Team:CSU Fort Collins/SHItires

From 2013.igem.org

(Difference between revisions)
Line 8: Line 8:
-
<h2>Here's the Idea</h2>
+
<h2>Concept</h2>
Line 15: Line 15:
<p>If the prezi does not load in your browser you can find it <a class="here." href="http://prezi.com/340snolmldh4/?utm_campaign=share&utm_medium=copy&rc=ex0share&amp;action=edit">here</a>.</p>
<p>If the prezi does not load in your browser you can find it <a class="here." href="http://prezi.com/340snolmldh4/?utm_campaign=share&utm_medium=copy&rc=ex0share&amp;action=edit">here</a>.</p>
<h2>Results</h2>
<h2>Results</h2>
-
<p>Before we even attempted to engineer new yeast, we needed an initial trial to see if the tires would even inflate with hydrogen peroxide and yeast. We used a 26" bicycle tire as our testing apparatus. To measure pressure we used a Fluke Multimeter to directly measure millivolts from a pressure transducer hooked up to the bicycle tire. We combined the yeast (20ml), 10% H2O2 (100ml), YPD (130ml) in the tire itself sequentially. Once mixed, we immediately attached the pressure transducer and began recording data once every 10 seconds. Below is the graph of our results.</p><br />
+
<p>Before we even attempted to engineer new yeast, we needed an initial trial to see if the tires would even inflate with hydrogen peroxide and yeast. We used a 26" bicycle tire as our testing apparatus. To measure pressure we used a Fluke Multimeter to directly measure millivolts from a pressure transducer hooked up to the bicycle tire. We combined the yeast (20ml), 10% H2O2 (100ml), YPD (130ml) in the tire itself sequentially. Once mixed, we immediately attached the pressure transducer and recorded pressure data at 10 second intervals. Below is the graph of our results.</p><br />
<img src="https://static.igem.org/mediawiki/2013/9/9f/Tire_Graph_CSUFC_2013.png" alt="Tire Inflation Graph"><br><br>
<img src="https://static.igem.org/mediawiki/2013/9/9f/Tire_Graph_CSUFC_2013.png" alt="Tire Inflation Graph"><br><br>

Revision as of 03:35, 28 September 2013

Bike Tire Inflation and Puncture Repair

Concept


If the prezi does not load in your browser you can find it here.

Results

Before we even attempted to engineer new yeast, we needed an initial trial to see if the tires would even inflate with hydrogen peroxide and yeast. We used a 26" bicycle tire as our testing apparatus. To measure pressure we used a Fluke Multimeter to directly measure millivolts from a pressure transducer hooked up to the bicycle tire. We combined the yeast (20ml), 10% H2O2 (100ml), YPD (130ml) in the tire itself sequentially. Once mixed, we immediately attached the pressure transducer and recorded pressure data at 10 second intervals. Below is the graph of our results.


Tire Inflation Graph

Edit page