Team:Freiburg/Project/method

From 2013.igem.org

(Difference between revisions)
Line 106: Line 106:
uniBAss Introduction
uniBAss Introduction
</p>
</p>
-
<p> The need to characterize the behavior of CRISPR/Cas is motivated by several means. Different fusion constructs have been build based on the CRISPR/Cas system such as our  dCas9-VP16 or dCas9–KRAB constructs, but it remained unclear if the binding characteristics of dCas9-VP16/KRAB are different from dCas9 alone. Simulating complex gene circuits in - silico generates new needs for straight forward characterization of the binding affinity followed by quantification. By this mean information can be gathered about a variety of promoters for different dCas9 fusion constructs. Different assays have been developed to characterize protein - DNA interplay to analyze their respective binding behavior <span id="refer"> <a href="#(1)"> [1]</a></span>. Examples of these protein characterization assays are the Chromatin Immuoprecipitation (ChIP) and the DNA Electrophoretic Mobility Shift Assay (EMSA). Both systems have individual strength as well as limitations. ChIP can be used to quantify a sample when coupled with qPCR analysis. However ChIP is limited by the absence of high throughput possibilities <span id="refer"> <a href="#(2)"> [2]</a></span>. EMSA is able to detect low abundance DNA binding proteins from lysate with a high sensitivity but it is difficult to quantitate a sample <span id="refer"> <a href="#(3)"> [3]</a></span>.However, the those assays do not address the need to analyze the binding of a protein to its respective DNA sequence and thus perform a quantification with high capabilities. Starting from this needs a new assay for the biochemical characterization of dCas9 had to be established with the requirements of binding capacity test and quantification with high throughput capabilities. Therefore we developed our Enzyme-linked Immunosorbent Assay (ELISA) uniBAss.
+
<p> The need to characterize the behavior of CRISPR/Cas is motivated by several means. Different fusion constructs have been build based on the CRISPR/Cas system such as our  dCas9-VP16 or dCas9–KRAB constructs, but it remained unclear if the binding characteristics of dCas9-VP16/KRAB are different from dCas9 alone. Simulating complex gene circuits in - silico generates new needs for straight forward characterization of the binding affinity followed by quantification. By this mean information can be gathered about a variety of promoters for different dCas9 fusion constructs. Different assays have been developed to characterize protein - DNA interplay to analyze their respective binding behavior <span id="refer"> <a href="#(1)"> [1]</a></span>. Examples of these protein characterization assays are the Chromatin Immuoprecipitation (ChIP) and the DNA Electrophoretic Mobility Shift Assay (EMSA). Both systems have individual strength as well as limitations. ChIP can be used to quantify a sample when coupled with qPCR analysis. However ChIP is limited by the absence of high throughput possibilities <span id="refer"> <a href="#(2)"> [2]</a></span>. EMSA is able to detect low abundance DNA binding proteins from lysate with a high sensitivity but it is difficult to quantitate a sample <span id="refer"> <a href="#(3)"> [3]</a></span>. However, the those assays do not address the need to analyze the binding of a protein to its respective DNA sequence and thus perform a quantification with high capabilities. Starting from this needs a new assay for the biochemical characterization of dCas9 had to be established with the requirements of binding capacity test and quantification with high throughput capabilities. Therefore we developed our Enzyme-linked Immunosorbent Assay (ELISA) uniBAss.
The assay is based on a streptavidin-biotin interaction <span id="refer"> <a href="#(4)"> [4]</a></span> with the 5’ biotin tag of the oligonucleotide <span id="refer"> <a href="#(5)"> [5]</a></span> was used to immobilize the target DNA.
The assay is based on a streptavidin-biotin interaction <span id="refer"> <a href="#(4)"> [4]</a></span> with the 5’ biotin tag of the oligonucleotide <span id="refer"> <a href="#(5)"> [5]</a></span> was used to immobilize the target DNA.
</p>
</p>

Revision as of 15:05, 30 September 2013


uniBAss - uniCAS Binding Assay

uniBAss ELISA



How uniBAss works

1. First a 96-well ELISA plate is coated with streptavidin. Then biotinylated oligonucleotides containing the DNA sequence complementary to the crRNA incorporated into dCas9 are applied.

2. 42h after transfection the HEK293 cells are taken up in diluent buffer and are lysed by sonifying. Then the cell lysate is ready to be applied to the wells.

3. The dCas9 in the cell lysate can now bind via its incorporated crRNA to the complementary oligo on the bottom of the well.

4. After washing away everything that did not bind to the oligos the first antibody is added. This mouse anti-HA antibody binds to the HA- tag at the N-terminus of dCas9.

5. When the unbound first antibody is washed away the secondary antibody can be added. The secondary anti-mouse-antibody is coupled to a horseradish peroxidase (HRP) that catalyzes the oxidation of ABTS by hydrogen peroxide resulting in a change in color.

6. The intensity of the color is than measured at 405nm and represents the amount of dCas9 bound in each well.

uniBAss Introduction

The need to characterize the behavior of CRISPR/Cas is motivated by several means. Different fusion constructs have been build based on the CRISPR/Cas system such as our dCas9-VP16 or dCas9–KRAB constructs, but it remained unclear if the binding characteristics of dCas9-VP16/KRAB are different from dCas9 alone. Simulating complex gene circuits in - silico generates new needs for straight forward characterization of the binding affinity followed by quantification. By this mean information can be gathered about a variety of promoters for different dCas9 fusion constructs. Different assays have been developed to characterize protein - DNA interplay to analyze their respective binding behavior [1]. Examples of these protein characterization assays are the Chromatin Immuoprecipitation (ChIP) and the DNA Electrophoretic Mobility Shift Assay (EMSA). Both systems have individual strength as well as limitations. ChIP can be used to quantify a sample when coupled with qPCR analysis. However ChIP is limited by the absence of high throughput possibilities [2]. EMSA is able to detect low abundance DNA binding proteins from lysate with a high sensitivity but it is difficult to quantitate a sample [3]. However, the those assays do not address the need to analyze the binding of a protein to its respective DNA sequence and thus perform a quantification with high capabilities. Starting from this needs a new assay for the biochemical characterization of dCas9 had to be established with the requirements of binding capacity test and quantification with high throughput capabilities. Therefore we developed our Enzyme-linked Immunosorbent Assay (ELISA) uniBAss. The assay is based on a streptavidin-biotin interaction [4] with the 5’ biotin tag of the oligonucleotide [5] was used to immobilize the target DNA.

Results

Cas9 truncation

Reason for truncating dCas9

With 160 kDa is the dCas9 protein of the CRISPR/Cas system the largest molecular tool among Zinc Fingers and Transcription Activator – Like Effectors. Difficulties that occurred during the light induced translocation of a dCas9 fusion construct in the nucleus indicated that the size of dCas9 might be a bottleneck for efficient genome engineering hence a truncation strategy was developed.

How to truncate dCas9

To reduce the size of dCas9 we ran a PCR over the backbone with two primers binding in cas9, one with an overlap for gibson assembly. After the PCR one-fragment gibson cloning performed. We tried five different strategies where to reduce the size of the dCas9 protein. In the first attempt we deleted 365bp near the N-terminus of the protein. In a second try we erased 306bp near the C-terminal part of dCas9. Here we assume the reverse transcription domain of the protein, which will probably be responsible for DNA binding. Therefore this truncation is thought to verify this assumption and can serve as a negative control. For truncation 3, 4, and 5 we just deleted the beginning, the middle and the end of dCas9 more drastically by throwing out about 1000bp.

Results

The PCR over the pSB1C3 backbone

Sources

(1) Lutolf MP, Hubbell J a. 2005. Synthetic biomaterials as instructive extracellular microenvironments for morphogenesis in tissue engineering. Nature biotechnology 23:47–55.
(2) Gibson DG, Glass JI, Lartigue C, Noskov VN, Chuang R-Y, Algire MA, Benders GA, Montague MG, Ma L, Moodie MM, Merryman C, Vashee S, Krishnakumar R, Assad-Garcia N, Andrews-Pfannkoch C, Denisova EA, Young L, Qi Z-Q, Segall-Shapiro TH, Calvey CH, Parmar PP, Hutchison CA, Smith HO, Venter JC. 2010. Creation of a bacterial cell controlled by a chemically synthesized genome. Science 329:52–56.
(3) Hellman LM, Fried MG. 2007. Electrophoretic mobility shift assay (EMSA) for detecting protein-nucleic acid interactions. Nature protocols 2:1849–61.
(4) Hyre DE, Trong ILE, Merritt EA, Eccleston JF, Green NM, Stenkamp RE. 2006. Cooperative hydrogen bond interactions in the streptavidin – biotin system:459–467.
(5) Weber CC, Link N, Fux C, Zisch AH, Weber W, Fussenegger M. 2005. Broad-spectrum protein biosensors for class-specific detection of antibiotics. Biotechnology and bioengineering 89:9–17