformed Ecoli were streaked again after 7 days growth in SRF.	PBS-waste assay(A) waste media made up in PBS (phosphate buffered saline). (B) E coli expressing mCherry stress biosensor (BBa_K639003) grown in waste media (A) over 3 days, then streaked onto an antibiotic containing plate to qualitatively assess whether the E. coli had survived. (C) Streaked again after 6 days growth in SRF.

Conclusion: MG1655 E. coli are viable and grow on mixed waste alone. Therefore we have established that our chassis could survive in a mixed waste bio-reactor context, which is validation of our concept to industrially implement our system.

Waste conditioned media

These assays were designed to test whether our chassis, E. coli (MG1655) could grow with waste conditioned media (WCM) over a period of 24-48 hours. Waste conditioned media is a filter sterilised version of the waste media and was designed for several reasons; Firstly we were unsure whether mixed waste would be toxic to Ecoli and hence a less concentrated version may be more suitable and secondly large chunks of waste would prevent accurate OD600 measurements and therefore we decided to filter out the largest chunks.

Growth assay in waste conditioned media (WCM). E. coli (MG1655) transformed with [http://parts.igem.org/Part:BBa_K639003 mCherry stress biosensor.] were grown with LB-based waste conditioned media at 37ºC, with shaking. Error bars represent S.E.M., n=4	Photograph of waste conditioned media cultures mCherry stress biosensor (BBa_K639003) transformed MG1655 were grown with LB-WCM at 37oC, with shaking for 48 hours. Growth assay in waste conditioned media (WCM). E. coli (MG1655) transformed with either empty vector control (EV) or mCherry stress biosensor (BBa_K639003) were grown in WCM for 5 hours, with shaking at 37oC. Error bars are SEM, n=4.

Conclusion: MG1655 transformed with either empty vector (EV) control or mCherry stress biosensor (BBa_K639003) vector are viable and can grow in waste conditioned media. Therefore waste conditioned media is an appropriate and novel experimental media with which to characterise biobricks within a mixed waste/landfill context. These data are also characterisation of an existing biobrick (BBa_K639003)

Growth and induction assays of our Biobricks

Growth and induction assays of our project biobricks. Several of our constructs contain sfGFP within an operon and therefore fluorescence can be utilised to determine if expression is being induced by either addition of Arabinose or Xylose as appropriate to the construct.

Bdh2 with pelB secretion tag growth assay E. coli (MG1655) transformed with pelB-bdh2 (BBa_K1149013) were grown with either 0uM or 6uM Arabinose to induce bdh2 and sfGFP expression. Growth was at 37oC with shaking. Error bars are SEM, n=4.	Bdh2 with pelB secretion tag induction assay E. coli (MG1655) transformed with pelB-bdh2 (BBa_K1149013) were grown with either 0uM or 6uM Arabinose to induce bdh2 and sfGFP expression. Growth was at 37oC with shaking. Error bars are SEM, n=4.
Bdh2 with no pelB secretion tag growth assay E. c	Bdh2 with no pelB secretion tag induction assay E. c
CLE growth assay E. coli (MG1655) transformed with CLE (BBa_K1149009) were grown with either 0% or 2% Xylose to induce CLE and sfGFP expression. Growth was at 37oC with shaking. Error bars are SEM, n=4.	CLE induction assay E. coli (MG1655) transformed with CLE (BBa_K1149009) were grown with either 0% or 2% Xylose to induce CLE and sfGFP expression. Growth was at 37oC with shaking. Error bars are SEM, n=4.
ETSCS2 growth assay E. coli (MG1655) transformed with ESTCS2 (BBa_K1149002) were grown with either 0uM or 6uM Arabinose to induce ESTC2 and sfGFP expression. Growth was at 37oC with shaking. Error bars are SEM, n=4.	ETSCS2 induction assay E. coli (MG1655) transformed with ESTCS2 (BBa_K1149002) were grown with either 0uM or 6uM Arabinose to induce ESTC2 and sfGFP expression. Growth was at 37oC with shaking. Error bars are SEM, n=4.
PueA growth assay E.	PueB growth assay E. coli (MG1655) transformed with PueB (BBa_K1149004) were grown with either 0% or 2% Xylose to induce PueB expression. Growth was at 37oC with shaking. Error bars are SEM, n=4.
Phaz1 growth assay E. c	PulA growth assay E. coli (MG1655) transformed with PulA (BBa_K1149006) were grown with either 0uM or 6uM Arabinose to induce PulA expression. Growth was at 37oC with shaking. Error bars are SEM, n=4.
Proteinase K growth assay E. c	Proteinase K induction assay E. c
Proteinase K with pelB secretion tag growth assay E. c	Proteinase K with pelB secretion tag induction assay E. c

Empty Vector Control

Empty vector (EV) induction assay E. coli (MG1655) transformed with empty vector (EV) control plasmid were grown with either 0uM or 6uM Arabinose. Growth was at 37oC with shaking. Error bars are SEM, n=4.

Growth assay characterisation of existing biobricks

Stress biosensor characterisation (BBa_K639003)

Originally we intended on using [http://parts.igem.org/Part:BBa_K639003 BBa_K639003] to detect whether our cells were stressed when grown with an array of potentially toxic plastics and degradation products. However, as the data below shows, the promoter is leaky and expresses mCherry in a non stressed state. As an alternative we utilised the stress sensor as a marker for our chassis E. coli (MG1655) for an array of qualitative and quantitative waste growth and toxicity assays.

Note: The stress sensor induces mCherry production through a mechanism involving the ppGpp stress response. Induction with IPTG bypassess this mechanism through an inhibition of LacI, resulting in mCherry expression.

Stress sensor growth assayE. coli (MG1655) transformed with stress biosensor (BBa_K639003) and grown at 37oC, with shaking for 6 hours. Error bars represent S.E.M. n=4	Stress sensor IPTG induced fluorescenceE. coli (MG1655) transformed with stress biosensor (BBa_K639003) and grown at 37oC, with shaking for 6 hours. Error bars represent S.E.M. n=4
BBa_K639003 transformed into E coli. strain MG1655. Pink colonies are visible, which relate to 'leaky' mCherry production	BBa_K639003 transformed into E coli. strain MG1655. Cells were grown at 37oC in 4ml LB with 0, 1 or 2mM IPTG. At 6 hours post IPTG induction, cells were spun down and imaged.

phaCAB biobrick characterisation

LB

Figure 1: MG1655 in LB with plasmids EV and phaCAB. There is no growth inhibition when comparing the empty vector with the phaCAB vector in each media. LB shows the strongest growth curve with minimal latency. Error bars are SEM, n=4.

M9 Minimal

Figure 1: MG1655 in M9M with plasmids EV and phaCAB. There is no growth inhibition when comparing the empty vector with the phaCAB vector in each media. M9M shows the least growth growth of all the medias as it has low carbon and amino acid content. Error bars are SEM, n=4.

M9 Supplemented

Figure 1: MG1655 in M9S with plasmids EV and phaCAB. There is no growth inhibition when comparing the empty vector with the phaCAB vector in each media. M9S shows a lag phase in growth but quickly increases due to increased amino acid content, nearly reaching LB after 5h. Error bars are SEM, n=4.

pBAD characterisation

Cell growth over 6h with IPTG induction. mCherry production is induced by the stress pathway and detection of ppGpps. In order to bypass this, we induced with IPTG which inhibits LacI, resulting in mCherry expression.	Fluorescence of the cells under IPTG induction over a 6h period.

Cell growth over 6h with IPTG induction. mCherry production is induced by the stress pathway and detection of ppGpps. In order to bypass this, we induced with IPTG which inhibits LacI, resulting in mCherry expression.	Fluorescence of the cells under IPTG induction over a 6h period.

Glucose

Cell growth of phaCAB E. coli at 4 concentrations of glucose. Optimum growth is at 2-4% glucose at 37ºC. Error bars represents SE of the mean, n=4

Cell growth over 6h in LB and M9M minimal media. LB grown MG1655 phaCAB grow more rapidly initially then M9M but reach the same OD after 6h while EV shows a different trend. EV in M9M levels off at a much lower OD at 4h, as seen with EV grown in LB. Error bars are SEM, n=4.	Cell growth over 6h in LB and M9S minimal media. LB grown MG1655 phaCAB grow more rapidly initially then M9S but after 5h, phaCAB in M9S continue to grow to a higher OD. EV shows a different trend, in M9S it levels off at a similar level to LB. Error bars are SEM, n=4.

ANOVA analysis shows that...

Plastic Toxicity Assays

L-lactic Acid

Cell growth of MG1655 on 5mM L-Lactic Acid. Error bars represents SE of the mean, n=4.

Ethylene glycol

Cell growth of MG1655 in ethylene glycol, a byproduct of polyurethane degradation. Cells were grown in 0mM, 100mM or 200mM Ethylene Glycol at 30ºC. Error bars represents SE of the mean, n=4

Reduced growth at 30oC likely due to decreased efficiency of MG1655 ethylene glycol break down enzymes. These enzymes (see UC Davis 2012) are endogenously expressed and detoxify Ethylene Glycol.