From 2013.igem.org

Revision as of 13:29, 4 October 2013 by RomanM89 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Notebook: September

02.09.2013 + 03.09.2013

Phaeodactylum tricornutum was firstly transfected (Link zu Marian) with the antibody expression vector consisting of the heavy and light chain of the Hepatitis B antibody under the control of the nitrate reductase promoter as well as the zeocin resistance.

The microalgae were grown to an OD of 0,4 in medium containing 0,9 mM NO₃^-. Afterwards the proteins of 2 ml culture were extracted.

Cell culture is centrifuged for 5 minutes (13000 g)
Supernatant and pellet were divided into two tubes
Add 150µl sodium hydroxide to the cell pellet to disrupt the cells (not to the supernatant)
Incubate 10 minutes on ice
Add 850 µl bidest water
Add 200 µl 70 % TCA to the disrupted cells and to the supernatant
Incubate for 20 minutes on ice
Centrifuge for 15 minutes at 4 °C (20000xg)
Wash pellet with aceton and centrifuge for 15 minutes at 4 °C
Repeat the latter step until the chlorophyll is washed out
Dry pellet at room temperature
Resuspend in 8 M urea-buffer
Shake the samples for 15 minutes at 60 °C

Composition of the urea-buffer (for 40 ml):
Urea 8 M		19,22 g
2 M Tris/HCl pH 6,8		4 ml
0,5 M EDTA		8 µl
10 % SDS		20 ml
Bromophenol blue		12 mg

Add 10 µl 2-mercaptoethanol to 1 ml urea-buffer.

To show the antibody production as well as the secretion of the Hepatitis B antibodies a Western Blot analysis (Link zu Western Blot Methode von Flo) was performed. Therefore a 12 % SDS-Gel was used:

Separation gel
1 M Tris-HCl pH8,8		2,25 ml
Aa/Bis 30:0,88		2,4 ml
H₂O		1,2 ml
10 % SDS (w/v)		75 µl
10 % APS		100 µl
TEMED		10 µl

Stacking gel
1 M Tris-HCl pH6,8		375 µl
Aa/Bis 30:0,88		500 µl
H₂O		2050 µl
10 % SDS (w/v)		30 µl
10 % APS		50 µl
TEMED		7,5 µl

For further information see: Link zu Florians Methode.

06.09.2013

PCR

Investigator: Franzi

Aim: Construction of iBB14 → Adding of pre- and suffix via PCR.

Dissolved BioBrick BBa_E1010 (RFP) from spring distribution Kit 2013 with 10 µl bidest. H2O (P3, 12N). Used as template for PCR.

Volume	Reagent	Temp (°C)	Time
1 µl	Phusion-Polymerase	95	3 min
1 µl	Primer 50 fw (10 pmol/µl)	95	30 sec
1 µl	Primer 51 rv (10 pmol/µl)	60	1 min	x35
1 µl	Template	72	1 min
1 µl	dNTPs	72	5 min
10 µl	5xGC buffer	4	Hold
34 µl	bidest. H2O

Gel electrophoresis

Gel substances

1% Agarose gel
10 µl RedSafe in 50 ml gel
6 µl GeneRuler™ 1kb plus DNA Ladder (Thermo Scientific)
6x loading buffer (for samples)

Lane		Content		Expectations
2+3		RFP-PCR		780 bp

The relevant fragments were cut from the gel and then purified via QIAgen Gel Extraction Kit (Qiagen). Elution into 30 µl elution buffer.

09.09.2013

Transformation

Investigator: Franzi

Aim: Construction of iBB14 → Retransformation of BBa_E1010.

Retransformation of 1 µl pSB1C3 BBa_E1010 into E. coli DH5α (30 min on ice, 60 sec 42 °C, 90 min 37 °C + 900 µl LB), plated on LB_CM, overnight at 37 °C.

PCR

Investigator: Franzi

Aim: Construction of iBB15 (MTS) → Adding pre- and suffix via PCR.

Volume	Reagent	Temp (°C)	Time
1 µl	Phusion-Polymerase	95	3 min
1 µl	Primer 52 fw (10 pmol/µl)	95	30 sec
1 µl	Primer 53 rv (10 pmol/µl)	65	30 sec	x32
1 µl	Template (provided by AG Bange)	72	45 sec
1 µl	dNTPs	72	7 min
10 µl	5xGC buffer	4	Hold
35 µl	bidest. H2O

Gel electrophoresis

Gel substances

2% Agarose gel
10 µl RedSafe in 50 ml gel
6 µl GeneRuler™ 1kb plus DNA Ladder (Thermo Scientific)
6x loading buffer (for samples)

Lane	Content	Expectations
2-6	none
7	MTS-PCR (1)	1 band at 107 bp
8	MTS-PCR (2)	1 band at 107 bp

The relevant fragments were cut from the gel and then purified via QIAgen Gel Extraction Kit (Qiagen). Elution into 30 µl elution buffer.

10.09.2013

Digest

Investigator: Franzi

Aim: Construction of iBB14-15 → Digestion of single parts.

10 µl DNA template
1 µl enzyme 1
1 µl enzyme 2
2 µl Cut Smart buffer
6 µl bidest. H2O

Samples:

Digestion of iBB15 with XbaI and PstI-HF

Digestion of iBB14 with EcoRI-HF and SpeI-HF.

The samples were incubated for 1,5 h at 37 °C.

They were purified via QIAgen Gel Extraction Kit (Qiagen). Elution into 20 µl elution buffer.

Ligation

Investigator: Franzi

Aim: Construction of iBB14-15 → Ligation of two single parts into pSB1C3.

23 ng vector DNA (pSB1C3; EcoRI/PstI-cut)
44 ng iBB14 (EcoRI/PstI-cut)
41 ng iBB15 (EcoRI/PstI-cut)
2 µl 10x T4 DNA ligase buffer
1 µl T4 DNA ligase
ad 20 µl bidest. H2O

The samples were incubated for 2 h at RT.

Transformation

Investigator: Franzi

Aim: Construction of iBB14-15 → Transformation of combined BioBrick in pSB1C3 into E. coli DH5α.

Complete ligation samples were transformed into E. coli DH5α (30 min on ice, 60 sec 42 °C, 60 min 37 °C + 900 µl LB), plated on LB_CM, overnight at 37 °C.

Digest

Investigator: Franzi

Aim: Construction of iBB15 → Digestion with EcoRI and PstI.

10 µl DNA template (iBB15 from PCR)
1 µl EcoRI-HF
1 µl PstI-HF
2 µl Cut Smart buffer
6 µl bidest. H2O

The samples were incubated for 30 min at 37 °C.

They were purified via QIAgen Gel Extraction Kit (Qiagen). Elution into 20 µl elution buffer.

Ligation

Investigator: Franzi

Aim: Construction of iBB15 → Ligation of iBB15 into pSB1C3.

23 ng vector DNA (pSB1C3; EcoRI/PstI-cut)
40 ng iBB15 (EcoRI/PstI-cut)
2 µl 10x T4 DNA ligase buffer
1 µl T4 DNA ligase
ad 20 µl bidest. H2O

The samples were incubated for 30 min at RT.

Transformation

Investigator: Franzi

Aim: Construction of iBB15 → Transformation of iBB15 in pSB1C3 into E. coli DH5α.

Complete ligation samples were transformed into E. coli DH5α (30 min on ice, 60 sec 42 °C, 60 min 37 °C + 900 µl LB), plated on LB_CM, overnight at 37 °C.

11.09.2013

Ligation

Investigator: Franzi

Aim: Construction of iBB15 → Repeat of ligation of iBB15 into pSB1C3.

Reason: No colonies of pSB1C3 iBB15 on transformation plates.

46 ng vector DNA (pSB1C3; EcoRI/PstI-cut)
40 ng iBB15 (EcoRI/PstI-cut)
3 µl 10x T4 DNA ligase buffer
1 µl T4 DNA ligase
ad 30 µl bidest. H2O

The samples were incubated for 30 min at RT.

Transformation

Investigator: Franzi

Aim: Construction of iBB15 → Repeat of transformation of iBB15 in pSB1C3 into E. coli DH5α.

Complete ligation samples were transformed into E. coli DH5α (30 min on ice, 60 sec 42 °C, 60 min 37 °C + 1 ml LB), plated on LB_amp, overnight at 37 °C.

Inoculation

Investigator: Franzi

Aim: Construction of iBB14-15 and iBB14, inoculation of pSB1C3 iBB14-15 and pSB1C3 BBa_E1010 for miniprep.

5 colonies of pSB1C3 iBB14-15 and 2 colonies of pSB1C3 BBa_E1010 inoculated in 5 ml LB_CM, overnight at 37 °C.

12.09.2013

Miniprep

Investigator: Franzi

Aim: Construction of iBB14-15 and iBB14 → Miniprep of pSB1C3 iBB14-15 and pSB1C3 BBa_E1010.

Miniprep of the liquid cultures (“QIAprep Spin Miniprep Kit” (Qiagen, Düsseldorf)), eluted in 50 µl elution buffer.

Digest

Investigator: Franzi

Aim: Construction of iBB14-15 → Control digestion of pSB1C3 iBB14-15.

2 µl DNA template
0,5 µl EcoRI-HF
5 µl PstI-HF
1 µl Cut Smart buffer
6 µl bidest. H2O

The samples were incubated for 1 h at 37 °C.

Gel electrophoresis

Gel substances

1% Agarose gel
10 µl RedSafe per 50 ml gel
6 µl GeneRuler™ 1kb plus DNA Ladder (Thermo Scientific)
6x loading buffer (for samples)

Lane	Content	Expectations
2	iBB14	pSB1C3: 2 kb iBB14-15: 850 bp iBB14 E/S: 750 bp
3	iBB14-15 clone 1
4	iBB14-15 clone 2
5	iBB14-15 clone 3
6	iBB14-15 clone 4
7	iBB14-15 clone 5
8	iBB14-15 clone 6

All clones except clone 3 are positive.

Sequencing

Investigator: Franzi

Aim: Construction of iBB14-15 → K4 and K5 sent for sequencing.

IBB14-15 K4 and K5 sequenced with primers VF2_fw and VR_rv (AGBOOOK565-568).

Digest

Investigator: Franzi

Aim: Construction of iBB15 → Repeat of digestion with EcoRI and PstI.

Reason: Transformations of 11.09.13 unsuccessful.

9 µl DNA template (iBB15 from PCR)
1 µl EcoRI-HF
1 µl PstI-HF
2 µl Cut Smart buffer
7 µl bidest. H2O

The samples were incubated for 2 h at 37 °C.

They were purified via QIAgen Gel Extraction Kit (Qiagen). Elution into 20 µl elution buffer.

Ligation

Investigator: Franzi

Aim: Construction of iBB15 → Repeat of ligation of iBB15 into pSB1C3.

20 ng vector DNA (pSB1C3; EcoRI/PstI-cut)
40 ng iBB15 (EcoRI/PstI-cut)
2 µl 10x T4 DNA ligase buffer
1 µl T4 DNA ligase
ad 20 µl bidest. H2O

The samples were incubated for 2,5 h at RT.

Transformation

Investigator: Franzi

Aim: Construction of iBB15 → Repeat of transformation of iBB15 in pSB1C3 into E. coli DH5α.

Complete ligation samples were transformed into E. coli DH5α (30 min on ice, 60 sec 42 °C, 60 min 37 °C + 900 µl LB), plated on LB_CM, overnight at 37 °C.

Transformation

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Retransformation of BBa_R0010 and BBa_B0034.

Retransformation of BBa_R0010 (PlacI, pSB1C3), BBa_B0034 (RBS, pSB1A2) into E.coli DH5α (30 min on ice, 60 sec 42 °C, 60 min (PlacI)/30 min (RBS) 37 °C + 900 µl LB), plated on LB_CM (PlacI)/LB_amp, overnight at 37 °C.

13.09.2013

Sequencing

Investigator: Franzi

Aim: Construction of iBB14-15 → Sequencing results.

Sequencing of pSB1C3 iBB14-15 negative (wrong restriction enzymes used, constructed with BamHI, not standard 23)

PCR

Investigator: Franzi

Aim: Construction of iBB14315 → Adding of pre- and suffix via PCR.

PCR of iBB15 repeated like 09.09.13.

Gel electrophoresis

Gel substances

1% Agarose gel
10 µl RedSafe in 50 ml gel
6 µl GeneRuler™ 1kb plus DNA Ladder (Thermo Scientific)
6x loading buffer (for samples)

Lane		Content
2		none
3		iBB14315
4		iBB14315

The relevant fragments were cut from the gel and then purified via QIAgen Gel Extraction Kit (Qiagen). Elution into 30 µl elution buffer.

Transformation

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Retransformation of BBa_R0010 and BBa_B0034.

Reason: All transformations (12.09.13) unsuccessful.

Retransformation of PlacI and RBS like 12.9.13, in addition into competent cells provided by AG Bange; RT over weekend.

All transformations will be unsuccessful (16.09.13).

16.09.2013

Digest

Investigator: Franzi

Aim: Construction of iBB14-15 → Digestion with EcoRI/PstI and BamHI.

10 µl DNA template
1 µl enzyme 1
1 µl enzyme 2
2 µl Cut Smart buffer
6 µl bidest. H2O

Samples:

Digestion of PCR-products, iBB14 with EcoRI-HF and BamHI-HF, iBB15 with BamHI-HF and PstI-HF.

The samples were incubated for 1,5 h at 37 °C.

They were purified via QIAgen Gel Extraction Kit (Qiagen). Elution into 30 µl elution buffer.

Ligation

Investigator: Franzi

Aim: Construction of iBB14-15 → Ligation of iBB14 and iBB15 into pSB1C3.

20 ng vector DNA (pSB1C3; EcoRI/PstI-cut)
40 ng iBB14 (EcoRI/PstI-cut)
40 ng iBB15 (EcoRI/PstI-cut)
2 µl 10x T4 DNA ligase buffer
1 µl T4 DNA ligase
ad 20 µl bidest. H2O

The samples were incubated for 2 h at RT.

Transformation

Investigator: Franzi

Aim: Transformation-tests, Construction of iBB14-15 and RFP-MTS-test → Transformation into E. coli (AG Bölker).

IBB14-15: Complete ligation samples were transformed into E. coli (AG Bölker) (30 min on ice, 60 sec 42 °C, 60 min 37 °C + 900 µl LB), plated on LB_CM, overnight at 37 °C.

Retransformation of PlacI and RBS like above, RBS 30 min 37 °C, plated on LB_amp.

Testtransformation of pSB1A3 J04450 into E. coli (own, AG Bange and AG Bölker), like above, plated on LB_amp.

Testtransformation will be all positive (17.09.13).

17.09.2013

Inoculation

Investigator: Franzi

Aim: Construction of iBB14-15 and RFP-MTS-test → Inoculation of transformants.

2 colonies of pSB1A2 RBS inoculated in 5 ml LB_amp, 2 colonies of pSB1C3 PlacI and 6 colonies of pSB1C3 iBB14-15 inoculated in 5 ml LB_CM, overnight at 37 °C.

18.09.2013

Miniprep

Investigator: Franzi

Aim: Construction of iBB14-15 and RFP-MTS-test → Miniprep of transformants.

Miniprep of the liquid cultures (“QIAprep Spin Miniprep Kit” (Qiagen, Düsseldorf)), eluted in 30 µl elution buffer.

Digest

Investigator: Franzi

Aim: Construction of iBB14-15 → Control digestion of pSB1C3 iBB14-15.

2 µl DNA template (pSB1C3 iBB14-15)
0,5 µl EcoRI-HF
0,5 µl PstI-HF
1 µl Cut Smart buffer
6 µl bidest. H2O

The samples were incubated for 2 h at 37 °C.

Gel electrophoresis

Gel substances

1% Agarose gel
10 µl RedSafe per 50 ml gel
6 µl GeneRuler™ 1kb plus DNA Ladder (Thermo Scientific)
6x loading buffer (for samples)

Lane	Content	Expectations
2	iBB14-15 clone 1	850 bp
3	iBB14-15 clone 2	850 bp
4	iBB14-15 clone 3	850 bp
5	iBB14-15 clone 4	850 bp
6	iBB14-15 clone 5	850 bp
7	iBB14-15 clone 6	850 bp
8	iBB14	750 bp

All positive.

Sequencing

Investigator: Franzi

Aim: Construction of iBB14-15 → Sequencing.

Sequencing K1 + K4 with primers VF2_fw and VR_rv (AGBOOOK 569-572).

Digest

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Digestion of PlacI and RBS.

10 µl pSB1C3 PlacI
1 µl SpeI
1 µl PstI-HF
2 µl Cut Smart buffer
6 µl bidest. H2O

15 µl pSB1A3 RBS
1 µl XbaI
1 µl PstI
2 µl buffer 3.1
1 µl bidest. H2O

Both samples were incubated for 2 h at 37 °C.

RBS was heat-inactivated (80 °C, 30 min).

They were purified via QIAgen Gel Extraction Kit (Qiagen). Elution into 20 µl elution buffer.

Ligation

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Ligation of PlacI and RBS into pSB1C3.

67 ng pSB1C3 PlacI
10 µl RBS
2 µl 10x T4 DNA ligase buffer
1 µl T4 DNA ligase
ad 20 µl bidest. H2O

The samples were incubated for 2 h at RT.

Transformation

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Transformation of pSB1C3 PlacI RBS into E. coli DH5α.

IBB14-15: Complete ligation samples were transformed into E. coli DH5α (30 min on ice, 60 sec 42 °C, 60 min 37 °C + 900 µl LB), plated on LB_CM, overnight at 37 °C.

19.09.2013

Sequencing

Investigator: Franzi

Aim: Construction of iBB14-15 → Sequencing results.

Point mutation at position 743 (G→A, silent) in both clones.

Shipping of the BioBricks

Investigator: Franzi

Aim: Finally sending the BioBricks to the registry. "☺"

Prepared all completed BioBricks for shipping: 250 ng Brick in 10 µl bidest. H2O.

PCR

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Control colony-PCR.

Colony-PCR of 7 colonies of pSB1C3 PlacI RBS.

Volume	Reagent	Temp (°C)	Time
0,5 µl	Q5 HF polymerase	95	3 min
0,5 µl	Primer fw (54, RBS fw)	95	30 sec
0,5 µl	Primer rv (38, VR_rv)	65	30 sec	x33
0,5 µl	dNTPs	72	45 sec
1 µl	Q5 buffer	72	7 min
18 µl	bidest. H2O	4	Hold

Gel electrophoresis

Gel substances

1% Agarose gel
10 µl RedSafe in 50 ml gel
6 µl GeneRuler™ 1kb plus DNA Ladder (Thermo Scientific)
6x loading buffer (for samples)

Lane	Content	Expectations
2	pSB1C3 PlacI RBS colony 1	positive: 180 bp negative: none
3	pSB1C3 PlacI RBS colony 2
4	pSB1C3 PlacI RBS colony 3
5	pSB1C3 PlacI RBS colony 4
6	pSB1C3 PlacI RBS colony 5
7	pSB1C3 PlacI RBS colony 6
8	pSB1C3 PlacI RBS colony 7

Inoculation

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Inoculation of pSB1C3 PlacI RBS for miniprep.

K3, 4 and 7 inoculated in 5 ml LB_CM, overnight at 37 °C.

20.09.2013

Miniprep

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Miniprep of pSB1C3 PlacI RBS.

Miniprep of the liquid cultures (“QIAprep Spin Miniprep Kit” (Qiagen, Düsseldorf)), eluted in 30 µl elution buffer.

Digest

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Digestion of pSB1C3 PlacI RBS and iBB14-15.

10 µl DNA template
1 µl enzyme 1
1 µl enzyme 2
2 µl Cut Smart buffer
6 µl bidest. H2O

Samples:

Digestion of pSB1C3 iBB14-15 with XbaI and PstI-HF

Digestion of pSB1C3 PlacI RBS K3,4,7 with EcoRI-HF and SpeI-HF.

The samples were incubated for 1,5 h at 37 °C.

They were purified via QIAgen Gel Extraction Kit (Qiagen). Elution into 20 µl elution buffer.

Ligation

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Ligation of PlacI RBS and iBB14-15 into pSB1A3.

40 ng pSB1C3
150 ng iBB14-15
160 ng PlacI RBS K3,4 or 7
2 µl 10x T4 DNA ligase buffer
1 µl T4 DNA ligase
ad 20 µl bidest. H2O

The samples were incubated for 1,5 h at RT.

Transformation

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Transformation of pSB1A3 PlacI RBS iBB14-15 into E. coli DH5α.

IBB14-15: Complete ligation samples were transformed into E. coli DH5α (30 min on ice, 60 sec 42 °C, 30 min 37 °C + 900 µl LB), plated on LB_amp, overnight at 37 °C.

22.09.2013

Inoculation

Investigator: Franzi

Aim: Construction of RFP-MTS-test, inoculation of transformants for miniprep.

4 colonies of pSB1A3 PlacI RBS K4 iBB14-15 inoculated in 5 ml LB_amp and spread onto new LB_amp-plates, overnight at 37 °C.

No colonies for K3 and K7.

23.09.2013

Miniprep

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Miniprep of pSB1A3 PlacI RBS iBB14-15.

Miniprep of the liquid cultures (“QIAprep Spin Miniprep Kit” (Qiagen, Düsseldorf)), eluted in 30 µl elution buffer.

Digest

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Control digestion of pSB1A3 PlacI RBS iBB14-15.

2 µl DNA template
0,5 µl EcoRI-HF
5 µl PstI-HF
1 µl Cut Smart buffer
6 µl bidest. H2O

The samples were incubated for 1 h at 37 °C.

Gel electrophoresis

Gel substances

1% Agarose gel
10 µl RedSafe per 50 ml gel
6 µl GeneRuler™ 1kb plus DNA Ladder (Thermo Scientific)
6x loading buffer (for samples)

Lane	Content	Expectations
2	pSB1A3-iBB14+15 clone 1	pSB1A3: 2150 bp Insert: 1020 bp
3	pSB1A3-iBB14+15 clone 2
4	pSB1A3-iBB14+15 clone 3
5	pSB1A3-iBB14+15 clone 4

All clones except clone 2 are positive.

Sequencing

Investigator: Franzi

Aim: Construction of RFP-MTS-test → Sequencing.

Sequencing K1 and K3 with primer VF2_fw and VR_rv (AGBOOOK573-576)

25.09.2013

Microscopy

Investigator: Franzi

Aim: Microscopy of RFP-MTS-test → Inoculation of pre-culture.

PSB1A3 PlacI RBS iBB14-15 K1 inoculated in 5 ml LB_amp, overnight at 37 °C.

26.09.2013

Microscopy

Investigator: Franzi

Aim: Microscopy of RFP-MTS-test → Preparation of cultures for microscopy.

125 µl culture transferred into 5 ml LB_amp, 5 ml LB_amp + 0,5 % glucose and 5 ml LB_amp + 1 mM IPTG

Incubation for 3 h at 37 °C for microscopy until OD₆₀₀ of 0.6.

Immobilisation of cells on a agarose slide and microscopy with Leica TCS SP8 STED, numerical aperture was 1.4, excitation with a 540nm laser

Analysis of the light inducible promotor

Induction by light

Phaeodactylum tricornutum expressing GFP under the light inducible promoter was grown for one week in a climate chamber. After that we put it into complete darkness for four days, for degradation of GFP and minimize the amount left in the cells. Thereafter we grew it for 24 hours under different light conditions to test the light inducible promoter.

Five conditions were tested:

	Quantum fluence rate [µmol/ m²s]	wavelength [nm]	intensity [µW/cm²]
Blue light	50	471	1275
Green light	19	571	380
Red light	50	673	1050
White light	-	standard neon tube	1580
darkness	-	-	-

After exposure the cells were harvested in darkness in 1 ml aliquots at 13,000 rpm and shock freezed in liquid nitrogen. Proteins were extracted as described in (link antibody production @roman: im lab book). With the extracted proteins we performed a Western Blot (link zu western durchführung) to see if the promoter works and to quantify the expression of GFP under the different conditions.

Western Blot

Resuspend pellet in 1 ml water
Measure OD (600 nm)
Take the volume corresponding to a certain OD
Protein preparation of the taken sample with the predefined OD
- Cell culture is centrifuged for 5 minutes (full speed)
- Discard supernatant
- Add 150 µl sodium hydroxide
- Incubate 10 minutes on ice
- Add 850 µl bidest. water
- Add 200 µl 70 % TCA and incubate for 20 min on ice
- Centrifuge for 15 minutes at 4 °C (20000xg)
- Wash pellet with aceton and centrifuge for 15 minutes at 4 °C
- Repeat the latter step until the chlorophyll is washed out
- Dry pellet at room temperature
- Resuspend in 8 M urea-buffer
- Shake the samples for 15 min at 60 °C
- Load samples on a 12 % SDS gel
Load samples on the gel
Run gel for at least 1 h (120V)
- Mini-Protean Tetra Cell (Biorad)
Blotting on a nitrocellulose membrane over night (20 V)
Submerge blot in 4 % milk powder in TBST
Incubate for 2 h at 4 °C
Incubate membrane for 1-2 h with the milk and the primary antibody against GFP and tubulin (dilution: 1:1000 GFP, 1:2000 tubulin)
Wash membrane in TBST for 10 min (3 times)
Incubate for 1 h at 4 °C with the secondary antibody in milk-TBST (goat anti mouse HRP)
Wash for 10 min at 4 °C in TBST (3 times)
Detection in western imager station (chemocam)
- ECL-solution:incubate membrane for 1 min in ECL solution

Team:Marburg/Notebook:September

From 2013.igem.org

Notebook: September