Team:KU Leuven/Safety
From 2013.igem.org
Secret garden
Congratulations! You've found our secret garden! Follow the instructions below and win a great prize at the World jamboree!
- A video shows that two of our team members are having great fun at our favourite company. Do you know the name of the second member that appears in the video?
- For one of our models we had to do very extensive computations. To prevent our own computers from overheating and to keep the temperature in our iGEM room at a normal level, we used a supercomputer. Which centre maintains this supercomputer? (Dutch abbreviation)
- We organised a symposium with a debate, some seminars and 2 iGEM project presentations. An iGEM team came all the way from the Netherlands to present their project. What is the name of their city?
Now put all of these in this URL:https://2013.igem.org/Team:KU_Leuven/(firstname)(abbreviation)(city), (loose the brackets and put everything in lowercase) and follow the very last instruction to get your special jamboree prize!
![tree](https://static.igem.org/mediawiki/2013/a/ac/Tree.png)
![ladybugcartoon](https://static.igem.org/mediawiki/2013/6/64/Ladybugcartoon.png)
Safety
It is of course very important to stay safe. Here we have gathered information on how we stayed safe in our lab, what the government rules and the rules of the University of Leuven are. Finally, how we could keep our bacterium from spreading if it would eventually be commercialised and released into the environment. We have also written an ethical evaluation of our system concerning certain safety issues.
Safety forms were approved on September 29, 2013 by the iGEM Safety Committee.
General Safety
We have covered the safety aspect of our project in many ways. Within synthetic biology there should be three main risks that need to be covered: exposure of the laboratory workers to the bacteria and chemicals, effects of a possible escape of the bacteria and the unintentional disturbance of the ecosystem.
All members of the team received extra safety training at the beginning of the project, on top of that we took courses regarding safety aspects, e.g. ‘Safe Microbiological Practices’. The safety training consisted of a summary of the important biosafety issues and the composition of the lab.
![Laurens Labo](https://static.igem.org/mediawiki/2013/6/66/Laurens_labo.png)
![some_text](https://static.igem.org/mediawiki/2013/f/ff/Ladybug_full.png)
(Max Gibson)
In the past three months, we added new branches into the pathways of E. coli. Our experiments were performed with non-pathogenic E. coli strains (BL21, DH5α, TOP10 and Rosetta™(DE3)pLysS), which belong to risk group 1 of the pathogenic organisms. Working with genetically modified organisms demands extra safety conditions; physical measures are taken to separate the organism from the surrounding environment and vice versa.
Our project wants to protect plants and crops against aphid infestations and reduce the use of harmful insecticides. Our genetically modified bacteria (BanAphids) will produce (E)-β-farnesene (EBF) and methyl salicylate (MeS), which are naturally occurring substances. EBF repels aphids and MeS attracts ladybugs, one of the aphid's natural enemies. The low concentrations needed for these substances to be effective is not toxic for humans. No harmful effects are described for EBF at high concentrations either. Contrarily, pure MeS could cause harm when it is ingested due to its similarities with acetylsalicylic acid (aspirin) and can cause irritation after contact with eyes and skin. Nevertheless, it is typically used in small amounts as a flavouring agent in candy, or as fragrance oils due to its mint flavour and wintergreen fragrance. The two chemicals being produced by our BanAphids could cause allergic reactions (swelling, redness, ...), but serious reactions only occur in high concentrations and are very rare.
The effect of BanAphids on the environment is not trivial and thorough field experiments must definitely be conducted. The maximum production rate of a single bacterium needs to be determined so that this could be scaled up through a model so that we would be able to estimate the concentration of EBF and MeS in the surroundings if a whole field would be occupied by our bacteria. We can then determine the necessary parameters in order to minimise ecological disruption according to surrounding concentrations of MeS and EBF. We also thought about the interactions between aphids and ladybugs themselves. Aphids adapt readily when EBF is constantly present, therefore we included an oscillatory model. More information about this model can be found here.
Regulations
Legislation in Belgium & Europe
![some_text](https://static.igem.org/mediawiki/2013/3/3e/European_figure.jpg)
(JRC - European Commission)
University of Leuven rules
The University of Leuven has its own biosafety rules in addition to the national biosafety regulations, where Marianne Schoukens acts as the central contact point for Health, Safety and Environment (HSE) issues. All members of our team have received training in Safe Microbiological Techniques as well as general and specific lab safety required by the University of Leuven. At the beginning of our project, all members of the iGEM team have received an update from the KU Leuven's HSE department. Via liaison Iris Govaerts, we followed a small seminar and filled in an orientation checklist concerning health and safety training prior to the start of project laboratory work.
The project we ultimately chose was the result of a whole series of brainstorm sessions. In these brainstorm sessions we discussed the feasibility of our ideas with our instructor (Dr. Ir. Ingmar Claes) and our coordinators (Prof.Dr. Johan Robben and Dr.Veerle De Wever). We also invited different PhD students, professors, ex-iGEMers and people from the industrial sector to our brainstorm sessions. They have a lot more knowledge about the specific topics and could help us greatly with our decisions. Once the project was in progress, we also contacted a lot of people with questions about the possibilities. For instance we talked to the company Perseus (Partner in Regulatory and Safety Services) to discuss the possible hurdles we would face and which safety aspects we need to incorporate. All these people had another view on our project and helped us taking into account different issues about the safety of our project: the molecules that our bacteria will produce, release into the environment, etc ...
Environmental safety
If our project would be used outside the laboratory, many parameters would need to be determined. As stated earlier, the pheromones produced by the BanAphids are not harmful for our health unless available in high concentrations. So if the BanAphids would be spread across acres of land, the concentration of pheromones could attain a high level. The ceiling of this production would need to be determined to see whether it could be a harmful concentration for our health. Insects however do not need as high of a concentration as humans do to develop a reaction. Therefore the disruption of the ecosystem would need to be considered as well. As with most products released in the environment, its bioaccumulation needs to be at a minimum.
![](https://static.igem.org/mediawiki/2013/e/ec/Ladybug_tree.png)
(Norcal)
Bacterial safety
In all our experiments, we used non-pathogenic E. coli strains. These strains are not harmful for humans, except when they are inhaled or swallowed. The chemicals that are produced by our genetically modified E. coli strain are natural molecules and are not harmful for the environment. An accidental release of our bacteria into the environment could have unexpected effects on the ecological balance. As suggested by Moe-Behrens et al., 2013, containment through engineered auxotrophy so that BanAphids are unable to synthesise an essential compound required for their survival, is the most reliable method currently for biocontainment. We propose the use of a tryptophan auxotrophic bacterium.
When tryptophan auxotrophic bacteria will be used in our project, we must provide tryptophan in their medium. This is a good candidate for the biocontainment of BanAphids when the bacteria grow together on a petri dish or another closed environment. For instance, in one of the models we designed where the bacteria are grown in a contained environment, the sticker (Design of Groningen iGEM 2012). This plastic sticker is composed of a plastic film with pores that are too small for the bacteria, but through which our volatiles (EBF and MeS) can escape. This auxotrophic mechanism, however, does not work when we want to spray the bacteria on the plants and crops.
In the second model we have designed, the bacterium would be free in the environment and thus not contained in an enclosed container with medium. Therefore, an auxotrophic mechanism would not be applicable. Here we turn to a ‘kill switch’ or induced lethality mechanism, which is less reliable because of spontaneous mutations that could inactivate or disable this ‘kill switch’. Different kill switches are already being used in the iGEM competition. When we would choose for this method, we have to examine all the available kill switches and select the best one.
![genetic safeguard strategies](https://static.igem.org/mediawiki/2013/4/4c/Genetic_safeguard_strategies.jpg)
Genetic safeguard strategies.
Recombinant DNA (bright green) is introduced into the host chromosome (white wavy lines). Two pathways for engineered auxotrophy (A,B) kill synthetic organisms (blue) once they lose access to a supplement (+) in a controlled environment. The supplement either (A) suppresses a toxic gene product (−) or (B) provides nutrition to compensate for a genetic deletion (red X). The induced lethality system (C) produces a toxic gene product (−) in response to an inducer (i) such as IPTG, sucrose, arabinose, or heat. (Moe-Behrens et al., 2013)
Auxotrophic mechanism
We, the KU Leuven iGEM team of 2013, propose the use of an auxotrophic mechanism as our main genetic safeguard, when we use our "sticker" or "oscillator" model.
The basic mechanism of auxotrophy is based on the fact that, since auxotrophic organisms are unable to synthesize an essential compound required for their survival, they rapidly die once they escape the controlled environment where the compound is supplied.
Already in 1987, Molin and colleagues designed a DNA cassette that functions as a conditional suicide system in any healthy bacterial strain. In the absence of an artificially supplied growth supplement, the cassette produced a toxic protein that damages bacterial cell membranes and kills the cells. Also, stochastic activation of this toxic component could be used to kill a predetermined fraction of cells per unit of time. This helps to tune the level of lethality so that an optimal level of bioproduction is achieved.(Moe-Behrens et al., 2013)
This year, we present two models in which the use of an auxotrophic mechanism can be easily manifested, especially for the "sticker" or "oscillator" model.
However, auxotrophic mechanisms might be difficult to manage in our "spray" or "glucose" model.
![some_text](https://static.igem.org/mediawiki/2013/5/5d/Stickermodelverkleind.png)
![some_text](https://static.igem.org/mediawiki/2013/f/f2/Spray_antiaphid.png)
Kill Switch
The basic mechanism of a kill switch is that the engineered organisms survive until an inducer signal (e.g., IPTG) is added, which kills the cells. This induced lethality could be used clean up synthetic microbe spills without harming other cells in the environment (Moe-Behrens et al., 2013).
Inducible kill systems are not new to iGEM. There are already several constructs available in the database, such as the inducible BamHI system contributed by Berkeley in 2007 (BBa_I716462, tested by Lethbridge in 2011). Here, a BamHI gene was placed downstream of an arabinose-inducible promotor.
Unfortunately, the lethal gene is a central cause of safeguard failure. Spontaneous genetic mutations can both deactivate and activate lethal gene expression, which may worsen the failure of bio containment. As engineered cells are passaged in the laboratory, or as they propagate in large bioreactors, broken genetic safeguards can gradually accumulate in the population. If the utility of the bio containment mechanism is lost, then the synthetic organisms might survive in the environment after disposal or accidental release.(Moe-Behrens et al., 2013)
Next, a lack of tight control is also a big problem within these systems. Leaky systems cannot be controlled strictly. Therefore, the Calgary team of 2012 added a riboswitch, which is a small piece of mRNA that binds ligands and modifies translation of downstream genes; this way the kill switch can be more tightly controlled. For further details, we would gladly invite you to read the extensive literature study on the wiki of the Calgary 2012 Team .