From 2013.igem.org

(Difference between revisions)

Latest revision as of 09:42, 18 October 2013

Methylmalonyl-CoA Pathway. Making the whole thing work.

Week 6

In this week the first experiments for the genomic integration of the methyl-malonyl-CoA synthetase were set up. First of all the plasmids were transformed into TOP10 grown and purified. The first attempts on the amplification of the fragment didn't work at all and we ended up with a specific product of the wrong size.

Week 7

After a validation of the template plasmid via restriction digest the PCR reaction was optimised. Unfortunately none of the cells transformed with the PCR product using electroporation could be positively screened, no matter how the PCR fragment was amplified.

Week 8

As the repetition of the colony PCR under different conditions was still negative, new PCR products were prepared and pooled. To eliminate possible errors fresh competent cells were prepared.

Week 9

After doing colony PCR again and getting inconclusive results, it was decided that the genomic integration failed using this experimental setup. Thus we started from scratch using a new primer pair and finally it turned out that the polymerase was causing the problems. By the end of the week BAP1-pKD46 could be transformed.

Week 10

Even after running several colony PCRs there were no positive clones to be found. Thus the pKD46 was digested for validation. On the gel a miniprep from the PCR-transformed cells was included. The identity of the pKD46 was fine and the miniprep didn't contain any DNA, as expected.

Week 11

In this week the whole procedure was repeated again from fragment amplification to extensive colony PCR. This week several different colony types were encountered and one that grew only after 3 days actually gave a band at 1.2 kb, but it turned out to be unspecific.

Week 12

Several possible error sources such as unselective plates were investigated, but all turned out to be fine. The colony PCR was then repeated using yet another primer pair, but it still only gave unspecific or no bands.

Week 13

In order to check whether the cell line used was actually the right one primers against sfp were used and cell from other subgroups were included. It turned out that something really weird was going onwith the cells, since sfp could not be detected. Thus the entirely new strategy of generating a plasmid instead of doing genomic integration was initialised.

Week 14

To be really sure about the sfp a new plasmid preparation was made and cells were tranformed again. In parallel the pLF03 was also prepared and sent for sequencing. It turned out, that there is a deletion in the sequence and thus the primers can't bind properly.

Week 15

A final try on integrating the methyl-malonyl-CoA pathway was made. At the same time new plasmids carrying the pathway arrived and had to be validated first via PCR and restriction digestion. Several PCR reaction were run and also the first Gibson assembly and transformation was done for both plasmids. The positive colonies were sent for sequencing by the end of the week.

Week 16

After finally giving up on the genomic integration we focused on the plasmid strategy, where the sequencing results of the two plasmids arrived. As they were already positive glycerol stocks were prepared.

Week 17

In order to check for sfp expression pMM64, carrying an indigoidine synthetase was cotransformed, but didn't give any blue colonies. Thus the plasmid backbone had to be changed to allow for cotransformation with our own indigoidine construct. One of the new plasmids was sent for sequencing.

Week 18

The sequencing results of pIK1.3 revealed a point mutation in the permeability device. All the other plasmids sent for sequencing also carried some kind of mutation that introduced a stop codon within the permeability device, which is thus non-functional. Moreover there were still no blue colonies even though we now used our own construct.

Week 19

After doing some research in 2007's Cambridge team wiki it was found, that the permeability device is probably toxic to the cells and can thus only be succesfully cloned behind a very weak promotor.

Week 20

This week we grew the first blue colonies with an updated version of the indigoidine construct. We also put the permeability device behind a very weak promotor and prepared new plasmids for sequencing.

Week 21

When the sequencing results were analysed there were no mutations in the permeability device. Now the cloning of the plasmids for the parts submission started and by the end of the week we sent them for sequening.

Week 22

Unfortunately we noticed that we accidentally introduced an additional restriction site and could thus not submit the part to the registry. We already removed the restriction site and validated it by restriction digestion. Anyway we are going to try different restriction enzymes and send it for sequencing after wiki freeze.

Goal

Vector map of the pKD46 plasmid. pKD20 was used in the original publication, but pKD46, constructed by the same authors, shows higher recombination efficiency and is the one used in all recombination experiments.

Vector map of the pET-21c plasmid.

MCS of pET-21c with the binding sites of the IK07, IK08, and IK02 primers highlighted.

Integration of the methylmalonyl-CoA sythesis pathway into the BAP1 genome. This is a reproduction of a part of <bib id="pmid17959404"/>. For the integration, the λ-red protocol established by Datsenko and Wanner<bib id="pmid10829079"/> is used. pKD20/pKD46 plasmids contain the λ-red genes begind an arabinose inducible promoter, a temperature-sensitive origin, and an ampicillin selection marker. The part to be integrated is on the pLF03 plasmid, which is identical to pYW201<bib id="pmid17959404"/> in every way except for the selection marker in the insert (pYW201 has kanamycin resistance, pLF03 chloramphenicol). pLF03 contains an ampicillin marker that is expressed constitutively, chloramphenicol is only used to test for successful integration, as it is behind an IPTG-inducible T7 promoter (as are the other two genes, pccB and accA1). pLF03 is derived from pET-21c. The expected amplificate size for PCR of pLF03 is 4kb. pccB-accA will replace the ygfG gene in the BAP1 genome.

BL21-DE3 genomic region around ygfG, which will be replaced by pccB-accA in BAP1. Sites homologous to ygfG21C1 and ygfG21C2 as well as the IK01 primer binding site are shown.

2013-06-03

inoculate 50 ml LB with BAP1, grow at 37°C until OD=0.57
prepare BAP1 glycerol stocks
prepare competent BAP1
recover pKD46, pCP20, pLF03
transform TOP10 with pKD46, plate on Amp, grow at 30°C
transform TOP10 with pLF03, plate on Amp, grow at 37°C
transform TOP10 with pCP20, plate on Amp, grow at 30°C

2013-06-04

inoculate 4 ml LB+Amp with TOP10-pLF03, grow at 37°C
make miniPrep of pLF03 => 97 ng/µl in 27 µl
transform BAP1 with pKD46, plate on Amp, grow at 30°C

2013-06-05

prepare 50 ml LB + Amp + Arabinose(0.1%), inoculate with BAP1-pKD46
prepare 4 ml LB + Amp, inoculate with TOP10-pKD46 (for miniPrep)
no colonies with pCP20 => repeat transformation with three times the amount of plasmid (30 µl)
BAP1-pKD46 reached OD=0.68 at 22:30 => put in fridge over night

2013-06-06

inoculate 50 ml LB + Amp + Arabinose(0.1%) with 500 µl BAP1-pKD46 from ON culture (fridge)
at OD=0.49: make glycerol stocks, prepare electrocompetent BAP1-pKD46
make miniPrep of TOP10-pKD46 ON culture -> 31 ng/µl
low yield of TOP10 miniPrep: make 2 miniPreps of BAP1-pKD46 ON culture -> 45.5 ng/µl and 46.0 ng/µl
evening: no colonies with pCP20 -> write Lei Fang (Pfeifer lab) -> their stock is bad, we should get pCP20 somewhere else

2013-06-07

Gel electrophoresis of the PCR amplificate. Left: NEB 2 log DNA ladder; middle: PCR without annealing step; right: full PCR

run PCR of 5 ng pLF03 (1 µl 1:20 dilution of miniPrep from 2013-06-04) of with primers ygfG21C1 and ygfG21C2 using Phusion polymerase:

Cycles	temperature [°C]	Time [s]
1	98	30
30	98	10
	66	30
	72	90
1	72	450
1	4	inf

using hot start at 98°C
two PCR samples were run, in one the annealing step at 66°C was left out
=> no amplificate

2013-06-08

Gel electrophoresis of the PCR amplificate. Left: NEB 2 log DNA ladder; middle: full PCR; right: PCR without 58°C annealing step

Looking in more detail at the primers, the parts binding to the template have melting temperatures of 40 and 45°C (the rest is homologous to E. coli genome for recombination)
run PCR of 5 ng pLF03 (1 µl 1:20 dilution of miniPrep from 2013-06-04) with primers ygfG21C1 and ygfG21C2 using Phusion polymerase:

Cycles	temperature [°C]	Time [s]
1	98	30
5	98	10
	39	45
	72	90
5	98	10
	45	45
	72	90
20	98	10
	58	45
	72	90
1	4	inf

using hot start at 98°C
two PCR samples were run, in one the annealing step at 58°C was left out
=> no amplificate

2013-06-09

Gel electrophoresis of the PCR amplificate. Left: NEB 2 log DNA ladder; right: PCR product

run PCR of 5 ng pLF03 (1 µl 1:20 dilution of miniPrep from 2013-06-04) with primers ygfG21C1 and ygfG21C2 using Phusion polymerase:

Cycles	temperature [°C]	Time [s]
1	98	30
35	98	10
	40	60
	72	120
1	72	600
1	4	inf

using hot start at 98°C
amplificate has 1.3kb -> too short, but specific (one distinct band)

Lab book: genomic integration

2013-06-10

Gel electrophoresis of the pLF03 digestion. Left: NEB 2 log DNA ladder; middle: digestion with EcoRI, right: digestion with XhoI+NdeI

need to verify plasmid identity: digest pLF03 with EcoRI (for linearization) and XhoI+NdeI (verify insert size); 388 ng (4 µl of miniPrep from 2013-06-04) each
insert only 3.3 kb in length, expected >4 kb (AccA1: 590AS * 3 = 1770 bp, PccB: 530AS * 3 = 1590 bp, CatR: 219 AS = 657 bp; adds up to 4017 bp, not counting RBS and spacers between the individual genes)
contacted Lei Fang (Pfeifer Lab), there are NdeI and EcoRI sites in catR (they were not indicated in his plasmid map)
to verify presence of chloramphenicol acetyl transferase in insert: transform BAP1 with 97 ng pLF03 (1 µl of miniPrep from 2013-06-04), plate on Amp + IPTG
evening: pick BAP1-pLF03 colonies, transfer to Cm + IPTG
inoculate 4 and 5 ml of liquid culture (Amp) with BAP1-pLF03

2013-06-11

Gel electrophoresis of the PCR amplificate. Lane 1: NEB 2-log ladder; lane 2: PCR with Phusion Flash; lane 3: PCR with Taq at 43°C annealing temperature; lane 4: PCR with Taq at 41.5°C annealing temperature

BAP1-pLF03 grew on Cm + IPTG
try to optimize PCR:
run PCR of 5 ng pLF03 (1 µl 1:20 dilution of miniPrep from 2013-06-04) with primers ygfG21C1 and ygfG21C2 using Phusion Flash F548 polymerase (performed by Dominik):

Cycles	temperature [°C]	Time [s]
1	98	10
5	98	1
	45	5
	72	120
25	98	1
	55	5
	72	120
1	72	120
1	4	inf

run PCR of 5 ng pLF03 (1 µl 1:20 dilution of miniPrep from 2013-06-04) with primers ygfG21C1 and ygfG21C2 using Taq polymerase (cheaper):

Cycles	temperature [°C]	Time [s]
1	94	180
35	94	20
	41.5/43	60
	72	480
1	72	300
1	4	inf

prepare glycerol stock of BAP1-pLF03
make miniPreps of BAP1-pLF03 -> 21 ng / µl and 27 ng / µl in 27.5 µl

received just plated DH5α-pCP20 from Sourjik Lab, grow at 30°C

2013-06-12

purify Phusion Flash PCR product with Qiagen PCR purification kit -> 120 ng / µl in 27.5 µl
inoculate 2 x 5 ml LB + Amp with DH5α-pCP20, grow at 30°C

2013-06-13

miniPreps of DH5α-pCP20 -> 7.8 ng / µl and 14.6 ng / µl in 27.5 µl, respectively
low yield of miniPreps: inoculate 2 x 5 ml LB + Amp with DH5α-pCP20, grow at 30°C

2013-06-14

miniPreps of DH5α-pCP20 -> 25 ng / µl and 29 ng / µl in 27.5 µl, respectively
prepare glycerol stocks of DH5α-pCP20
to avoid electroporation with intact pLF03: add 10 µl of PCR amplificate (1.2 mg) on gel, perform gel extraction (QiaGen gel extraction kit) -> 3.2 ng / µl
add 240 ng (2 µl) raw PCR product to 100 µl electrocompetent BAP1-pKD46
add 16 ng (5 µl) gel-extracted PCR product to 100 µl electrocompetent BAP1-pKD46
electroporate 50 µl each, add to 1 ml SOC with 1 mM IPTG
shake at 300 rpm, 37°C for 1 h
spin cells down (3 min 10 000 rpm = 8000 g), decant supernatant (leave about 200 µl supernatant in eppendorf tube)
resuspend pellet, plate 100 µl on Cm-IPTG, leave rest at RT
grow at 37°C

2013-06-15

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG. Lane 1: NEB 2-log; lane 2: negative control (BAP1-pLF03); rest: colony-PCRs from PCR-purified plate.

one colony on plate with gel-extracted PCR product
many colonies on plate with PCR-purified PCR product
pick colonies from plate with PCR-purified PCR product, run colony-PCR (Taq, 25 µl total volume) with primers IK01 and IK02 (expected product: 465 bp):

Cycles	temperature [°C]	Time [s]
1	95	180
30	95	30
	61	30
	72	30
1	72	600
1	4	inf

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG. Lane 1: NEB 2-log; lane 2: negative control (BAP1-pLF03); lane 3: colony-PCR of colony electroporated with gel-extracted PCR product; rest: colony-PCRs of colonies electroporated with PCR-purified PCR product.

no product -> pick colony from gel-extracted plate, pick colonies from PCR-purified plate, run colony-PCR (Taq, 25 µl total volume) with primers IK01 and IK02:

Cycles	temperature [°C]	Time [s]
1	95	240
30	95	30
	61	30
	72	30
1	72	600
1	4	inf

no product -> 2 possibilities:
1. all colonies bear complete pLF03 plasmid (PCR was run with 5 ng template, DNA concentration in PCR product: 120 ng / µl, electroporated with 2 µl -> 1/6 ng pL03 vs. 240 ng amplificate)
2. PCR did not work
for colony from gel-extracted plate + 3 colonies from PCR-purified plate: add up to 3 ml medium, add IPTG (1 mM) + Cm, grow at 37°C
plate rest of bacteria electroporated with gel-extracted PCR product on Cm + IPTG

2013-06-16

miniPrep of BAP1-pKD46 electroporated with PCR product from pLF03. Lane 1: NEB 2-log; lane 2: miniPrep of colony electroporated with gel-extracted product; rest: miniPreps of colonies electroporated with PCR-purified product.

no colonies on gel-extracted plate
make miniPreps of ON cultures, run gel
pLF03: 9.2 kb, bands above 10 kb, bands smear, low intensity (applied all 30 µl of miniPrep to gel) -> fragments of genomic DNA?
=> PCR went wrong?

Lab book: genomic integration

2013-06-17

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG. Lanes 1-6: annealing at 66°C; lanes 8-11: touch-down 66->60°C; lane 6: NEB 2-log; lane 1,7: negative control (BAP1-pLF03); lane 2,8: colony-PCR of colony electroporated with gel-extracted PCR product; rest: colony-PCRs of colonies electroporated with PCR-purified PCR product.

repeat colony PCR, use 1 µl of liquid culture from gel-extracted plate, pick colonies from PCR-purified plate (Taq, 25 µl total volume)
2 conditions:

Cycles	temperature [°C]	Time [s]
1	95	600
30	95	240
	64	30
	72	60
1	72	600
1	4	inf

Cycles	temperature [°C]	Time [s]
1	95	600
12	95	240
	66°C ↓0.5°C	30
	72	60
18	95	240
	60°C	30
	72	60
1	72	600
1	4	inf

no positives
plate samples of liquid cultures from 2013-06-15 on Amp, grow at 37°C

2013-06-18

colonies grew on Amp

2013-06-19

Gel electrophoresis of the PCR amplificate. Lane 1: NEB 2-log ladder; lanes 2-5: PCR with Phusion Flash (2 µl of product were put on gel)

prepare for repetition of experiment: run 4 PCRs of 1 ng pLF03 (miniPrep from 2013-06-04) with primers ygfG21C1 and ygfG21C2 using Phusion Flash (performed by Dominik), one reaction = 50 µl total volume

Cycles	temperature [°C]	Time [s]
1	98	10
5	98	1
	45	5
	72	130
25	98	1
	55	5
	72	120
1	72	120
1	4	inf

Gel electrophoresis of the purified PCR amplificate. Lane 1: NEB 2-log ladder; lane 2: purified PCR with Phusion Flash (1 µl of product were put on gel)

pool products, purify (digestion only 3 h)
nanoDrop: 2088 ng/µl -> remeasure: 532 ng/µl
load 1 µl purified PCR product on gel -> very weak band -> nanoDrop wrong
to eliminate error: make fresh electrocompetent cells:
- pick colony from BAP1-pKD46 plate from 2013-06-04
- inoculate 1 ml LB + Amp
- grow at 30°C

2013-06-20

too little cells: use aliquot from 2013-06-06
use all available DNA (14 µl) and 100 µl cells (complete aliquot)
grow in SOC + IPTG(1mM) at 300 rpm for 3h
spin cells down, decant supernatant, resuspend in remainder of medium
plate 10 µl, rest on Cm + IPTG

Lab book: genomic integration

2013-06-24

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG. Lane 1: NEB 2-log; lanes 2-4: negative control (BAP1-pLF03); lanes 5-10: colony-PCR of colony electroporated with purified PCR product; lanes 2,5,8: primers IK01+IK02; lanes 3,6,9: primers IK01+IK03 (positive control); lanes 4,7,10: primers IK05+IK06 (negative control)

no colonies on 10 µl plate, 2 colonies on rest plate
colony-PCR using primer pairs IK01+IK02, IK01+IK03 (positive control), IK05+IK06 (negative control) (Taq, 20 µl total volume)

Cycles	temperature [°C]	Time [s]
1	95	300
30	95	60
	62	30
	72	60
1	72	600
1	4	inf

inconclusive results: no band for IK05+IK06 in BAP1-pLF03 (negative control)
grow liquid cultures at 37°C

2013-06-25

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG and then in LB ON. Lane 1: NEB 2-log; lanes 2-5: negative control (BAP1-pLF03); lanes 6-13: colony-PCR of colonies electroporated with purified PCR product; lanes 2,6,10: primers IK01+IK02; lanes 3,7,11: primers IK01+IK03 (positive control); lanes 4,8,12: primers IK05+IK06 (negative control); lanes 5,9,13: primers IK01+IK06 (negative control)

repeat PCR with 1 µl of ON cultures:

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	120 (IK01+IK02; IK01+IK03;IK05+IK06) / 240 (IK01+IK06)
18	95	60
	62	30
	72	120 (IK01+IK02; IK01+IK03;IK05+IK06) / 240 (IK01+IK06)
1	72	600
1	4	inf

genomic integration failed
pick colony from BAP1-pKD46 plate from 2013-06-04, grow in 3 ml LB+Amp at 30°C

2013-06-26

inoculate 50 ml LB + Amp + Ara(0.5%) with 1.1 ml of ON culture
grow at 30°C to OD=0.73, prepare electrocompetent BAP1-pKD46

2013-06-27

Gel electrophoresis of the PCR amplificate. Lane 1: NEB 2-log ladder; lane 2: 1 µl of PCR amplificate (first PCR)

Gel electrophoresis of the PCR amplificate. Lane 1: NEB 2-log ladder; lane 2: 1 µl of PCR amplificate (second PCR)

Gel electrophoresis of the PCR amplificate. Lane 1: 19 µl of amplificate from first PCR; lane 2: 19 µl of amplificate from second PCR; lane 3: NEB 2-log ladder; lane 4: 1 µl of PCR amplificate (third PCR)

run PCR of 5 ng pLF03 (1 µl 1:20 dilution of miniPrep from 2013-06-04) with primers IK07 and IK08 using Phusion polymerase (20 µl total volume) on cycler 1 (does not cool down to 4°C) (using hot start):

Cycles	temperature [°C]	Time [s]
1	98	30
30	98	5
	66	30
	72	150
1	72	600
1	4	inf

no product -> repeat PCR with cycler 2 (fully functional)
no product -> run 2-step PCR with 4 ng pLF03 (0.2 µl of 21 ng/µl miniPrep from 2013-06-11) with primers IK07 and IK08 using Phusion polymerase (20 µl total volume, using hot start) on cycler 2:

Cycles	temperature [°C]	Time [s]
1	98	30
30	98	5
	72	150
	1	72	600
1	4	inf

no product

2013-06-28

Gel electrophoresis of the PCR amplificate. Lane 1: NEB 2-log ladder; lane 2: 1 µl of PCR amplificate

run PCR of 4 ng pLF03 (0.2 µl of 21 ng/µl miniPrep from 2013-06-11) with primers IK07 and IK08 using Q5 polymerase (20 µl total volume, using hot start) on cycler 2:

Cycles	temperature [°C]	Time [s]
1	98	30
30	98	5
	66	30
	72	150
1	72	1800 (30 min)
1	4	inf

perfect PCR => Phusion is crappy
run 4 PCRs of 4 ng pLF03 (0.2 µl of 21 ng/µl miniPrep from 2013-06-11) with primers IK07 and IK08 using Q5 polymerase (50 µl total volume, using hot start) on cycler 2:

Cycles	temperature [°C]	Time [s]
1	98	30
45	98	5
	66	30
	72	150
1	72	1800 (30 min)
1	4	inf

2013-06-29

Gel electrophoresis of the PCR amplificate. Lane 1: NEB 2-log ladder; lanes 2-5: 1 µl of PCR amplificate

load 1 µl of PCR product on gel -> specific amplificate
pool products (also include amplificate from 2013-06-28), purify (only first step, as no DpnI available)

2013-06-30

inoculate 1 ml LB+Amp with 10 µl of ON culture from 2013-06-25, grow at 30°C

Lab book: genomic integration

2013-07-01

finish purification (digest for 5h, dissolve in 50 µl H₂O) -> 1162 ng/µl (performed by Fanny)
prepare electrocompetent cells from ON culture (add 0.5% arabinose at dilution) (performed by Fanny)
electroporate fresh electrocompetent cells, 1 aliquot from 2013-06-26 (23 µl DNA each) (performed by Fanny)
grow in SOC at 30°C for 30 min, transfer to falcons, add 1 ml LB, add IPTG (1 mM), grow at 37°C for 4h
spin cell down (8000 rcf for 3 min), decant supernatant, resuspend pellet in remaining medium
plate on Cm+IPTG (2 plates for each sample: 10µl + rest, plates marked F: from -80°C, marked H: newly prepared cells), grow at 37°C

2013-07-02

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG. Lane 1: NEB 2-log; lanes 2, 3: negative control (BAP1-pLF03); lanes 4-9: colony-PCR of F-rest (lanes 8,9: from lawn); lanes 10-13: colony-PCR of H-10µl; lanes 2,4,6,8,10,12: primers IK01+IK02; lanes 3,5,7,9,11,13: primers IK01+IK03 (positive control)

bacteria lawn on rest-plate from -80°C, possible colonies on other plates (barely visible, may be bubbles)
pick 2 colonies from F-rest, sample of lawn, 2 colonies from H-10µl, colony-PCR with primers IK01+IK02, IK01+IK03 (positive control) (20µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	120
18	95	60
	62	30
	72	120
1	72	600
1	4	inf

very evening: colonies on F-10µl, H-rest, H-10µl plates appear -> leave at 37°C ON

2013-07-03

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG.
Lane 1: NEB 2-log
Top: lanes 2-4: negative control (BAP1-pLF03); lanes 5-13: colony-PCR F-10µl
bottom:lanes 2-4: colony-PCR of F-10µl; lanes 5-13: colony-PCR of H-10µl; lanes 2,5,11: primers IK01+IK02; lanes 3,6,12: primers IK01+IK03 (positive control); lanes 4,7,13: primers IK05+IK06 (negative control)

colonies on F-rest plate appeared (plate left ON at RT)
pick 4 colonies from F-10µl, 3 colonies from H-10µl, colony-PCR with primers IK01+IK02, IK01+IK03 (positive control), IK05+IK06 (negative control):

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	120
18	95	60
	62	30
	72	120
1	72	600
1	4	inf

F-10µl 1,2,4 show no negative control -> grow at 37°C
continue growing plates at 37°C until evening, leave at RT ON

2013-07-04

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG.
Lane 1: NEB 2-log
Top: lanes 2-10: cultures from 2013-07-03; lanes 2,5,8: primers IK01+IK02; lanes 3,6,9: primers IK01+IK03; lanes 4,7,10: primers IK05+IK06; lane 11: BAP1-pLF03 (negative control); lanes 12-13: colonies from F-10µl plate; lanes 11-13: primers IK05+IK06
bottom: lanes 2-13: primers IK05+IK06; lanes 2,3: colonies from F-10µl plate; lanes 4-6: colonies from F-rest plate; lanes 7-10: colonies from H-10µl plate; lanes 11-13: colonies from H-rest plate

repeat colony-PCR for 3 ambiguous cultures form 2013-07-03 (use 1 µl of culture), pick 14 new colonies (only primers IK05+IK06); 20 µl total volume:

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	120
18	95	60
	62	30
	72	120
1	72	600
1	4	inf

no positives

2013-07-05

Restriction digest of pKD46. Lane 1: NEB 2-log; lane 2: EcoRI; lane 3: BamHI+NotI; lane 4: PstI+NotI; lane 5: undigested (225 ng (5 ml) loaded)

digest 450 ng pKD46 (10 µl of 45.5 and 46 ng/µl miniPreps from 2013-06-06) with EcoRI (expected: 4816+1505 bp), BamHI+NotI (expected: 3675+2646 bp), PstI+NotI (expected: 3711+2363+243 bp); 30 µl total volume
right plasmid
inoculate 2 x 7 ml LB+Cm+IPTG(1mM) with colonies from F-10µl plate, grow at 30°C

2013-07-06

Restriction digest of BAP1-pKD46 electroporated with pLF03-PCR grown in Cm+IPTG(1mM), miniprepped.
Lane 1: NEB 2-log; lanes 2-5: Konrad's PCR; lane 6: digested with EcoRI; lane 8: undigested

add Cm (1:3000), IPTG (1:1000) to liquid cultures, grow for 8h at 30°C
make miniPreps -> 25 ng/µl and 14.4 ng/µl in 27.5 µl
digest 25 ng/µl miniPrep with EcoRI (use all of miniPrep)
load digest completely, 10 µl of 14.4 ng/µl miniPrep on gel
no bands -> nanoDrop crappy, no plasmid
wrong strain? Streak BAP1 on Cm, grow at 37°C

Lab book: genomic integration

2013-07-08

gel electrophoresis of PCR of pLF03 with primers IK07 and IK08 using Q5 polymerase. Product from one PCR tube was split to two neighboring lanes.

1 µl of gel-extracted PCR amplificate was loaded. Lane 1: NEB 2-log; lane 2: amplificate extracted by Dominik, lane 3: amplificate extracted by Ilia

no colonies of BAP1 on Cm
repeat PCR of pLF03:
run 4 PCRs of 4 ng pLF03 (0.2 µl of 21 ng/µl miniPrep from 2013-06-11) with primers IK07 and IK08 using Q5 polymerase (50 µl total volume):

Cycles	temperature [°C]	Time [s]
1	98	30
45	98	5
	66	30
	72	150
1	72	1800 (30 min)
1	4	inf

extract amplificate from gel (4 lanes pooled, extracted by Dominik -> 119 ng/µl; 4 lanes pooled, extracted by Ilia -> 111.5 ng/µl)
load 1 µl of each extract on gel

2013-07-09

electroporate electrocompetent BAP1-pKD46 with 1µl, 5µl, 25µl DNA
resuspend in 1 ml SOC + IPTG (1mM) + Ara (0.1%)
grow for 90 min at 37°C, 400 rpm
spin cells down, plate 10µl, rest of each sample on Cm+IPTG

2013-07-10

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG with primers IK05+IK06. Lane 1: NEB 2-log; lanes 2, 13: BAP1-pLF03 (control); lanes 3-12: colony-PCRs of large colonies from 25µl/10µl plate. Lanes 2-12: OneTaq; lane 13: iTaq

on all plates: large + small colonies
small colonies too small to pick => pick 10 large colonies from 25µl DNA / 10 µl bacteria plate, run colony-PCR with primers IK05+IK06 (Taq, 20 µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	120
18	95	60
	62	30
	72	120
1	72	600
1	4	inf

no integration
continue growing plates at 37°C

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG.
Top: lane 1: NEB 2-log; lanes 2,4,6,8,10,12: primers IK05+IK06; lanes 3,5,7,9,11,13: primers IK01+IK03 (positive control); lanes 2,3: BAP1-pLF03 (control); lanes 4-7: colonies from 1µl/10µl plate; lanes 8-11: 1µl/rest; lanes 12-13: 5µl/10µl
Bottom: lane 11: NEB 2-log; lanes 1,3,5,7,9: primers IK05+IK06; lanes 2,4,6,8,10: primers IK01+IK03 (positive control); lanes 1-2: 5µl/10µl; lanes 3-6: 5µl/rest; lanes 7-8: 25µl/10µl; lanes 9-10: 25µl/rest

when small colonies large enough: pick, run colony-PCR (OneTaq, 20µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	120
23	95	60
	62	30
	72	120
1	72	600
1	4	inf

1st colony from 5µl/rest plate (marked 7) seems promising => grow at 37°C in 1 ml LB

2013-07-11

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG and then in LB at 37°C. Lanes 1,4: primers IK01+IK03 (positive control); lanes 2,5: primers IK01+IK02; lanes 3,6: primers IK05+IK06; lanes 1-3: BAP1-pLF03 (control); lanes 4-6: colony 7; lane 7: NEB 2-log

run full colony-PCR of liquid culture (OneTaq, 20 µl total volume, use 1 µl of culture):

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	120
18	95	60
	62	30
	72	120
1	72	600
1	4	inf

no integration
3rd population of colonies appeared on plates (stored at RT): very small, probably satellites

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG and then in LB at 37°C with primers IK07+IK08. Lane 1: NEB 2-log; lane 2: BAP1-pLF03 (control); lane 3: large colony picked from 25µl/10µl plate; lane 4: colony marked 1 from 1µl/10µl plate; lane 5: colony marked 6 from 5µl/10µl plate; lane 6: colony marked 7 from 5µl/rest plate.

run colony-PCR of liquid with primers IK07+IK08 (test for integration in wrong place) (OneTaq, 20µl total volume, use 1 µl liquid culture):

Cycles	temperature [°C]	Time [s]
1	95	300
30	95	60
	66	30
	72	600
1	72	600
1	12	inf

no integration at all

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG with primers IK05+IK06.
Top: lane 1: NEB 2-log; lane 2: BAP1-pLF03(control); lanes 3-9: colonies from 1µl/10µl plate; lanes 10-13: colonies from 1µl/rest plate
Bottom: lane 1: NEB 2-log; lanes 2-10: colonies from 1µl/rest plate (lane 5: swiped 3rd population of extremely small colonies)

pick 20 new colonies, run colony-PCR with primers IK05+IK06 (iTaq, 20 µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	120
23	95	60
	62	30
	72	120
1	72	600
1	4	inf

unspecific bands (also present in colony-PCR from 2013-07-10)
unspecific bands not present in BAP1-pLF03 PCR (control) and bottom lane 5 (satellite colonies) => not due to iTaq
assume: some amount of satellites was picked together with colonies from plates -> give band at 500 bp; partially amplified ygfG fragments prime integrated insert
do multiple sequence alignment of ygfG, pccB, accA1, and catR using ClustalO => long enough stretches of partially identical sequences present
add 1mM IPTG to cultures with colonies from 1µl/10µl plate picked today (grew in 500 µl LB at 37°C for several hours), after 2h at 37°C: streak on Cm+IPTG
pick 10 colonies each from 1µl/10µl and 1µl/rest plates, transfer to new Cm+IPTG plate, grow at 37°C
pick 1 colony from 1µl/10µl plate, inoculate 1 ml LB + Cm + IPTG (1mM)

2013-07-12

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG with primers IK01+IK02.
Top: lane 1: NEB 2-log; lane 2: BAP1-pLF03(control); lanes 3-12: colonies liquid culture that were plated on Cm+IPTG; lane 13: colony from 1µl/10µl plate that was transferred to new Cm+IPTG plate
Bottom: lane 1: NEB 2-log; lanes 2-6: colonies from 1µl/10µl plate that were transferred to new Cm+IPTG plate; lanes 7-12: colonies from 1µl/rest plate that were transferred to new Cm+IPTG plate; lane 13: liquid culture (Cm+IPTG(1mM)) from 1µl/10µl plate

colonies grew slowly
run colony-PCR with primers IK01+IK02 (iTaq, 20 µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	120
23	95	60
	62	30
	72	120
1	72	600
1	4	inf

no bands

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG, grown in liquid culture and then transferred to Cm+IPTG with primers IK05+IK06. Lane 1: NEB 2-log; lane 2: BAP1-pLF03 (control); lanes 3-4: colony-PCRs (from colonies marked 1 and 2)

run colony-PCR with primers IK05+IK06 of 2 colonies from liquid culture that were transferred to Cm + IPTG plate (iTaq, 20µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	120
23	95	60
	62	30
	72	120
1	72	600
1	4	inf

band at 1.2 kb is now specific -> WTF?!?

2013-07-13

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG, grown in liquid culture and then transferred to Cm+IPTG (marked 2) with primers IK05+IK06. Lane 1: NEB 2-log; lanes 2,4,6,8,10,12: BAP1-pLF03 (control); lanes 3,5,7,9,11,13: colony-PCR; lanes 2,3: annealing at 63°C; lanes 4,5: 64°C; lanes 6,7: 65°C; lanes 8,9: 66°C; lanes 10,11: 67°C; lanes 12,13: 68°C.

need to determine whether 1.2 kb band is specific: run gradient PCR of colony 2 (iTaq, 20 µl total volume) with primers IK05+IK06:

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	60
	63-68 (ΔT = 1)	30
	72	120
1	72	600
1	4	inf

intensity of 1.2kb band decreases, intensity of 0.5 kb band (control) does not -> 1.2 kb band is unspecific product
check for presence of genomically integrated insert: run colony-PCR of colony 2 with primers IK07+IK08 (iTaq, 20 µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	60
	66	30
	72	600
1	72	600
1	12	inf

transfer some of colony 2 on Amp (check for presence of pLF03 as a whole), grow at 37°C
transfer some of colony 2 to liquid culture: LB + Cm + IPTG (1mM), grow at 37°C

2013-07-14

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG, grown in liquid culture and then transferred to Cm+IPTG (marked 2) with primers IK07+IK08. Lane 1: NEB 2-log; lane 2: BAP1-pLF03 (control); lane 3: colony-PCR

bacteria grew on Amp => 3 possibilities:
- Amp plates not selective
- bacteria have complete pLF03 plasmid
- bacteria still have pKD46, although grown at 37°C
plate BAP1, BAP1-pKD46 on Amp, grow at 37°C
colony-PCR did not work for the control -> repeat with OneTaq (use 1 µl of liquid culture)
no amplificate for colony: possibly, Taq has problems amplifying 4.8 kb from genomic DNA

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG, grown in liquid culture and then transferred to Cm+IPTG (marked 2) and grown in liquid culture with Cm+IPTG(1mM). Lane 3: NEB 2-log; lanes 1,4: BAP1-pLF03 (control); lanes 2,5: 1 µl of liquid culture; lanes 1,2: primers IK07+IK08; lanes 4,5: primers IK01+IK06

run colony-PCR with primers IK01+IK06 (OneTaq, 20 µl total volume, use 1 µl of liquid culture):

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	240
23	95	60
	62	30
	72	240
1	72	600
1	4	inf

control shows bright band where expected, colony does not => something is integrated, unknown what

Lab book genomic integration

2013-07-15

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG, grown in liquid culture and then transferred to Cm+IPTG (marked 2) and grown in liquid culture with Cm+IPTG(1mM) with primers IK07+IK08. Lane 1: NEB 2-log; lane 2: BAP1-pLF03 (control); lane 3: 1 µl of liquid culture.

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG, grown in liquid culture and then transferred to Cm+IPTG (marked 2) with primers IK07+IK08. Lane 1: NEB 2-log; lane 2: BAP1-pLF03 (control); lane 3: 1 µl of liquid culture.

BAP1 did not grow on Amp, BAP1-pKD46 did grow on Amp at 37°C => no discrimination between pLF03 and pKD46 possible
Taq might have problems amplifying 4.8 kb from genomic DNA => use Phusion Flash (primers IK07+IK08, 20 µl total volume, use 1 µl of liquid culture, old BioRad cycler):

Cycles	temperature [°C]	Time [s]
1	98	10
35	98	1
	66	5
	72	100
1	72	600
1	12	inf

control did not work -> repeat in new BioRad cycler (pick from plate)
same result

2013-07-18

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG, grown in liquid culture and then transferred to Cm+IPTG (marked 2). Lane 1: NEB 2-log; lanes 2,4,6: BAP1-pLF03 (control); lanes 3,5,7: colony-PCR. Lanes 2,3: primers IK24+IK25; lanes 4,5: primers IK07+IK25; lanes 6,7: primers IK01+IK25

run colony-PCR with primers IK24, IK25 (OneTaq, 20 µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	180
23	95	60
	62	30
	72	180
1	72	600
1	12	inf

1.2 kb band with primers IK01+IK25 in control => makes no sense, repeat
same result
transfer BAP1-pLF03 to new Cm+IPTG plate, colony 2 to LB w/o antibiotics, grow at 37°c#

2013-07-22

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG, grown in liquid culture and then transferred to Cm+IPTG (marked 2). Lane 1: NEB 2-log; lanes 2,4: BAP1-pLF03 (control); lanes 3,5: colony-PCR. Lanes 2,3: primers IK01+IK03; lanes 4,5: primers RB43+RB44

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG, grown in liquid culture and then transferred to Cm+IPTG (marked 2) with primers RB43+RB44. Lane 1: NEB 2-log; lane 2: BAP1-pLF03 (control); lane 3: colony-PCR; lane 4: streaked BAP1 by Konrad

no positive PCR of colony yet: run colony-PCR with primers IK01+IK03 (iTaq, 20 ml total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	180
23	95	60
	62	30
	72	180
1	72	600
1	12	inf

primers RB43+RB44 (against sfp) iTaq, 20 µl total volume:

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	60
	55	30
	72	180
1	12	inf

unspecific bands in colony, no sfp bands at all
re-run sfp PCR (primers RB43+RB44), include streaked BAP1 by Konrad
sfp present in BAP1, not present in BAP1-pLF03, colony
makes no sense, Konrad streaked his cells from the same batch of competent cells
transfer BAP1, BAP1-pLF03, colony to liquid culture LB, grow at 37°C

2013-07-23

Colony-PCR of BAP1-pKD46 electroporated with PCR amplificate of pLF03 grown on Cm+IPTG, grown in liquid culture and then transferred to Cm+IPTG (marked 2) and grown in liquid culture with primers RB43+RB44. Lane 1: NEB 2-log; lane 2: BAP1-pLF03 (control); lane 3: colony-PCR; lane 4: streaked BAP1 by Konrad, lane 5: BAP1-pMM64-pMM65 from 2013-06-11

run colony-PCR with primers RB43+RB44 (iTaq, 20 µl total volume, use 1 µl of liquid culture)

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	60
	55	30
	72	180
1	72	600
1	12	inf

no sfp present

== Goal ==

Vector map of the pIK1 plasmid.

Vector map of the pIK2 plasmid.

Back-up plan in case the genomic integration does not work. Two plasmids are to be constructed, pIK1 (containing BBa_I746200, pccB-accA, and sfp) and pIK2 (containing pccB-accA and sfp) in the pSB3C5 backbone. 6 fragments are to be amplified:

fragment ID	source	primers	size [kb]
f1	BBa_J04450 in pSB3C5	IK32+IK33	3
f2	BBa_I746200	IK26+IK27	2.3
f3	pccB-accA in pLF03	IK28+IK29	3.4
f4	sfp in BAP1	IK30+IK31	0.7
f5	BBa_J04450 in pSB3C5	IK32+IK35	3
f6	pccB-accA in pLF03	IK34+IK29	3.4

2013-07-22

transform BBa_I746200 in pSB1AK3 (Spring 2012 Distribution Plate 2 Well 15E) in TOP10, plate on Amp
transform BBa_J04450 in pSB3C5 (Spring 2012 Distribution Plate 1 Well 3C) in TOP10, plate on Cm

2013-07-23

pick TOP10-BBa_I746200 colony, inoculate LB+Kan, grow at 37°C
pick TOP10-BBa_J04450 colony, inoculate LB+Cm, grow at 37°C
after 12 hours: add new antibiotics to medium, continue growing at 37°C

2013-07-24

Prepare glycerol stocks
make miniPreps: 11.1 ng/µl (BBa_J04450), 18 ng/µl (BBa_I746200)

2013-07-25

File:Methylmalonyl-PCR2013-07-25 1.png

Lane 1: NEB 2-log; lane 3: f1; lane 4: f2; lane 5: f3; lane 6: f4; lane 7: f5; lane 8: f6

run PCRs (using Q5, 20 µl total volume) using 4 ng of each template (pLF03 miniPrep from 2013-06-11, 21 ng/µl), sfp from Konrad's BAP1 plate:

Cycles	temperature [°C]	Time [s]
1	98	30 (f1,f2,f3,f5,f6) / 300 (f4)
35	98	5
	66 (f1,f2) / 60 (f4) / 61 (f3,f5,f6)	10
	72	120 (f1,f2,f3,f5,f6) / 30(f4)
1	72	600
1	12	inf

did not manage to get f3, f4, f6
repeat: add 1 µl DMSO to reactions:

File:Methylmalonyl-PCR2013-07-25 2.png

Lane 1: NEB 2-log; lane 2: f3; lane 3: f4 with lots of bacteria from new plate; lane 4: f4 with lots of bacteria from old plate; lane 5: f4 with little bacteria from new plate; lane 6: f6

Cycles	temperature [°C]	Time [s]
1	98	30
35	98	5
	56 (f4) / 57 (f3,f6)	30
	72	150 (f3,f6) / 45(f4)
1	72	600
1	10	inf

File:Methylmalonyl-PCR2013-07-25 3.png

Lane 1: NEB 2-log; lane 2: f3; lane 3: f6

use pLF03 miniPrep from 2013-06-11, 27 ng/µl, repeat for f3, f6 (with 1 µl DMSO):

Cycles	temperature [°C]	Time [s]
1	98	30
12	98	10
	62 ↓0.5°C	10
	72	150
23	98	10
	58	10
	72	150
1	72	600
1	10	inf

2013-07-26

File:Methylmalonyl-PCR2013-07-26.png

Lane 1: NEB 2-log; lane 2: f3 with annealing; lane 3: f6 with annealing; lane 4: f6 2-step; lane 5: f3 2-step

run PCR of f3, f6 with Phusion Flash (using pLF03 miniPrep from 2013-06-11, 21 ng/µl), without DMSO:

Cycles	temperature [°C]	Time [s]
1	98	10
35	98	1
	65	5
	72	75
1	72	600
1	10	inf

Cycles	temperature [°C]	Time [s]
1	98	10
5	98	1
	65	5
	72	75
30	98	1
30	72	75
1	72	600
1	10	inf

inoculate 10 ml LB+Amp with TOP10-pLF03, grow for 36h at 37°C, add Amp every 12 hours

2013-07-28

make miniPrep -> very low yield (ca. 1-2 ng/µl)
inoculate 6 ml LB+Amp with TOP10-pLF03, grow at 37°C

Lab book: genomic integration
Lab book: plasmid construction

2013-07-29

inoculate 10 ml 2xYT+Amp with TOP10-pKD46, grow at 30°C

2013-07-31

miniPrep of pKD46. Lane 1: NEB 2-log (5 µl), lane 2: 1 µl of miniPrep

miniPrep of pKD46 -> ca. 10 ng/µl

2013-08-03

transform BAP1 with 5µl of pKD46 miniPrep form 2013-07-31, plate on Amp, grow at 30°C

2013-07-29

1 µl of pLF03 miniPrep from 2013-06-04

make miniPrep -> very low yield (1-2 ng/µl)
load 1µl of 97ng/µl pLF03 miniPrep from 2013-06-04 on gel -> ca. 20 ng/µl
inoculate 50 ml LB+Amp with TOP10-pLF03, grow at 37°C

2013-07-30

1 µl of pLF03 midiPrep from 2013-07-30

make midiPrep -> 1352 ng/µl in 66.5 µl
medium was contaminated (also check with Fanny) -> low yields of previous miniPreps

2013-07-31

send 20 µl of 1:15 dilution of midiPrep to sequencing with primers IK07, IK36, IK37: File:Heidelberg PLF03 seq 2013-07-31.zip
perform multiple sequence alignment against assumed pLF03 sequence: IK07, IK36, IK37
deletion at the end of accA2 -> primer can not bind

Lab book: genomic integration
Lab book: plasmid construction

2013-08-05

run colony-PCR against sfp on BAP1-pKD46 with primers RB43+RB44 (iTaq, 20 µl total volume):

Colony-PCR of BAP1-pKD46 with primers RB43+RB44. Lane 1: sfp, lane 2: NEB 2-log

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	60
	55	30
	72	180
1	72	600
1	10	inf

inoculate 4 ml 2xYT+Amp with BAP1-pKD46, grow at 30°C

2013-08-06

Lane 1: NEB 2-log; lane 3: colony-PCR with primers RB43+RB44

inoculate 50 ml 2xYT+Amp+Ara(0.5%) with BAP1-pKD46, grow at 30°C until OD=0.71
run colony-PCR with primers RB43+RB44 from 50 ml culture:

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	60
	55	30
	72	180
1	72	600
1	10	inf

prepare electrocompetent BAP1-pKD46

2013-08-08

electroporate BAP1-pKD46 with 500 ng DNA (5 µl of PCR amplificate from 2013-07-08)
grow in SOC + IPTG(1mM) + Arabinose (0.5%) at 37°C, 400 rpm for 3h
spin cells down (3 min at 8000 rcf)
plate 10 µl, rest on Cm, grow at 37°C

2013-08-05

Lane 1: NEB 2-log; lane 2: f3; lane 3: f6

received constructs from Matthew Mattozzi, Boston: pET21c-pcc-acca-mcce in NEB Turbo (Amp^r), pWH8: mcc-pcs-pcc-acc-mmce in NEB Turbo (Kan^r), E. coli MM17: MG1655 lambda(DE3) d(lacY) d(E14) mcr-pcs-pcc-acc::KanR integrated at phage site HK022 (Kan^r)
plates contaminated with Drosophila larvae
re-streak on fresh plates, run colony-PCR for f3, f6 from pET21c-pcc-acca-mcce (Q5, 20 µl total volume):

Cycles	temperature [°C]	Time [s]
1	98	120
35	98	5
	61	10
	72	120
1	72	600
1	10	inf

no bands

2013-08-06

Lane 1: NEB 2-log; lane 2: f3; lane 3: f6

run colony-PCR from pET21c-pcc-acca-mcce grown ON (Q5, 20 µl total volume) for fragments f3, f6:

Cycles	temperature [°C]	Time [s]
1	98	60
35	98	5
	61	10
	72	120
1	72	600
1	10	inf

inoculate 5 ml 2xYT+Amp with colony from which colony-PCR was run, grow at 37°C
no fragment for f3, re-run PCR (1 µl of liquid culture, 20 µl total, Phusion Flash):

Lane 1: NEB 2-log; lane 2: f3; lane 3: from genomic integration; lane 4: 2 µl of pET21c-pcc-acc-mmce miniPrep.

Cycles	temperature [°C]	Time [s]
1	98	60
35	98	1
	65	5
	72	60
1	72	600
1	10	inf

make miniPrep of liquid culture
no PCR product, miniPrep runs above 10 kb supercoiled (whole plasmid is expected to have 9 kb) (miniPrep has ca. 10 ng/µl)
re-run PCR for f3 from miniPrep (Q5, 0.2 µl DNA, 20 µl total volume):

Cycles	temperature [°C]	Time [s]
1	98	60
35	98	5
	61	10
	72	120
1	72	600
1	10	inf

2013-08-07

Lane 1: NEB 2-log; lane 2: f3; lane 3: BamHI digest of pET21c-pcc-acc-mcce; lane 4: 1 kb plus ladder.

need to verify plasmid identity: linearize with BamHI (unique restriction site in both pET21c... and pWH8, use 5 µl of miniPrep, 30 µl total volume)
linearized pET21c... plasmid runs at 9 kb -> right
PCR of f3 worked -> hypothesis: Gibson overhang against permeability device bound to E. coli genome in colony-PCRs, as permeability device is mutated version of FepA, which is present in E. coli
gel-purify all fragments
f1: 54.2 ng/µl, f2: 64.4 ng/µl, f3: 24.4 ng/µl, f4: 14 ng/µl, f5: 47.6 ng/µl, f6: 25.2 ng/µl; all in 30 µl
perform Gibson assembly:
- pIK1: 0.8 µl f1, 1.6 µl f2, 5 µl f3, 2 µl f4, 0.4 µl H₂O, 10 µl NEB Gibson MM
- pIK2: 1 µl f5, 6 µl f6, 3 µl f4
- incubate at 50°C for 1h
transform TOP10: 2 transformations per plasmid: 5 µl of Gibson assembly, 5 µl of 1:4 diluted Gibson assembly
- grow in 2xYT at 37°C, plate on Cm, grow at 37°C

2013-08-08

pIK1: several colonies, some of them pink -> pick 10 white, grow in 2xYT+Cm at 37°C
pIK2: 2 populations of colonies: large and small, several large colonies are pink -> pick 5 white large, 5 white small colonies, grow in 3 ml 2xYT+Cm at 37°C

2013-08-09

Lane 1: NEB 2-log; lanes 2-10: pIK1 miniPreps digested with BamHI+HindIII; lanes 11-13: large colonies of pIK2 miniPreps digested with BamHI+HindIII

Lane 1: NEB 2-log; lanes 2-3: large colonies of pIK2 miniPreps digested with BamHI+HindIII; lanes 4-8: small colonies of pIK2 miniPreps digested with BamHI+HindIII; lanes 9-13: Flo's PCR

colony 8 of pIK1 did not grow
make miniPreps of 2 ml everything else (2 ml each) -> ca. 62 - 600 ng/µl
miniPrep yields quite high, but consistent: pACYC with p15A origin (4 kb) yields 0.6 µg DNA / ml culture in LB, culture in 2xYT/TB yields 2-5 times more cells (according to QiaGen) => ca. 10-15 µg expected for 9 kb plasmid
digest with BamHI+HindIII (20 µl total volume, 0.5 µl enzyme, 1 µl DNA [except for sample with 62 ng/µl, there 2 µl DNA was used])
expected fragments: 2151 bp + 7265 bp for pIK1, 2151 bp + 5029 bp for pIK2
send pIK1.2 and pIK2.2 to sequencing with primers VF2 and VR

Lab book: genomic integration
Lab book: plasmid construction

2013-08-12

Lane 1: NEB 2-log; lanes 2-4: Colony-PCRs with primers IK01+IK02

no colonies on 10 µl plate
2 large colonies, 1 small colony on rest plate
run colony-PCR with primers IK01+IK02:

Cycles	temperature [°C]	Time [s]
1	95	300
12	95	60
	68 ↓0.5°C	30
	72	120
23	95	60
	62	30
	72	120
1	72	600
1	12	inf

genomic integration failed

== 2013-08-12 ==

sequences arrived: File:PIK1.2-pIK2.2 seq 2013-08-12.zip

perform multiple sequence alignment against assumed sequences: pIK1.2 with VF2, pIK1.2 with VR, pIK2.2 with VF2, pIK2.2 with VR

pIK1.2 looks good

part of RBS missing in pIK2.2 -> makes no sense, as part of binding part of IK35, with which the backbone was amplified

send pIK2.6 to sequencing with primers VF2 and VR, also sequence pIK1.2 with primer IK25 to find out whether RBS is also missing there

2013-08-13

sequences arrived: File:PIK1.2-pIK2.6 seq 2013-08-13.zip
perform multiple sequence alignment against assumed sequences: pIK1.2 with IK25, pIK2.6 with VF2, pIK2.6 with VR
sequences look good
prepare glycerol stock of TOP10-pIK1.2

2013-08-14

prepare glycerol stock of TOP10-pIK2.6

Lab book: plasmid construction

2013-08-19

received BL21(DE3) from Gruss Lab, ZMBH
grow in LB to OD=0.53, prepare competent cells
co-transform with pIK1.2(0.2 µl = 120 ng)+pMM64(1 µl = 15 ng), pIK2.6(0.2 µl = 60 ng)+pMM64(1 µl = 15 ng), plate on Cm+Amp+IPTG, grow at 37°C

2013-08-20

all colonies white
pick 1 colony each, inoculate LB+Cm+Amp, grow at 37°C until cultures are opaque, add IPTG to 1mM, grow at 30°C
no visible indigoidine production
need to clone into a different backbone in order to be able to cotransform with pRB21
inoculate LB+Kan with TOP10-pSB3K3-BBa_J04450, grow at 37°C

2013-08-21

Lane 1: NEB 2-log; lanes 2-3: pSB3K3-BBa_J04450 digested with EcoRI+SpeI; lane 4: pIK1.2 digested with EcoRI+SpeI; lane 5: pIK2.6 digested with EcoRI+SpeI

prepare glycerol stock of TOP10-pSB3K3-BBa_J04450
perform miniPrep -> 10.1 ng/µl in 38 µl
digest with EcoRI+SpeI: 380 ng of pSB3K3-BBa_J04450: use everything (50 µl total volume, 2x0.5 µl enzyme, expect 2.7kb & 1kb), 1200 ng of pIK1.2 (2 µl of miniPrep from 2013-08-09, 20 µl total volume, 2x0.5 µl enzyme, expect 6.7kb & 2.7kb), 900 ng of pIK2.6 (3 µl of miniPrep from 2013-08-09, 20 µl total volume, 2x0.5 µl enzyme, expect 4.4kb & 2.7kb)
pSB3K3-BBa_J04450 looks as though it was not cut: inoculate 50 ml TB+Kan with TOP10-pSB3K3-BBa_J04450, grow at 37°C
as control for indigoidine production from pMM64: co-transform BL21(DE3) with pMM64(1 µl = 15 ng)+pMM65(0.2 µl = 13 ng), plate on Amp+Kan+IPTG

2013-08-22

Lane 1: pSB3K3-BBa_J04450 digested with EcoRI+SpeI, lane 2: NEB 2-log

Lane 1: NEB 2-log; lanes 2-9: pRB* plasmids; lane 10: 1 µl of pSB3K3-BBa_J04450 midiPrep

no colonies of BL21(DE3)-pMM64-pMM65: co-transform BL21(DE3) with pMM64(1 µl = 15 ng)+pMM65(1 µl = 75 ng), plate on Amp+Kan+IPTG
prepare midiPrep of pSB3K3-BBa_J04450: 2952.1 ng/µl
digest 0.4 µl of midiPrep with EcoRI+SpeI (20 µl total volume, 2x0.5 µl enzyme)
band too weak: 2 possibilities:
1. concentration measurement wrong
2. mispipeted
=> load 1 µl of midiPrep on gel -> concentration measurement about right
large pSB3K3 fragment over 3 kb, consistent with miniPrep from 2013-08-21 -> 2.7 kb expected, sequence wrong on parts.igem.org
gel-purify pSB3K3, 6 kb fragment of pIK1, 4 kb fragment of pIK2
18 µl of pSB3K3 (not measured), 12.3 ng/µl pIK1 in 21 µl; 7.9 ng/µl pIK2 in 21 µl
ligate at RT for 1h:

what	µl
pSB3K3	9
insert	8
T4 ligase	1 µl
T4 ligase buffer	2 µl

heat-inactivate: 75°C for 5 min
transform 10 µl of each ligation into TOP10, plate on Kan, grow at 37°C (pSB3K3+pIK2 = pIK6)

2013-08-23

Colony-PCR of TOP10 transformed with pSB3K3 ligated with pIK1/pIK2 and primers RB43+VR. Lane 1: NEB 2-log; lanes 2-6: pIK1; lanes 7-11: pIK2

Colony-PCR of TOP10 transformed with pSB3K3 ligated with pIK2 and primers RB43+VR. Lane 1: NEB 2-log; lanes 2-11: pIK2

pick 5 colonies each, run colony-PCR with primers RB43+VR (expected: 1kb, using iTaq, 20 µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	30
	54	30
	72	90
1	72	600
1	10	inf

no amplificate
have another look at sequences (motivated by DelRest results): 1 bp missing in pIK1.2: frame shift in permeability device => send pIK1.3 to sequencing with primers VF2, VR, IK25
pick 30 colonies of pSB3K3-pIK2, run colony-PCR with primers RB43+VR (pool 3 colonies in 1 PCR reaction, iTaq, 20 µl total volume)
no positives => ligation did not work, most likely due to low DNA concentrations
need to repeat: inoculate 2x5 ml 2xYT+Cm with TOP10-pIK2.6

2013-08-24

Lane 1: NEB 2-log; lane 3: pSB3K3 digested with EcoRI+SpeI; lane 5: pIK2.6 digested with EcoRI+SpeI

make miniPrep of pIK2.6: 97 ng/µl in 37.5 µl
digest 3 µg pSB3K3 (1 µl of midiPrep from 2013-08-22), 1.7 µg pIK2.6 (17 µl of miniPrep) with EcoRI+SpeI (20 µl total volume, 0.5 µl of each enzyme)
treat pSB3K3 digest with antarctic phosphatase (37°C, 60 min)
run gel, gel-purify -> 18 µl pSB3K3 (not measured), 15.0 ng/µl pIK2.6 in 20.5 µl
ligate at RT for 1h:

what	µl
pSB3K3	9
pIK2.6	8
T4 ligase	1 µl
T4 ligase buffer	2 µl

heat-inactivate: 75°C for 5 min
transform 10 µl of ligation into TOP10, plate on Kan, grow at 37°C

2013-08-25

Colony-PCR of TOP10 transformed with pSB3K3 ligated with pIK2 and primers RB43+VR. Lane 1: NEB 2-log; lanes 2-11: pIK2

pick 10 colonies, run colony-PCR with primers RB43+VR (expected: 1kb, using iTaq, 20 µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	30
	54	30
	72	90
1	72	600
1	10	inf

no amplificate
VR primer might not be binding to pSB3K3: http://www.ccbi.cam.ac.uk/iGEM2006/index.php/Primer_List#BioBrick_verification_primers , https://2009.igem.org/Team:Groningen/Notebook/22_July_2009
pick another 10 colonies, run colony-PCR with primers VF2+IK25 (expected: 1kb, iTaq, 20 µl total volume):

Colony-PCR of TOP10 transformed with pSB3K3 ligated with pIK2 and primers VF2+IK25. Lane 1: NEB 2-log; lanes 2-11: pIK2

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	30
	54	30
	72	90
1	72	600
1	10	inf

definite product, but at 1.3 kb => pSB3K3 was longer than expected in digest, might be a result from that
unspecific bands probably due to melting temperature of IK25 being at 67°C
inoculate 2xYT+Kan, grow at 37°C
pSB3K3 used was from plate 5 => transform TOP10 with pSB3K3 from plate 2, well 6 F

Lab book: plasmid construction

2013-08-26

Lane 1: NEB 2-Log, Lane 2: pIK6.1 digested with HindIII+BamHI; lane 3: pIK6.2 digested with HindIII+BamHI

make miniPreps of colonies 1 and 2: 71.4 ng/µl and 75.1 ng/µl in 38 µl
digest with HindIII+BamHI (3 µl DNA, 0.5 µl of each enzyme, 20 µl total); expected: 4.1 kb, 2.1 kb, 0.9 kb
no 0.9 kb fragment => no BamHI site in KanR gene, 2.1 fragment visible corresponds to acca-sfp => insert completely within backbone
co-transform TOP10 with pIK6.1+pRB21
sequences of pIK1.3 arrived: PIK1.3-2013-08-26.zip, PIK1.3-2013-08-26 VF2.clustal.txt, PIK1.3-2013-08-26 VR.clustal.txt
point mutation in permeability device, interestingly, both the frameshift in pIK1.2 and this point mutation create a stop codon at the beginning of the permeability device
send pIK1.4 to sequencing with primer VF2

2013-08-27

Lane 1: NEB 2-log, lane 2: pSB3K3-BBa_J04450 digested with EcoRI+SpeI

TOP10-pIK6.1-pRB21 are not blue, but the indigoidine group is having problems with pRB21 -> pRB21 might not work
sequence of pIK1.4 arrived: PIK1.4-2013-08-27.zip, PIK1.4-2013-08-27 VF2.clustal.txt
again frame-shift in permeability device -> send pIK1.6, pIK1.7, pIK1.10 to sequencing with primer VF2
make miniPrep of pSB3K3: 54.7 ng/µl in 38 µl
digest pSB3K3 with EcoRI+SpeI (20 µl total volume, 5 µl DNA, 0.5 µl of each enzyme)
gel-purify, ligate with pIK2.6 fragment from 2013-08-24 at RT for 1h -> pIK7:

what	µl
pSB3K3	9
pIK2.6	8
T4 ligase	1 µl
T4 ligase buffer	2 µl

heat-inactivate: 75°C for 5 min
transform 10 µl of ligation into TOP10, plate on Kan, grow at 37°C

2013-08-28

Colony-PCR of TOP10 transformed with pSB3K3 ligated with pIK2 (-> pIK7) and primers VF2+IK25. Lane 1: NEB 2-log; lanes 2-6: pIK7

pick colonies, run colony-PCR with primers VF2+IK25 (expected: 1kb, iTaq, 20 µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	30
	54	30
	72	90
1	72	600
1	10	inf

grow in 2xYT+Kan at 37°C

2013-08-29

Lane 1: NEB 2-Log, Lane 2: pIK7.1 digested with HindIII+BamHI; lane 3: pIK7.2 digested with HindIII+BamHI

sequences of pIK1 arrived: PIK1.6-pIK1.7-pIK1.10-2013-08-29.zip, PIK1.6-2013-08-29 VF2.clustal.txt, PIK1.7-2013-08-29 VF2.clustal.txt, PIK1.10-2013-08-29 VF2.clustal.txt
frame-shift in pIK1.6, point mutations in pIK1.7, pIK1.10
perform miniPreps of pIK7 -> ca. 50 ng/µl in 38 µl
digest 5 µl of pIK7.1, pIK7.2 with BamHI+HindIII (0.5 µl of each enzyme, 20 µl total volume)
bands at right positions (expected: 4.1, 2.1, 0.8 kb)
prepare glycerol stock of TOP10-pIK7.1

2013-08-30

electroporate electrocompetent DH10ß with 1 µl, 14 µl of 1:4 Gibson mix for pIK1 from 2013-08-07
plate 10 µl, rest of each electroporation on Cm, grow at 37°C

2013-08-31

very large and small colonies present, after heat-schock transformation last time only large colonies present
pick 5 small colonies from each plate, grow in 2xYT+Cm (no 2xYT left => last 3 colonies from 14 µl / rest plate grown in LB+Cm) at 37°C

2013-09-01

pIK1.12 did not grow
make miniPreps of all cultures -> concentrations about 200-300 ng/µl in 37.5 µl (except pIK1.14: 50 ng/µl)
digest with BamHI+HindIII (20 µl total volume, 0.5 µl enzyme, 1 µl DNA)
expected fragments: 2151 bp + 7265 bp

Lane 1: NEB 2-log; lanes 2-13: pIK1 miniPreps digested with BamHI+HindIII; lanes 2-5: 1 µl / 10 µl plate; lanes 6-10: 1 µl / rest plate; lanes 11-13: 14 µl / 10 µl plate

Lane 1: NEB 2-log; lanes 2-8: pIK1 miniPreps digested with BamHI+HindIII; lanes 2-3: 14 µl / 10 µl plate; lanes 4-8: 14 µl / rest plate

Lab book: plasmid construction

2013-09-02

send pIK1.11, pIK1.13, pIK1.14 to sequencing with primer VF2

2013-09-03

sequences arrived: PIK1.11-pIK1.13-pIK1.14-2013-09-03.zip, PIK1.11-2013-09-03 VF2.clustal.txt, PIK1.13-2013-09-03 VF2.clustal.txt, PIK1.14-2013-09-03 VF2.clustal.txt
insertions leading to stop-codon in pIK1.11, pIK1.13; two bases of RBS missing in pIK1.14
check wiki of Cambridge 2007 team, who constructed the permeability device: they tried different promoter strengths, only the weakest promoter gave colonies => bacteria might be selecting against the permeability device
put pIK1.12 in incubator again, maybe it has the right sequence and grows slowly
pIK1.12 did grow, make miniPrep -> 67 ng/µl in 38 µl
send pIK1.14 to sequencing with primers IK25, VR

2013-09-04

Lane 1: NEB 2-log; lanes 2: pIK1.12 digested with BamHI+HindIII

sequences arrived: PIK1.14-2013-09-04.zip, PIK1.14-2013-09-04 IK25.clustal.txt, PIK1.14-2013-09-04 VR.clustal.txt
sequences match
prepare glycerol stock of DH10ß-pIK1.14
digest pIK1.12 with BamHI+HindIII (20 µl total volume, 134 ng DNA [2 µl of miniPrep from 2013-09-03], 0.5 µl enzyme)
digest looks about right, send to sequencing with primer VF2

2013-09-05

sequence arrived: PIK1.12-2013-09-05.zip, PIK1.12-2013-09-05 VF2.clustal.txt
ca. 1 kb missing from end of permeability device

Lab book: plasmid construction

2013-09-09

co-transform TOP10 with pRB22.3 and pIK7.1, plate on Cm+Kan, grow at 37°C

2013-09-10

after ca. 18h at 37°C: lots of tiny colonies, not blue
leave at RT in drawer (no light)

2013-09-11

colonies became blue

TOP10 cotransformed with pRB22.3 and pIK7.1

start constructing pIK8: promoter even weaker than the one used by Cambridge 2007, weak RBS
run PCRs of (2 ng DNA, 20 µl total volume, using Q5):
- pIK2.6 with primers IK40+IK43 -> f7

Cycles	temperature [°C]	Time [s]
1	98	30
35	98	10
	58	10
	72	300
1	72	600
1	10	inf

- BBa_I746200 with primers IK41+IK42 -> f8

Cycles	temperature [°C]	Time [s]
1	98	30
35	98	10
	60	10
	72	90
1	72	600
1	10	inf

2013-09-12

Lane 1: NEB 2-log; lane 2: f7; lane 3: f8

run gel, gel-purify fragments -> 6.3 ng/µl in 20 µl (f7); 36.1 ng/µl in 20 µl (f8)
perform Gibson assembly: 8 µl f7, 2 µl f8, 10 µl MM, incubate at 50°C for 1h
dilute Gibson mix 1:4, electroporate electrocompetent DH10ß with 1 µl, 14 µl of dilution
plate 10 µl, rest on Cm, grow at 37°C

2013-09-13

very large and very small colonies present, pick starting with small colonies, run colony-PCR with primers IK26+VR (iTaq, 20 µl total volume) using 2 ng of BBa_I746200 in pSB1AK3 as positive control:

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	30
	54	30
	72	240
1	72	600
1	10	inf

clones grown in eppendorf tubes in 2xYT+Cm at 37°C

2013-09-14

Colony-PCR of DH10ß transformed with pIK8 and primers IK26+VR. Lane 1: NEB 2-log; lanes 2-11: colonies; lane 12: positive control (BBa_I746200 in pSB1AK3)

run gel
colonies designated pIK8.1, pIK8.2, pIK8.6, pIK8.9 positive
transfer to baci falcons, add 2xYT+Cm, grow at 37°C

2013-09-15

Restriction digest of pIK8 with BamHI+HindIII. Lane 1: NEB 2-log; lane 2: pIK8.1; lane 3: pIK8.2; lane 4: pIK8.6; lane 5: pIK8.9

make miniPreps: 73.5 ng/µl (pIK8.1), 12.9 ng/µl (pIK8.2), 289.0 ng/µl (pIK8.6), 169.0 ng/µl (pIK8.9) in 37.5 µl each
digest with BamHI+HindIII using 2 µl (pIK8.1), 10 µl (pIK8.2), 1 µl (pIK8.6), 1 µl (pIK8.9) DNA (20 µl total volume)
expected: 2.1 + 7.3 kb

Lab book: plasmid construction

2013-09-16

send pIK8.6, pIK8.9 to sequencing with primer RB43

2013-09-17

sequences arrived: PIK8.6-pIK8.9-2013-09-16.zip, PIK8.6-2013-09-16 RB43.clustal.txt, File:Heidelberg_PIK8.9-2013-09-16 RB43.clustal.txt
no mutations at primer site
sequence with VR primer
inoculate 2x 6 ml 2xYT+Cm with DH10ß-pIK8.6

2013-09-18

Lane 1: NEB 2-log; lane 2: pIK8.6 digested with EcoRI+SpeI, lane 3: pSB1C3 digested with EcoRI+SpeI

sequences arrived: PIK8.6-pIK8.9-2013-09-18.zip, PIK8.6-2013-09-18 VR.clustal.txt, File:Heidelberg_PIK8.9-2013-09-18 VR.clustal.txt
sequences look good
make miniPrep of pIK8.6 -> 269 ng/µl in 38 µl
to verify functionality of permeability device: need to co-transform with indigoidine synthetase => need to clone into pSB3K3 -> pIK9
need to clone into pSB1C3 for submission (pIK10, pIK11): digest 465 ng pSB1C3 (1 µl of Ralf's midiPrep) with EcoRI+SpeI, treat with antarctic phosphatase (37°C, 60 min)
digest pIK8.6 with EcoRI+SpeI (3 µl DNA, 0.5 µl enzyme, 20 µl total volume)
gel-purify pIK8.6 insert (20 ng / µl in 20 µl), pSB1C3 (18 µl, concentration not measured)
ligate for 1 h at RT:

	pIK9	pIK10	pIK11
backbone	9 µl pSB3K3 ES from 2013-09-27	9 µl pSB1C3 ES	9 µl pSB1C3 ES
insert	8 µl pIK8.6 ES	8 µl pIK8.6 ES	4.5 µl pIK2.6 ES (rest from 2013-08-24)
T4 ligase	1 µl	1 µl	1 µl
T4 ligase buffer	2 µl	2 µl	2 µl
H₂O	0 µl	0 µl	3.5 µl

transform TOP10 with 10 µl of each ligation, plate on LB+Kan(pIK9), LB+Cm(pIK10, pIK11)

2013-09-19

Lane 1: NEB 2-log; lanes 2-5: pIK9; lanes 6-9: pIK10; lanes 10-13: pIK11

colonies present for all ligations
colonies for pIK10 extremely small -> permeability device toxic
run colony-PCR using primers VF2+IK25 (expected: 1 kb, OneTaq, 20 µl total volume):

Cycles	temperature [°C]	Time [s]
1	95	300
35	95	30
	54	30
	72	90
1	72	600
1	10	inf

grow in TB+Kan (pIK9) / TB+Cm (pIK10, pIK11)
evening: make miniPreps of pIK9, pIK11 (pIK10 grew very slowly) -> ca. 50-60 ng/µl (pIK9), 100-300 ng / µl (pIK11) in 38 µl
inoculate 2xYT+Cm with pIK8.1, pIK8.6

2013-09-20

make miniPreps of pIK10 -> 400-600 ng/µl in 38 µl
digest everything with BamHI+HindIII, expected: 2.1 kb + 3.1 kb + 4.1 kb (pIK9), 2.1 kb + 6.6 kb (pIK10), 2.1 kb + 4.3 kb (pIK11) (20 µl total volume, 0.5 µl enzyme, using 0.5 µl (pIK10), 1 µl (pIK11), 2 µl (pIK9) DNA)
to distinguish between pSB3C5 and pSB1C3: digest pIK10, pIK11 with XhoI (expected: 1 band for pSB3C5, 3 bands for pSB1C3)

All digested with BamHI+HindIII. Lane 1: NEB 2-log; lanes 2-5: pIK9; lanes 6-9: pIK10; lanes 10-11: pIK11

All digested with XhoI. Lane 1: NEB 2-log; lanes 2-3: pIK11; lanes 4-7: pIK10.

send pIK10.1, pIK10.3, pIK10.3, pIK11.1, pIK11.2 to sequencing with primers VF2, VR
test permeability device:
- inoculate 3 ml LB+Cm soft agar with 100 µl of pIK8.1, pIK8.6 ON culture, pour on LB+Cm plates
- add sterile filter paper, pipet 8 µl, 4 µl, 2 µl, 1 µl of Bacitracin on filter paper discs
- grow at 37°C

Left: TOP10-pIK8.6, right: TOP10-pIK8.1 (negative control)
counterclockwise, starting top right: 8 µl, 4 µl, 2 µl, 1 µl bacitracin

Co-transform TOP10 with 25 ng pIK9.1, 10 ng pRB22.4, plate on Cm+Kan, grow at 37°C

2013-09-21

co-transformats: lots of extremely small, blue-ish colonies, several big white colonies -> possibly mutated indigoidine synthetase, several big black colonies -> possibly mutated permeability device
pick one little blue-ish colony, grow in 2xYT+Cm+Kan at 37°C

Lab book: plasmid construction

== 2013-09-23 ==

sequences arrived: File:Heidelberg PIK10.1-pIK10.2-pIK10.3-pIK11.1-pIK11.2-2013-09-23.zip, File:Heidelberg PIK10.1-2013-09-23 VF2.clustal.txt, File:Heidelberg PIK10.1-2013-09-23 VR.clustal.txt, File:Heidelberg PIK10.2-2013-09-23 VF2.clustal.txt, File:Heidelberg PIK10.2-2013-09-23 VR.clustal.txt, File:Heidelberg PIK10.3-2013-09-23 VF2.clustal.txt, File:Heidelberg PIK10.3-2013-09-23 VR.clustal.txt, File:Heidelberg PIK11.1-2013-09-23 VF2.clustal.txt, File:Heidelberg PIK11.1-2013-09-23 VR.clustal.txt, File:Heidelberg PIK11.2-2013-09-23 VF2.clustal.txt, File:Heidelberg PIK11.2-2013-09-23 VR.clustal.txt

sequences are right

when pasting sequence of pIK10 into parts registry: realized that introduced XbaI site before BBa_B0030, can not submit part

2013-09-27

Lane 1: NEB 2-log; lane 3: pIK8.6 digested with EcoRI+XbaI; lane 5: PCR of pIK8.6 with primers VF2+IK44

need to remove XbaI site for submission (for Boston) -> pIK12: amplify pccB-accA2 with primer introducing SpeI, ligate SpeI+Xba+ sites
run PCR of pIK8.6 with primers VF2+IK44 (3 ng DNA, 20 µl total volume, using Q5) -> f9:

Cycles	temperature [°C]	Time [s]
1	98	30
35	98	10
	55	10
	72	180
1	72	600
1	10	inf

digest 867 ng pIK8.6 (3 µl of miniPrep from 2013-09-15) with EcoRI+XbaI (20 µl total volume, using 0.5 µl enzyme), treat with antarctic phosphatase (37°C, 60 min)
gel-purify large pIK8.6 fragment, f9 (elute f9 in 17 µl)

2013-09-28

digest f9 with EcoRI+SpeI (0.5 µl enzyme, 20 µl total volume), purify with Nucleotide Removal Kit
ligate at RT for 1h:

what	µl
pIK8.6	8
f9	9
T4 ligase	1 µl
T4 ligase buffer	2 µl

heat-inactivate at 75°C for 5 min
transform 10 µl into TOP10, plate 10 µl, rest on Cm, grow at 37°C

2013-09-28

lots of small colonies on both plates, several large colonies on both plates
pick 4 small, 1 large colonies from 10 µl plate, grow in 2xYT+Cm at 37°C

@@ Line 1: / Line 1: @@
-{{:Team:Heidelberg/Templates/bootstrap-css}}
-{{:Team:Heidelberg/Templates/basic-css}}
-{{:Team:Heidelberg/Templates/style2-css}}
-{{:Team:Heidelberg/Templates/scrollbar-css}}
 {{:Team:Heidelberg/Templates/Navigation}}
+{{:Team:Heidelberg/Templates/scrollbar-css}}
 <html>
 <style type="text/css">
@@ Line 10: / Line 8: @@
 }
     p  {
-       font-size:14px;
+       font-size:12px;
 }
 </style>
    <div class="container">
              <!--Project Description-->
-             <div style="margin-top:80px">
+             <div>
                          <h1><span style="font-size:140%;color:#FFCC00;">Methylmalonyl-CoA Pathway.</span><span class="text-muted" style="font-family:Arial, sans-serif; font-size:90%"> Making the whole thing work.</span></h1>
-                         <p>Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.</p>
              </div>
              <div class="row">
-             <div class="col-sm-4">
+             <div class="col-sm-12 col-md-6">
              <!--Months-->
-                 <ul class="pagination" style="margin-bottom:2%; margin-left:4%;">
+                 <ul class="pagination" style="margin-bottom:2%; margin-left:17%;">
                      <!--<button type="button" class="btn btn-default">May</button>
@@ Line 57: / Line 55: @@
                          </ol>-->
-                         <div class="carousel-inner">
+                         <div class="carousel-inner" style="margin-top:15%">
                              <div class="item active june first">
@@ Line 64: / Line 62: @@
                                        <h1>Week 6</h1>
-                                       <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">
+                                       <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">In this week the first experiments for the genomic integration of the methyl-malonyl-CoA synthetase were set up. First of all the plasmids were transformed into TOP10 grown and purified. The first attempts on the amplification of the fragment didn't work at all and we ended up with a specific product of the wrong size.</p>
-This week the project DelRest was launched.
-In order to clone the Delftibactin cluster from <i>D. Acidovorans </i> into <i> E.coli </i>  we decided to use Gibson cloning. Therefore Gibson primers were designed to amplify our target backbone pSB4K5 with an overlap to DelA. Furthermore the Gibson primer connecting DelOP and DelAG introduces the ribosome binding site BBa_BNILS. Accordingly the Gibson primer for joining DelL with DelOP includes the ribosome binding site BBa_BNILS. The very last gibson primer used to amplify DelL consequently has an overlap to the beginning of the mRFP reporter gene connected to pSB4K5. Check out our vectormap if you are curious about the detailed primer design. The goal of this week was to amplify our previously assembled backbone with the intended overlaps as well as the desired genes from our host organism <i>D. Acidovorans </i>.
-                                       </p>
                                      </div>
                                  </div>
@@ Line 78: / Line 71: @@
                                        <h1>Week 7</h1>
-                                       <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">
+                                       <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">After a validation of the template plasmid via restriction digest the PCR reaction was optimised. Unfortunately none of the cells transformed with the PCR product using electroporation could be positively screened, no matter how the PCR fragment was amplified.</p>
-This week the project DelRest was launched.
-In order to clone the Delftibactin cluster from <i>D. Acidovorans </i> into <i> E.coli </i>  we decided to use Gibson cloning. Therefore Gibson primers were designed to amplify our target backbone pSB4K5 with an overlap to DelA. Furthermore the Gibson primer connecting DelOP and DelAG introduces the ribosome binding site BBa_BNILS. Accordingly the Gibson primer for joining DelL with DelOP includes the ribosome binding site BBa_BNILS. The very last gibson primer used to amplify DelL consequently has an overlap to the beginning of the mRFP reporter gene connected to pSB4K5. Check out our vectormap if you are curious about the detailed primer design. The goal of this week was to amplify our previously assembled backbone with the intended overlaps as well as the desired genes from our host organism <i>D. Acidovorans </i>.
-                                       </p>
                                      </div>
                                  </div>
@@ Line 92: / Line 80: @@
                                        <h1>Week 8</h1>
-                                       <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">
+                                       <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">As the repetition of the colony PCR under different conditions was still negative, new PCR products were prepared and pooled. To eliminate possible errors fresh competent cells were prepared.</p>
-This week the project DelRest was launched.
-In order to clone the Delftibactin cluster from <i>D. Acidovorans </i> into <i> E.coli </i>  we decided to use Gibson cloning. Therefore Gibson primers were designed to amplify our target backbone pSB4K5 with an overlap to DelA. Furthermore the Gibson primer connecting DelOP and DelAG introduces the ribosome binding site BBa_BNILS. Accordingly the Gibson primer for joining DelL with DelOP includes the ribosome binding site BBa_BNILS. The very last gibson primer used to amplify DelL consequently has an overlap to the beginning of the mRFP reporter gene connected to pSB4K5. Check out our vectormap if you are curious about the detailed primer design. The goal of this week was to amplify our previously assembled backbone with the intended overlaps as well as the desired genes from our host organism <i>D. Acidovorans </i>.
-                                       </p>
                                      </div>
                                  </div>
@@ Line 106: / Line 89: @@
                                        <h1>Week 9</h1>
-                                       <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">
+                                       <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">After doing colony PCR again and getting inconclusive results, it was decided that the genomic integration failed using this experimental setup. Thus we started from scratch using a new primer pair and finally it turned out that the polymerase was causing the problems. By the end of the week BAP1-pKD46 could be transformed.</p>
-This week the project DelRest was launched.
-In order to clone the Delftibactin cluster from <i>D. Acidovorans </i> into <i> E.coli </i>  we decided to use Gibson cloning. Therefore Gibson primers were designed to amplify our target backbone pSB4K5 with an overlap to DelA. Furthermore the Gibson primer connecting DelOP and DelAG introduces the ribosome binding site BBa_BNILS. Accordingly the Gibson primer for joining DelL with DelOP includes the ribosome binding site BBa_BNILS. The very last gibson primer used to amplify DelL consequently has an overlap to the beginning of the mRFP reporter gene connected to pSB4K5. Check out our vectormap if you are curious about the detailed primer design. The goal of this week was to amplify our previously assembled backbone with the intended overlaps as well as the desired genes from our host organism <i>D. Acidovorans </i>.
-                                       </p>
                                      </div>
                                  </div>
@@ Line 120: / Line 98: @@
                                        <h1>Week 10</h1>
-                                       <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">
+                                       <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Even after running several colony PCRs there were no positive clones to be found. Thus the pKD46 was digested for validation. On the gel a miniprep from the PCR-transformed cells was included. The identity of the pKD46 was fine and the miniprep didn't contain any DNA, as expected.</p>
-This week the project DelRest was launched.
-In order to clone the Delftibactin cluster from <i>D. Acidovorans </i> into <i> E.coli </i>  we decided to use Gibson cloning. Therefore Gibson primers were designed to amplify our target backbone pSB4K5 with an overlap to DelA. Furthermore the Gibson primer connecting DelOP and DelAG introduces the ribosome binding site BBa_BNILS. Accordingly the Gibson primer for joining DelL with DelOP includes the ribosome binding site BBa_BNILS. The very last gibson primer used to amplify DelL consequently has an overlap to the beginning of the mRFP reporter gene connected to pSB4K5. Check out our vectormap if you are curious about the detailed primer design. The goal of this week was to amplify our previously assembled backbone with the intended overlaps as well as the desired genes from our host organism <i>D. Acidovorans </i>.
-                                       </p>
                                      </div>
                                  </div>
@@ Line 133: / Line 106: @@
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 11</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">In this week the whole procedure was repeated again from fragment amplification to extensive colony PCR. This week several different colony types were encountered and one that grew only after 3 days actually gave a band at 1.2 kb, but it turned out to be unspecific.</p>
-Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Learn more</a></p>
-                                  <p>At the beginning of the week, we could verify that the Gibson Assembly for Tripeptide I was indeed positive, however, the other Gibson Assemblies did not work properly. Instead of picking new colonies, we decided to optimize the Gibson recipe instead, as backbone religations were the most common problem. With these improved protocols, we used Gibson Assembly for the Dipeptide, Tripeptide II and Tetrapeptide I, later that week, Tetrapeptide II followed. After the Transformation to DH10β cells and screening by restriction digest we could send samples for the Dipeptide and Tetrapeptide I to sequencing and obtained a positive alignment. Hence we transformed BAP I cells with the positive constructs. The same was...
-                                  </p>
                                  </div>
                                </div>
@@ Line 147: / Line 114: @@
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 12</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Several possible error sources such as unselective plates were investigated, but all turned out to be fine. The colony PCR was then repeated using yet another primer pair, but it still only gave unspecific or no bands.</p>
-Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Browse gallery</a></p>
-                                  <p>At the beginning of the week, we could verify that the Gibson Assembly for Tripeptide I was indeed positive, however, the other Gibson Assemblies did not work properly. Instead of picking new colonies, we decided to optimize the Gibson recipe instead, as backbone religations were the most common problem. With these improved protocols, we used Gibson Assembly for the Dipeptide, Tripeptide II and Tetrapeptide I, later that week, Tetrapeptide II followed. After the Transformation to DH10β cells and screening by restriction digest we could send samples for the Dipeptide and Tetrapeptide I to sequencing and obtained a positive alignment. Hence we transformed BAP I cells with the positive constructs. The same was...
-                                  </p>
                                  </div>
                                </div>
@@ Line 161: / Line 122: @@
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 13</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">In order to check whether the cell line used was actually the right one primers against sfp were used and cell from other subgroups were included. It turned out that something really weird was going onwith the cells, since sfp could not be detected. Thus the entirely new strategy of generating a plasmid instead of doing genomic integration was initialised.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Browse gallery</a></p>
                                  </div>
                                </div>
@@ Line 170: / Line 130: @@
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 14</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">At the beginning of the week, we could verify that the Gibson Assembly for Tripeptide I was indeed positive, however, the other Gibson Assemblies did not work properly. Instead of picking new colonies, we decided to optimize the Gibson recipe instead, as backbone religations were the most common problem. With these improved protocols, we used Gibson Assembly for the Dipeptide, Tripeptide II and Tetrapeptide I, later that week, Tetrapeptide II followed.</p>
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">To be really sure about the sfp a new plasmid preparation was made and cells were tranformed again. In parallel the pLF03 was also prepared and sent for sequencing. It turned out, that there is a deletion in the sequence and thus the primers can't bind properly.</p>
                                  </div>
                                </div>
@@ Line 179: / Line 139: @@
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 15</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">A final try on integrating the methyl-malonyl-CoA pathway was made. At the same time new plasmids carrying the pathway arrived and had to be validated first via PCR and restriction digestion. Several PCR reaction were run and also the first Gibson assembly and transformation was done for both plasmids. The positive colonies were sent for sequencing by the end of the week.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Learn more</a></p>
                                  </div>
                                </div>
@@ Line 188: / Line 147: @@
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 16</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">After finally giving up on the genomic integration we focused on the plasmid strategy, where the sequencing results of the two plasmids arrived. As they were already positive glycerol stocks were prepared.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Browse gallery</a></p>
                                  </div>
                                </div>
@@ Line 198: / Line 156: @@
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 17</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">In order to check for sfp expression pMM64, carrying an indigoidine synthetase was cotransformed, but didn't give any blue colonies. Thus the plasmid backbone had to be changed to allow for cotransformation with our own indigoidine construct. One of the new plasmids was sent for sequencing.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Browse gallery</a></p>
                                  </div>
                                </div>
@@ Line 208: / Line 165: @@
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 18</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">The sequencing results of pIK1.3 revealed a point mutation in the permeability device. All the other plasmids sent for sequencing also carried some kind of mutation that introduced a stop codon within the permeability device, which is thus non-functional. Moreover there were still no blue colonies even though we now used our own construct.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Browse gallery</a></p>
                                  </div>
                                </div>
@@ Line 218: / Line 174: @@
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 19</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">After doing some research in 2007's Cambridge team wiki it was found, that the permeability device is probably toxic to the cells and can thus only be succesfully cloned behind a very weak promotor.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Browse gallery</a></p>
                                  </div>
                                </div>
@@ Line 228: / Line 183: @@
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 20</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">This week we grew the first blue colonies with an updated version of the indigoidine construct. We also put the permeability device behind a very weak promotor and prepared new plasmids for sequencing.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Browse gallery</a></p>
                                  </div>
                                </div>
@@ Line 238: / Line 192: @@
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 21</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">When the sequencing results were analysed there were no mutations in the permeability device. Now the cloning of the plasmids for the parts submission started and by the end of the week we sent them for sequening.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Browse gallery</a></p>
                                  </div>
                                </div>
                              </div>
-                             <div class="item september">
+                             <div class="item september last">
                                <img src="data:image/png;base64,"/>
                                <div class="container">
                                  <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                                    <h1>Week 22</h1>
-                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
+                                   <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Unfortunately we noticed that we accidentally introduced an additional restriction site and could thus not submit the part to the registry. We already removed the restriction site and validated it by restriction digestion. Anyway we are going to try different restriction enzymes and send it for sequencing after wiki freeze.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Browse gallery</a></p>
-                                </div>
-                              </div>
-                            </div>
-                            <div class="item september last">
-                              <img src="data:image/png;base64,"/>
-                              <div class="container">
-                                <div class="carousel-caption scrollContent2" data-spy="scroll" data-target="#navbarExample" data-offset="0">
-                                  <h1>Week 23</h1>
-                                  <p style="font-size:10pt; text-align:justify; position:relative; margin-left:6%;">Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.</p>
-                                  <p><a class="btn btn-large btn-primary" href="#">Browse gallery</a></p>
                                  </div>
                                </div>
@@ Line 269: / Line 211: @@
                  </div>
              </div><!-- /.carousel -->
+</div>
-             <div class="jumbotron methods" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+           <div class="col-sm-12 col-md-6">
-                 <h2>Methods:</h2>
+             <div class="jumbotron methods" data-spy="scroll" data-target="#navbarExample" data-offset="0" style="margin-top:10%">
-                 <p style="font-size:10pt; text-align:justify">Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. .
+                 <h3>Graphical Abstract</h3>
-                </p>
+                 <div style="width:100%;">
+<a class="fancybox fancyGraphical" rel="group" href="https://static.igem.org/mediawiki/2013/e/e3/Heidelberg_ga_delf.png">
+    <img style="width:100%; margin-bottom:10px; padding:1%;border-style:solid;border-width:1px;border-radius: 4px; border-color: grey;" src="https://static.igem.org/mediawiki/2013/e/e3/Heidelberg_ga_delf.png"></img>
+</a>
+</div>
+</div>
+</div>
              </div>
          </div>
-         <div class="col-sm-8">
+<div class="container">
+<div class="row">
+         <div class="col-sm-12">
              <!--Start Weekly Labjournal-->
@@ Line 283: / Line 236: @@
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a6" data-toggle="tab">Overview</a></li>
+                       <li class="active"><a href="#a6" data-toggle="tab">Overview:genomic integration</a></li>
-                       <li><a href="#b6" data-toggle="tab">Lab book</a></li>
+                       <li><a href="#b6" data-toggle="tab">Lab book: genomic integration</a></li>
                      </ul>
                  </div>
                  <div class="jumbotron">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
@@ Line 314: / Line 267: @@
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a7" data-toggle="tab">Lab book</a></li>
+                       <li class="active"><a href="#a7" data-toggle="tab">Lab book: genomic integration</a></li>
                      </ul>
                  </div>
                  <div class="jumbotron">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
@@ Line 340: / Line 293: @@
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a8" data-toggle="tab">Lab book</a></li>
+                       <li class="active"><a href="#a8" data-toggle="tab">Lab book: genomic integration</a></li>
                      </ul>
                  </div>
                  <div class="jumbotron">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
@@ Line 366: / Line 319: @@
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a9" data-toggle="tab">Lab book</a></li>
+                       <li class="active"><a href="#a9" data-toggle="tab">Lab book: genomic integration</a></li>
                      </ul>
                  </div>
                  <div class="jumbotron">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
@@ Line 391: / Line 344: @@
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a10" data-toggle="tab">Lab book</a></li>
+                       <li class="active"><a href="#a10" data-toggle="tab">Lab book: genomic integration</a></li>
                      </ul>
                  </div>
                  <div class="jumbotron">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
@@ Line 417: / Line 370: @@
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a11" data-toggle="tab">Overview</a></li>
+                       <li class="active"><a href="#a11" data-toggle="tab">Lab book: genomic integration</a></li>
-                      <li><a href="#b11" data-toggle="tab">DelA-E</a></li>
-                      <li><a href="#d11" data-toggle="tab">DelA-G</a></li>
-                      <li><a href="#e11" data-toggle="tab">DelE-G</a></li>
-                      <li><a href="#c11" data-toggle="tab">DelF-G</a></li>
-                      <li><a href="#f11" data-toggle="tab">DelG</a></li>
-                      <li><a href="#g11" data-toggle="tab">DelO-P</a></li>
-                      <li><a href="#j11" data-toggle="tab">DelL-P</a></li>
-                      <li><a href="#h11" data-toggle="tab">DelL</a></li>
-                      <li><a href="#i11" data-toggle="tab">pSB4K5</a></li>
                      </ul>
                  </div>
                  <div class="jumbotron weekly">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                         <div class="tab-content">
                              <div class="tab-pane active" id="a11">
                                  <p style="font-size:12pt; text-align:justify;">
+                                </html>{{:Team:Heidelberg/Templates/MM_week11}}<html>
                                  </p>
                              </div>
-                            <div class="tab-pane" id="b11">
-                                <p style="font-size:12pt; text-align:justify;">
-                                     </html>{{:Team:Heidelberg/Templates/Del_week11_AE}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="d11">
-                                <p style="font-size:12pt; text-align:justify;">
-                                </html>{{:Team:Heidelberg/Templates/Del_week11_AG}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="e11">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week11_EG}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="f11">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week11_G}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="j11">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week11_LP}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="g11">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week11_OP}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="h11">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week11_L}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="i11">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week11_pSB4K5}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="c11">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week11_FG}}<html>
-                                </p>
-                            </div>
                         </div>
@@ Line 505: / Line 395: @@
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a12" data-toggle="tab">Overview</a></li>
+                       <li class="active"><a href="#a12" data-toggle="tab">Lab book genomic integration</a></li>
-                      <li><a href="#b12" data-toggle="tab">DelA-E</a></li>
-                      <li><a href="#e12" data-toggle="tab">DelE-G</a></li>
-                      <li><a href="#c12" data-toggle="tab">DelF-G</a></li>
-                      <li><a href="#f12" data-toggle="tab">DelG</a></li>
-                      <li><a href="#h12" data-toggle="tab">DelL-P</a></li>
-                      <li><a href="#g12" data-toggle="tab">DelO-P</a></li>
                      </ul>
                  </div>
                      <div class="jumbotron weekly">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
@@ Line 522: / Line 406: @@
                              <div class="tab-pane active" id="a12">
                                  <p style="font-size:12pt; text-align:justify;">
+                                </html>{{:Team:Heidelberg/Templates/MM_week12}}<html>
                                  </p>
                              </div>
-                            <div class="tab-pane" id="b12">
-                                <p style="font-size:12pt; text-align:justify;">
-                                     </html>{{:Team:Heidelberg/Templates/Del_week12_AE}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="e12">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week12_EG}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="f12">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week12_G}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="h12">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week12_LP}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="g12">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week12_OP}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="c12">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week12_FG}}<html>
-                                </p>
-                            </div>
                          </div>
                      </div>
@@ Line 572: / Line 420: @@
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a13" data-toggle="tab">Overview</a></li>
+                       <li class="active"><a href="#a13" data-toggle="tab">Lab book: genomic integration</a></li>
-                       <li><a href="#b13" data-toggle="tab">DelA-E</a></li>
+                       <li><a href="#b13" data-toggle="tab">Overview: plasmid construction</a></li>
-                       <li><a href="#c13" data-toggle="tab">DelA-F</a></li>
+                       <li><a href="#c13" data-toggle="tab">Lab book: plasmid construction</a></li>
-                      <li><a href="#d13" data-toggle="tab">DelA-G</a></li>
-                      <li><a href="#h13" data-toggle="tab">DelE</a></li>
-                      <li><a href="#e13" data-toggle="tab">DelE-G</a></li>
-                      <li><a href="#j13" data-toggle="tab">DelF-G</a></li>
-                      <li><a href="#f13" data-toggle="tab">DelG</a></li>
-                      <li><a href="#g13" data-toggle="tab">DelO-P</a></li>
                      </ul>
                  </div>
                  <div class="jumbotron weekly">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                           <div class="tab-content">
                              <div class="tab-pane active" id="a13">
                                  <p style="font-size:12pt; text-align:justify;">
+                                </html>{{:Team:Heidelberg/Templates/MM_week13}}<html>
                                  </p>
                              </div>
-                             <div class="tab-pane" id="b13">
+                             <div class="tab-pane active" id="b13">
                                  <p style="font-size:12pt; text-align:justify;">
-                                     </html>{{:Team:Heidelberg/Templates/Del_week13_AE}}<html>
+                                 </html>{{:Team:Heidelberg/Templates/MM_week13p_overview}}<html>
-                                 </p>
-                            </div>
-                            <div class="tab-pane" id="c13">
-                                <p style="font-size:12pt; text-align:justify;">
-                                </html>{{:Team:Heidelberg/Templates/Del_week13_AF}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="d13">
-                                <p style="font-size:12pt; text-align:justify;">
-                                </html>{{:Team:Heidelberg/Templates/Del_week13_AG}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="h13">
-                                <p style="font-size:12pt; text-align:justify;">
-                                </html>{{:Team:Heidelberg/Templates/Del_week13_E}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="e13">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week13_EG}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="f13">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week13_G}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="g13">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week13_OP}}<html>
                                  </p>
                              </div>
-                            <div class="tab-pane" id="j13">
+                             <div class="tab-pane active" id="c13">
                                  <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week13_FG}}<html>
+                                </html>{{:Team:Heidelberg/Templates/MM_week13p}}<html>
                                  </p>
                              </div>
@@ Line 650: / Line 456: @@
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a14" data-toggle="tab">Overview</a></li>
+                       <li class="active"><a href="#a14" data-toggle="tab">Lab book: genomic integration</a></li>
-                       <li><a href="#b14" data-toggle="tab">DelA-E</a></li>
+                       <li><a href="#b14" data-toggle="tab">Lab book: plasmid construction</a></li>
-                      <li><a href="#c14" data-toggle="tab">DelA-F</a></li>
-                      <li><a href="#d14" data-toggle="tab">DelA-G</a></li>
-                      <li><a href="#j14" data-toggle="tab">DelF-G</a></li>
-                      <li><a href="#f14" data-toggle="tab">DelG</a></li>
-                      <li><a href="#g14" data-toggle="tab">DelO-P</a></li>
                      </ul>
                  </div>
                  <div class="jumbotron weekly">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                           <div class="tab-content">
@@ Line 668: / Line 469: @@
                              <div class="tab-pane active" id="a14">
                                  <p style="font-size:12pt; text-align:justify;">
+                               </html>{{:Team:Heidelberg/Templates/MM_week14}}<html>
                                  </p>
                              </div>
@@ Line 674: / Line 475: @@
                              <div class="tab-pane" id="b14">
                                  <p style="font-size:12pt; text-align:justify;">
-                                 </html>{{:Team:Heidelberg/Templates/Del_week14_AE}}<html>
+                                 </html>{{:Team:Heidelberg/Templates/MM_week14p}}<html>
                                  </p>
                              </div>
-                             <div class="tab-pane" id="c14">
-                                <p style="font-size:12pt; text-align:justify;">
-                                </html>{{:Team:Heidelberg/Templates/Del_week14_AF}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="d14">
-                                <p style="font-size:12pt; text-align:justify;">
-                                </html>{{:Team:Heidelberg/Templates/Del_week14_AG}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="f14">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week14_G}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="g14">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week14_OP}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="j14">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week14_FG}}<html>
-                                </p>
-                            </div>
                          </div>
@@ Line 718: / Line 490: @@
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a15" data-toggle="tab">Overview</a></li>
+                       <li class="active"><a href="#a15" data-toggle="tab">Lab book: genomic integration</a></li>
-                       <li><a href="#b15" data-toggle="tab">DelA-E</a></li>
+                       <li><a href="#b15" data-toggle="tab">Lab book: plasmid construction</a></li>
-                      <li><a href="#c15" data-toggle="tab">DelA-F</a></li>
-                      <li><a href="#d15" data-toggle="tab">DelA-G</a></li>
-                      <li><a href="#e15" data-toggle="tab">DelE-F</a></li>
-                      <li><a href="#j15" data-toggle="tab">DelF-G</a></li>
-                      <li><a href="#f15" data-toggle="tab">DelG</a></li>
-                      <li><a href="#g15" data-toggle="tab">DelO-P</a></li>
-                      <li><a href="#h15" data-toggle="tab">DelL</a></li>
-                      <li><a href="#i15" data-toggle="tab">pSB4K5</a></li>
                      </ul>
                  </div>
                  <div class="jumbotron weekly">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                         <div class="tab-content">
                              <div class="tab-pane active" id="a15">
                                  <p style="font-size:12pt; text-align:justify;">
+                               </html>{{:Team:Heidelberg/Templates/MM_week15}}<html>
                                  </p>
                              </div>
@@ Line 743: / Line 508: @@
                                  <p style="font-size:12pt; text-align:justify;">
-                                 </html>{{:Team:Heidelberg/Templates/Del_week15_AE}}<html>
+                                 </html>{{:Team:Heidelberg/Templates/MM_week15p}}<html>
                                  </p>
                              </div>
-                            <div class="tab-pane" id="c15">
-                                <p style="font-size:12pt; text-align:justify;">
-                                     </html>{{:Team:Heidelberg/Templates/Del_week15_AF}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="d15">
-                                <p style="font-size:12pt; text-align:justify;">
-                                </html>{{:Team:Heidelberg/Templates/Del_week15_AG}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="e15">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week15_EF}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="f15">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week15_G}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="g15">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week15_OP}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="h15">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week15_L}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="i15">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week15_pSB4K5}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="j15">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week15_FG}}<html>
-                                </p>
-                            </div>
                         </div>
                     </div>
@@ Line 807: / Line 523: @@
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a16" data-toggle="tab">Overview</a></li>
+                       <li class="active"><a href="#a16" data-toggle="tab">Lab book: genomic integration</a></li>
-                       <li><a href="#b16" data-toggle="tab">DelA-F</a></li>
+                       <li><a href="#b16" data-toggle="tab">Lab book: plasmid construction</a></li>
-                       <li><a href="#d16" data-toggle="tab">DelA-G</a></li>
-                      <li><a href="#j16" data-toggle="tab">DelF-G</a></li>
-                      <li><a href="#f16" data-toggle="tab">DelG</a></li>
-                      <li><a href="#g16" data-toggle="tab">DelO-P</a></li>
-                      <li><a href="#i16" data-toggle="tab">pSB4K5</a></li>
-                      <li><a href="#z16" data-toggle="tab">Gibson assembly and validation</a></li>
                      </ul>
                  </div>
                  <div class="jumbotron weekly">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                         <div class="tab-content">
                              <div class="tab-pane active" id="a16">
                                  <p style="font-size:12pt; text-align:justify;">
+                                </html>{{:Team:Heidelberg/Templates/MM_week16}}<html>
                                  </p>
                              </div>
@@ Line 829: / Line 540: @@
                              <div class="tab-pane" id="b16">
                                  <p style="font-size:12pt; text-align:justify;">
-                                      </html>{{:Team:Heidelberg/Templates/Del_week16_AF}}<html>
+                                      </html>{{:Team:Heidelberg/Templates/MM_week16p}}<html>
                                  </p>
                              </div>
-                            <div class="tab-pane" id="d16">
+                       </div>
-                                <p style="font-size:12pt; text-align:justify;">
+                   </div>
+               </div>
+            </div>
-                                </html>{{:Team:Heidelberg/Templates/Del_week16_AG}}<html>
+            <!--Week 17-->
-                                </p>
+            <div class="labjournal-weekly">
-                            </div>
+                <div>
+                    <ul class="nav nav-tabs">
+                      <li class="active"><a href="#a17" data-toggle="tab">Lab book: plasmid construction</a></li>
-                             <div class="tab-pane" id="f16">
+                    </ul>
+                </div>
+                <div class="jumbotron weekly">
+                    <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                       <div class="tab-content">
+                             <div class="tab-pane active" id="a17">
                                  <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week16_G}}<html>
+                                </html>{{:Team:Heidelberg/Templates/MM_week17p}}<html>
                                  </p>
                              </div>
+                       </div>
+                   </div>
+               </div>
+            </div>
-                             <div class="tab-pane" id="g16">
+            <!--Week 18-->
+            <div class="labjournal-weekly">
+                <div>
+                    <ul class="nav nav-tabs">
+                      <li class="active"><a href="#a18" data-toggle="tab">Lab book: plasmid construction</a></li>
+                    </ul>
+                </div>
+                <div class="jumbotron weekly">
+                    <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                       <div class="tab-content">
+                             <div class="tab-pane active" id="a18">
                                  <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week16_OP}}<html>
+                                </html>{{:Team:Heidelberg/Templates/MM_week18p}}<html>
                                  </p>
                              </div>
+                       </div>
+                   </div>
+               </div>
+            </div>
-                             <div class="tab-pane" id="i16">
+            <!--Week 19-->
+            <div class="labjournal-weekly">
+                <div>
+                    <ul class="nav nav-tabs">
+                      <li class="active"><a href="#a19" data-toggle="tab">Lab book: plasmid construction</a></li>
+                    </ul>
+                </div>
+                <div class="jumbotron weekly">
+                    <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                       <div class="tab-content">
+                             <div class="tab-pane active" id="a19">
                                  <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week16_pSB4K5}}<html>
+                                </html>{{:Team:Heidelberg/Templates/MM_week19p}}<html>
                                  </p>
                              </div>
-                            <div class="tab-pane" id="j16">
+                       </div>
-                                <p style="font-size:12pt; text-align:justify;">
+                   </div>
-                               </html>{{:Team:Heidelberg/Templates/Del_week16_FG}}<html>
+               </div>
-                                </p>
+            </div>
-                            </div>
-                             <div class="tab-pane" id="z16">
+            <!--Week 20-->
+            <div class="labjournal-weekly">
+                <div>
+                    <ul class="nav nav-tabs">
+                      <li class="active"><a href="#a20" data-toggle="tab">Lab book: plasmid construction</a></li>
+                    </ul>
+                </div>
+                <div class="jumbotron weekly">
+                    <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                       <div class="tab-content">
+                             <div class="tab-pane active" id="a20">
                                  <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Template/Del_week16_Gibson}}<html>
+                                </html>{{:Team:Heidelberg/Templates/MM_week20p}}<html>
                                  </p>
                              </div>
@@ Line 879: / Line 642: @@
              </div>
-             <!--Week 17-->
+             <!--Week 21-->
              <div class="labjournal-weekly">
                  <div>
                      <ul class="nav nav-tabs">
-                       <li class="active"><a href="#a17" data-toggle="tab">Overview</a></li>
+                       <li class="active"><a href="#a21" data-toggle="tab">Lab book: plasmid construction</a></li>
-                      <li><a href="#i17" data-toggle="tab">pSB4K5</a></li>
-                      <li><a href="#z17" data-toggle="tab">Gibson assembly and validation</a></li>
                      </ul>
                  </div>
                  <div class="jumbotron weekly">
-                     <div class="scrollContent nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                     <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
                         <div class="tab-content">
-                             <div class="tab-pane active" id="a17">
+                             <div class="tab-pane active" id="a21">
                                  <p style="font-size:12pt; text-align:justify;">
+                                </html>{{:Team:Heidelberg/Templates/MM_week21p}}<html>
                                  </p>
                              </div>
+                       </div>
+                   </div>
+               </div>
+            </div>
-                             <div class="tab-pane" id="i17">
+            <!--Week 22-->
+            <div class="labjournal-weekly">
+                <div>
+                    <ul class="nav nav-tabs">
+                      <li class="active"><a href="#a22" data-toggle="tab">Lab book: plasmid construction</a></li>
+                    </ul>
+                </div>
+                <div class="jumbotron weekly">
+                    <div class="nav navbar" data-spy="scroll" data-target="#navbarExample" data-offset="0">
+                       <div class="tab-content">
+                             <div class="tab-pane active" id="a22">
                                  <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Templates/Del_week17_pSB4K5}}<html>
+                                </html>{{:Team:Heidelberg/Templates/MM_week22p}}<html>
-                                </p>
-                            </div>
-                            <div class="tab-pane" id="z17">
-                                <p style="font-size:12pt; text-align:justify;">
-                               </html>{{:Team:Heidelberg/Template/Del_week17_Gibson}}<html>
                                  </p>
                              </div>
+                          </div>
                         </div>
@@ Line 919: / Line 691: @@
          </div>
      </div>
+</div>
 </div>
 </html>
+{{:Team:Heidelberg/Templates/Footer-Nav}}
 {{:Team:Heidelberg/Templates/Footer-MMCoA}}

Team:Heidelberg/Delftibactin/MMCoA

From 2013.igem.org

Latest revision as of 09:42, 18 October 2013

Team

Project

Notebook

Parts

Software

Human Practice

Safety

Modeling

Methylmalonyl-CoA Pathway. Making the whole thing work.

Week 6

Week 7

Week 8

Week 9

Week 10

Week 11

Week 12

Week 13

Week 14

Week 15

Week 16

Week 17

Week 18

Week 19

Week 20

Week 21

Week 22

Graphical Abstract

Goal

2013-06-03

2013-06-04

2013-06-05

2013-06-06

2013-06-07

2013-06-08

2013-06-09

2013-06-10

2013-06-11

2013-06-12

2013-06-13

2013-06-14

2013-06-15

2013-06-16

2013-06-17

2013-06-18

2013-06-19

2013-06-20

2013-06-24

2013-06-25

2013-06-26

2013-06-27

2013-06-28

2013-06-29

2013-06-30

2013-07-01

2013-07-02

2013-07-03

2013-07-04

2013-07-05

2013-07-06

2013-07-08

2013-07-09

2013-07-10

2013-07-11

2013-07-12

2013-07-13

2013-07-14

2013-07-15

2013-07-18

2013-07-22

2013-07-23

2013-07-22

2013-07-23

2013-07-24

2013-07-25

2013-07-26

2013-07-28

2013-07-29